Tenders Are Invited For Construction Work - Modernization Of Szte Szakk 410-Bed Clinic

Construction Work - Modernization Of Szte Szakk 410-Bed Clinic. The Building Affected By The Construction Investment Is The Szte Szakk 410-Bed Clinic, Which Its Total Net Usable Floor Area Is 23,710.38 M2. Place Of Implementation: 6725 Szeged, Semmelweis U. 6., Hrsz.: 20294/1 The Structure Of The Building Is A Reinforced Concrete Pillar Frame, 6 M With Raster Spacing. The Facade Wall Sections Are Made Of Reinforced Concrete Panels. With The Well Foundation The Loads Of The Structure Are Transmitted By Wells Lowered By Sinking To The Deep-Lying Load Carrier To Subsoil. Examining The Function-Size Requirements Of The Hospital, Miklós Marosi Is The Facade Solved The Situation By Manufacturing A Unique Facade Panel. The Larger Superficial There Is A Concrete Surface Panel On The Facade Section, While The Parapets Of The Doors And Windows Prefabricated Panel Structures Made Of Small Solid Bricks. The Prefabricated Panel Is In The Middle A 10 Cm Thick Thermal Insulation Layer Was Placed On The The Doors And Windows Are Mostly Wooden They Have A Case Structure, Equipped With Two Layers Of Heat-Insulating Glazing. On The Facade Section Some Metal Doors And Windows Can Also Be Found. The Facade Doors And Windows Are Installed On The Outside They Are Supplemented With A Textile Shade. The Existing Curtain Walls Are Also Outdated Wood They Have A Case Structure. The Building Complex Is In Good Condition For Its Age. The Flat Roof Structures They Are Made Of Outdated Materials With Little Thermal Insulation Thickness. With The Flat Roof Structure Buildings And Parts Of Buildings With The Door And Window Structures Out Of Date, Required For Structures With Modern And Insulated Glazing Replace Them. Additional Thermal Insulation Of The Facade Is Required. The Buildings Are Barrier-Free Approach And Access To Parts Of The Building Are Partially Solved. The Building Is The Current One Complies With Disaster Prevention Regulations, The Complex In The Building Was Designed In 2015 Due To Internal Remodeling Works. The Winning Tenderer Has The Construction During The Implementation Of The Investment, The Following Renovation Works Must Be Carried Out: A) Architectural Works: • Demolition Works In Connection With The Facade • Curtain Wall Foundation Works According To Static Design Plans • Subsequent Facade Insulation With 20 And 26 Cm Thermal Insulation Rockwool Mineral Fiber Thermal Insulation Covered With A Glass Veil, Plinth Thermal Insulation 20 Cm Thick Xps Thermal Insulation. Amount Of Facade Thermal Insulation: 9118 M2 • Shutters Replacement: Instead Of The Existing Doors And Windows, Aluminum With 3-Layer Insulated Glazing Windows Are Installed. The Designed Curtain Wall Systems In Full Cross-Section They Are Made Of Thermal Bridge Breaking Aluminum Profile With Glued Safety Glass. • New Flat Roof Layer Order 15+10=25 Cm With Subsequent Thermal Insulation, New Waterproofing, And With Stratification. (Before Carrying Out The Thermal And Waterproofing Works On The Roof, Technical Equipment According To The Description Must Be Removed, And Then The New Layering Must Be Created Must Be Replaced Afterwards.) Amount Of Roof Insulation: 1762 M2 • External Shading The Offices, Surgeries And Wards Are Shaded By The Metal Lamellas Placed In The Thermal Insulation Provided By Blinds. B) Building Engineering: • Air Conditioning Installation Work • Relocation Of Split Air Conditioners • Ventilation: Installing And Removing Grilles C) Building Electricity: • Lighting System Modernization And Power Supply And Control Of Electrically Operated Blinds The Task. D) Fire Protection: • Fire Alarm Included In Fire Protection Plans And Budgets System Revision Planning, Fireproof Window Opening Wings, Single-Wing Door And Double-Leaf Door Supply With A Drive Motor And Connection To The Fire Alarm System. The Execution Plan Documentation Covering All Disciplines Forms Part Of The Public Procurement Documentation. The Detailed Conditions Can Be Found In The Public Procurement Documentation And Its Annexes (In Particular Technical Description, Unpriced Budget) Are Included. *** Bidder 321/2015. (X. 30.) Govt. Decree, On The Basis Of Section 46 (3) States That If The Public Procurement A Sufficiently Precise And Comprehensible Description Of Its Subject Made It Necessary, Both In The Invitation And For Things Of The Make Or Origin Specified In The Documentation, Or For A Specific Procedure, Or Trademark, Patent, Activity, Person, Type Or Particular Origin Or The Application Of A Specific Reference Or Reference To A Production Process Is The Only Subject Was Made In Order To Clearly Define Its Nature, The Contracting Authority 321/2015. (X. 30.) In Accordance With The Rules Of The Government Decree, Equivalent Performance As Well Accept. The Bidder Confirms The Equivalence In The Technical Description And/Or The It Examines The Parameters Specified In The Unpriced Budget.