Tenders Are Invited For Metalworking - Conversion Of Pachyderm House (Outdoor Areas) | Ve36 - Locksmith Work Clamps And Gate System Plant Trough

Metalworking - Conversion Of Pachyderm House (Outdoor Areas) | Ve36 - Locksmith Work Clamps And Gate System Plant Trough. Bollards Made Of Reinforced Concrete Are Used To Secure The Elephants Enclosure Vertically Diameter Of 40 Cm. A Bollard Has A Diameter Of 46 Cm. The Bollards Are Divided Into Two Areas, Bollard Areas 1 And 2 In The West Enclosure. The Horizontal Enclosure Is Secured Using Ropes That Are Equipped With Electricity. Clamps With Projections And Eyelets In Different Sizes Are Used To Guide The Rope Arrangement Mounted On Selected Bollards. In Total It Should Be Possible To Have 5 Ropes Temporarily Tensioned At A Horizontal Distance Of 50 Cm. Tighten Around The Ropes To Be Able To Do This, Cable Tensioners With Anchor Plates Are Placed On The Adjacent Walls. Part Of The Tender Also Includes The Insulators, Which Are Intended To Ensure That: The Incoming 10,000 Joules Remain On The Ropes. The Bollards, The Rope Tensioners Preserved, As Well As The Wall Areas On Which The Anchor Plates Are Mounted A 10 Cm Thick Application Of Artificial Rocks. Power Supply And Artificial Rock Work Are Not Part Of The Tender. The Arrangement Of The Clamps On The Individual Bollards May Vary Slightly And Deviate From The Existing Static Plan. In Advance This Has Been Discussed With The Statics And Is Problem-Free To A Certain Extent. Another Part Of The Tender Is A Gate System In The Outdoor Enclosure. This Gate System Is To Be Carried Out In An Elephant-Proof Manner. Static Calculations For Gate And Vertical Enclosure Security Are Included In The Tender. The Work And Assembly Planning Are Based On These Principles To Create. The Vob/C Is Part Of The Contract. Proof Of Suitability Is Included In The Offer Documents To Add.