Tenders Are Invited For Recirculating Coolers - Air-Cooled Circulating Bath

Recirculating Coolers - Air-Cooled Circulating Bath. Subject Of Purchase: Ak 1 Piece, New, Manufactured By Optimol Instruments Prüftechnik Gmbh 2Disk Type, For Sliding-Rolling Surface Testing Equipment, Test Specimens For The Transport Of An Air-Cooled Circulating Bath (Device) For Its Cooling And Heating, Requests An Offer For Installation And Commissioning, And Training In Use. The Device New, If All Of Its Elements Are First Commissioned: It Has Not Been Installed/Commissioned Before Neither In Hungary Nor Abroad, As A Demonstration Or Test Device Was Not Used Either. Ak Informs Ats That In The Invitation, As Well As In The Further Public Procurement According To The Specified Standard Included In The Documents Or To Make, Only The Object It Was Done In Order To Clearly Define Its Nature. Ak 321/2015. (X. 30.) Govt. On The Basis Of Article 46, Paragraphs (3)-(6) Of The Decree, A Product That Is Equivalent In All Respects - Or Compliance With An Equivalent Standard - Accepts, If Specified For Meets Minimum Requirements. At The Same Time, The Verification Of Equivalence Is The Responsibility Of The At And Risk. Main Requirements: • A Constant Temperature Of At Least -10 ˚C With The Device To Be Delivered Roller Temperature Can Be Ensured. • The Device To Be Delivered Must Be Stationary, Fit In A Space No Larger Than 500 Mm X 450 Mm • The Device To Be Delivered Circulate Coolant In A Tank Of At Least 5 L, Continuous Line Do Not Need To Introduce Water • The Coolant In The Device To Be Delivered Is Operational Temperature: Can Be Set To A Value Between -80...100°C • In The Device To Be Delivered The Temperature Stability (At -10°C) Should Be At Least 0.02 K. • The Device To Be Delivered Its Heating Power Must Be At Least 1.5 Kw. • The Cooling Performance Of The Device To Be Delivered O At 100°C: At Least 0.5 Kw O At 20°C: At Least 0.5 Kw O At 0°C: At Least 0.5 Kw O - At 20°C: At Least 0.4 Kw O - At 40°C: At Least 0.3 Kw O - At 60°C: At Least 0.3 Kw O - At 80°C: At Least 0.06 Kw. • For The Delivered Device 1 Phase (230 V) Be Able To Connect. • The Noise Emitted By The Device To Be Delivered Is Below 75 Db Be. • The Device To Be Delivered Must Have Ethernet, Usb, Rs232 Connectors. At The Same Time As The Delivery Of The Device, At Is Obliged To Carry Out The Corresponding, Intended Use All Documents, Documentation, License Certificates Necessary For Use, Hungarian And/Or English-Language Handling (Use) And Maintenance Instructions, Manufacturers Compliance Statement Regarding Marketing, Warranty, Product Support Transfer Information To Ak Or Make It Available Electronically. Conditions, Tasks: • Fulfillment: Includes Delivery, Installation, Commissioning, Training. O Delivery And Installation (Performed By At At The Site Specified As The Place Of Performance By Ak); O Commissioning - In Which Ak Also Participates - At Is Carried Out By Ak As The Place Of Performance On Site; O Training (At The Site Specified As The Place Of Execution Of The Ak):  Min. 1 Working Day (8 Lessons/Working Day; 45 Minutes/Lesson), For At Least 2 People; • Completion Deadline: The 150Th Calendar Day From The Conclusion Of The Contract (If This Is Not A Working Day, Then The Following First Working Day). • Warranty (From Commissioning): At Least 18 Months O Service Work - Start Of The Device By The Dedicated Contact Person: Starting From The Notification Max. 3Rd Working Day. Dedicated Contact Person: To Be Named By At When Concluding The Contract Avoiding Problems Arising Specifically Within The Scope Of The Warranty Obligation Of This Contract In The Case Of Ak, On ​​Working Days Without Restrictions, A Directly Available Specialist, Who Starts The Service Work Within The Prescribed Deadline. Ak Does Not Makes It Possible To Make Offers For Parts, Because The Device To Be Procured From A Technical Point Of View It Forms A Unit, Physically 1 Piece Of Equipment (With Prescribed Equipment And For Its Operation With Necessary Equipment And For Connection To The Previously Delivered System With Necessary Accessories), In Respect Of Which No Division Into Parts Can Be Interpreted (Article 50 (1) Point I) Of The Commercial Code). Because The Recommended/Delivered Device Is The Manufacturer Compiled By With Equipment Corresponding To The Undertaking, In Accordance With Expectations 1 Set Of Equipment, Which Can Only Be Interpreted As A Technical Unit, Can Be The Subject Of The Delivery Or The Contract. At Is Responsible For The Object Of Delivery, As The Correct Functioning Of A Technical Unit Ensuring The Requirements, Thus The Object Of The Purchase Appropriate Production Of The Forming Device Or Compilation, In Accordance With The Individual Regulations Assembly Or Installation With Accessories. Delivery And Installation Are Relevant Due To Liability Rules, It Also Cannot Be Separated From The Content Of The Purchase. Also Due To The Rules Of Responsibility, The Educational (Training) Task Can Only Be Carried Out By At Can Be Carried Out, Since It Can Only Be Assigned To The Operating Staff After It Has Been Verified Bear The Risk Of Damage. Thus, The Nature Of The Procurement And Related To The Contract Additional Circumstances Do Not Allow Bidding For A Part Of The Public Procurement (Article 61 (4) Of The Civil Code).