Tenders Are Invited For Adaptation Of Existing Measurement Systems In Gsr_1 And Gsr 2 Stations To A Protection System Against Introducing Generated Electricity Into The Distribution Network

The Subject Of The Order Is: 1. Preparation Of Design Documentation And Its Approval At Pge Dystrybucja Sa Rzeszów Branch - The Scope Of The Project Is To Adapt The Existing Measurement Systems In The Gsr_1 And Gsr 2 Stations To A System Of Protection Against Introducing The Generated Electricity Into The Distribution Network (Protection System Against Introducing The Generated Electricity Into The Network After Behind The Scope).2. Delivery Of 3 Pcs. Three-Winding Current Transformers, Class 0.2S, With Legalization Documents And Installation In The Existing Mv Gsr Switchgear, Section I, Rzeszów University Of Technology 3. Delivery Of 3 Pcs. Three-Winding Current Transformers, Class 0.2S, With Legalization Documents, And Installation In The Existing Mv Gsr Switchgear Section Ii Rzeszów University Of Technology 4. Delivery Of 1 Piece Of Three-Winding Current Transformers, Class 0.2S With Legalization Documents - Reserve5. Delivery Of 3 Pieces Of Four-Winding Voltage Transformers, Class 0.2S, With Legalization Documents And Installation In The Existing Mv Gsr Switchgear, Section I, Rzeszów University Of Technology 6. Delivery Of 3 Pieces Of Four-Winding Voltage Transformers, Class 0.2S, With Legalization Documents, And Installation In The Existing Mv Gsr Switchboard Section Ii Rzeszów University Of Technology 7. Agreement In Pge Distribution Unsealed / Sealing Of The Measurement System, 8. Delivery And Wiring Of Current And Voltage Transformer Circuits On Measuring Strips (Wago)9. Replacement Of Existing Sk Strips With New Strips (Wago) In Accordance With The Applicable Guidelines Of Pge Dystrybucja10. Installation Of Additional Protections For The Secondary Circuits Of Voltage Transformers In Accordance With The Requirements Of Pge Dystrybucja11. Delivery And Installation Of Two Network Parameters Analyzer/Recorder For Sections I And Ii With An Ethernet Communication Interface, E.G. Nd45 In Class A/S Or Better.12. Collection And Disposal Of Dismantled Current And Voltage Transformers13. Expansion Of The Existing Line Bay In Section Ii For Auxiliary Needs, Along With The Delivery And Installation Of A 15/0.4Kv (3F) Transformer With A Power Of Not Less Than 15Kva And Fuse Link Protection,14. Delivery And Construction Of The Gr_R Switchgear Equipped With An Ats System, Min. 40A (Primary Power Supply For The Gsr_I Transformer And Reserve Power Supply For The Auxiliary Transformer Gsr_Ii) From Which The Analyzers/Recorders And The Management System Will Be Powered. Switchboard Gr_R N/T, Equipped With An Szr Switching System Min. 40A, 2X100a Circuit Breaker, 2Xphase Indicator With Protection, Overcurrent Circuit Protection 1F C10a - 4 Sets, 1F C16a - 2 Sets, 3F B16a - 3 Sets, 15. Acceptance Of Measurement Systems By Pge,16. Preparation Of As-Built Documentation In Paper And Electronic Form .Pdf, .Dwg, .Dxf.17. Preparation Of Operational Instructions And Agreement With Pge. 18. Retrofitting Switches With A Switch Position Status System - Mv Switchgears Of The Rotoblok 24 Type, Including Connection And Commissioning In The Ordering Partys Scada19 System. Measurements - As-Built Documentation