Bids Are Invited For Acquisition Of Medical, Hospital, Dental Equipment And Common Goods To Meet The Demands Of The Municipal Health Department And Its Departments.

Dental Office (Chair, Equipment, Reflector, Auxiliary Unit Attached To The Chair). Dental Office, Being A Set Of Compatible Equipment Produced By The Same Manufacturer, Composed Of The Components Listed Below: Dental Chair. Structure Made Of Steel. Anti-Corrosive Treatment. Smooth Epoxy Or Electrostatic Painting. Static And Dynamic Stability In All Positions Of Use At Its Maximum Capacity. Base With Rubber Protection Or Similar Material. Upholstery Covering In Laminated Pvc Material, Seamless, In Light Green Color. Plastic Protection For The Patients Feet. Chair Arm With Shape And Fixing That Facilitates Patient Access. Articulating Headrest, With Longitudinal Movement. Activation Through Electrical Commands With Hydraulic Actuators Or Gearmotors. Foot Control (Pedal) For The Up And Down Movements Of The Seat And Back. Electrical Supply 110 Or 220 V (60 Hz), According To The Local Network Of The Delivery Municipality. Minimum Load Resistance Of Approximately 140 Kg. Supply Of Floor Plans And Others Necessary For The Perfect Installation Of The Equipment, With All Information On Electrical, Hydraulic And Pneumatic Supplies. Supply Of Operation Manuals And Service Manuals With Exploded View And Details Of Parts, Main Defects And Corrections, With Diagrams Of Electrical, Mechanical And Hydraulic Systems. Minimum 12 Month Assembly Warranty. Cart Or Attached Dental Equipment. (Cart Type With Structure Mounted On Castors And Anticorrosive Treatment. Coupled Type: Articulated Arm, With Horizontal Movement, With End Stops And Vertical Movement). Three Terminals, 01 For Micromotor, With Spray (Borden Type), 01 For High Rotation (Borden Type) And 01 Triple Syringe. Tip Support With Individual And Automatic Activation. Epoxy Or Electrostatic Painting, Completely Smooth. Water Duct Disinfection System And Spray With Anti-Backflow Valve. Equipment Drive Pedal..., Horizontal Table Autoclave: Capacity For 42 Liters. Horizontal Tabletop Autoclave Minimum Capacity Of 42 Liters. Fully Automatic Control Which Must Be Performed Through Microcontroller Temperature Selection: 120 To 134°C Cycle: Up To 60 Minutes. Drying Time: Up To 45 Minutes. Precision And Resistance Time: Type Pt 100. Hydraulic System And Vacuum Pump: With Bronze Filter, Stainless Steel Filter Elements. Solenoid Valve: Diaphragm Type Forged Brass. Safety Valve: Built In Brass. Chamber: It Must Be Made Of Stainless Steel, With A 3-Year Warranty And Externally Coated With Heat-Insulating Material Which, In Addition To Optimizing Its Energy Consumption, Must Maintain The Ambient Temperature. The Addition Of Water To The Internal Chamber Of The Autoclave Must Be Automatic, As Well As The Cycle Must Be Automatic. Tray: Made Of Stainless Steel, Fully Perforated, To Allow Good Steam Circulation. Lid/Door: In Stainless Steel, Laminated, With A 3-Year Warranty, With A Silicone Rubber Sealing Ring Resistant To High Temperatures. Door Closing System Device That Prevents The Equipment From Operating With The Door Open. It Must Be Constructed Robustly And Internally Equipped With A Thrust Bearing That Provides Greater Safety And Smooth Handling. Cables: Must Be Bakelite (Heat Insulated). Resistance: Must Be Ní