Tenders Are Invited For Skip Loaders - Purchase And Delivery Of A Brand New Articulated Loader For The Needs Of The Waste Management Plant In Korczów In Connection With The Modernization, Expansion And Reconstruction Of The Zzo In Korczów, Which Is Ipok

Skip Loaders - Purchase And Delivery Of A Brand New Articulated Loader For The Needs Of The Waste Management Plant In Korczów In Connection With The Modernization, Expansion And Reconstruction Of The Zzo In Korczów, Which Is Ipok. Purchase And Delivery Of A Brand New Articulated Loader For The Development Plant Waste In Korczów With The Following Parameters: General Parameters Of The Wheel Loader: 1. Year Of Production – Min. 2023, 2. Operating Weight - Ranging From 19,000 To 24,500 Kg, 3. Brand New Charger, Engine 4. Engine With Power Ranging From 170 Kw To 205 Kw With A Capacity Ranging From 6 Dm3 To 7.7 Dm3 5. Maximum Torque – Minimum 1100 Nm, 6. Number Of Cylinders – Min. 6, 7. Diesel Engine Meeting Exhaust Gas Standard Stage V, Without Egr Valve Or With Egr Valve 8. Start-Up System Chargers During Periods Of Low Temperatures. 9. Automatic Speed Reduction/Increase Engine Idle Speed 10. Automatic Radiator Return Fan Gearbox 11. Torque Converter Or Hydrostatic Transmission 12. Automatic Gearbox With Possibility Of Changing Gears Under Load 13. In The Case Of A Loader With A Gear 4-Speed Requires An Intelligent Clutch Disengagement System In The Case Of The Gearbox 5-Speed – Torque Converter Lock. Braking, Hydraulic And Steering Systems 14. Multi-Disc Oil Braking System On Both Axles, Hydraulically Actuated 15. Hydraulic System With A Capacity Of Min. 236 L/Min, 220 Bar, 16. Opening And Closing Buckets Via Two Actuators 17. Control Of Accessories And Travel Direction With One Joystick 18. Articulated Frame 19. Additional Hydraulic Function In The Joystick To Operate The Bucket With A Pressure Of 20. Fuel Tank With A Capacity Of Min. 255 Liters 21. Ad-Blue Fluid Tank Min. 15 Liters Chassis, Cab 22. Front Axle Rigid Drive, Rear - Swinging, Additionally Reinforced Bridges Enabling Assembly 23 Solid Tires. Front Axle With 100% Differential Lock Activated Automatically, Rear Axle Without Differential Lock (Limited Lsd Axles Are Not Allowed Slipping), 24. Wheelbase – 3200 – 3450 Mm 25. Ground Clearance Under The Machine – Min. 354 Mm 26. Height From The Ground To The Highest Point Of The Cabin – Maximum – 3.80 M 27. Closed Cabin Meeting Current Rops – Fops Requirements With Heating And Air Conditioning, Heating Rear Window, Front And Rear Window Wipers 28. Suspended Operators Seat, Integrated With Armrests And Loader Arm Control Joystick, Equipped In Seat Belts. 29. Maximum Sound Pressure Level At The Operators Station - 69Db 30. Min. 2 External Rearview Mirrors And Minimum 1 Internal Rearview Mirror 31. Additional Cabin Carbon Filter 32. Boom And Shift Control Lever Direction Of Travel Bucket 33. The So-Called Bucket High Discharge With A Capacity Ranging From 3.50 M3 To 4.20 M3 With A Double-Sided, Divided Strip Made Of Hb500 Steel, Adapted To Work With Material With A Density Of Up To 1200 Kg/M3 34. Full Drop Height At An Angle Of 45˚ – Min. 4.60 M Enabling Loading Of Cars In The So-Called Moving Floor 35. Dump Height To Bucket Rotation Pin Min. 4.009 M 36. Steel Piston Rod Cover Bucket Tilting Cylinder 37. Equipped With An Additional Loaded Weighing System Material With A Display Installed In The Cabin With The Possibility Of Printing 38. Automatic Bucket Positioning And Amortization System 39. Boom Operating System Z-Bar Type Additional Information 40. Non-Progressive Or Progressive Automatic System Central Lubrication With Solid Grease 41. Reversing Camera And Sound Signaling Reversing, 42. At Least 2 Buttons (Shortcuts) For The Most Frequently Used Functions Located At The Joystick Integrated With The Loader Monitor 43. Led Work Lights Located Below The Roof Line At The Front (4 Pcs.) And Rear Of The Cabin (2 Pcs.) And A Warning Light The So-Called Beacon, 44. Metal Covers For Front And Rear Work Lights 45. Box Cover Gears - Lower And Side, 46. Factory Remote Monitoring System (Telemetry, On-Line With Gps Location) Taking Into Account E.G. Working Time, Efficiency, Real Fuel Consumption, With Subscription For At Least 3 Years 47. L5 Class Pneumatic Tires. Note: The Manufacturer Must Take Into Account The Possible Installation Of Solid Tires In The Scope Of Any Subsequent Complaints Or Warranty Repairs. The Use Of Solid Tires Cannot Exclude You From Having Them Warranty For Any Charger Components. 48. Equipped With A Factory Towing Hitch 49. Training: At Least 2 Persons Indicated By The Ordering Party In The Amount Of At Least 4 Hours For Each Person - Confirmed By A Document From The Exhibitors Representative For Each Person Trained Person. The Charger Will Be Delivered By The Contractor And At Its Expense To Waste Management Plant In Korczów Near Biłgoraj (Implementation Costs Orders - Loading, Delivery, Unloading, Should Be Included In The Offer Price). The Charger In Question Should Be A Brand New (Unused) Device, Year Of Manufacture: Min. 2023. It Should Have The Documents Required By Law And A Document Specifying The Conditions Warranty And Post-Warranty Service, User Manual (All Documents Prepared In Polish). The Contractor Will Provide All Documents Regarding The Device To The Ordering Party On The Day The Device Is Delivered For Collection. Required Warranty Period – Minimum 36 Months Or 4000 Mtg, Whichever Comes First, Counted From The Date Of The Protocol Acceptance On The Supplied Device. The Contractor Will Provide An Authorized Mobile Service For The Delivered Items Devices With Access To The Ordering Party. The Service Will Be Carried Out In Accordance With General Regulations Warranty Conditions. In The Event Of A Reported Failure During The Warranty Period, Travel Costs Will Be Charged To The Ordering Party And Any Transport Of The Vehicle To The Service Center Is Covered By The Contractor. Costs Of Periodic Required Inspections Including All Consumables Scheduled For Replacement In The Warranty Card For A Given Inspection During The Period Warranty Is Covered By The Contractor.