Request For Quotation Purchase Of Materials (Left Cos)

Technical Description The Component Of The Safety System Has At Least 5 Anchor Points Of Attachment: Two Anchor Points, One Of Which Has A Freely Rotating Ring (To Prevent The Sling From Twisting) On ​​The Chest For Lifting Along The Support Body And Moving Along The Traverses, One Anchor Point On The Back In The Form Of An Easily Accessible And Self-Centering D-Shaped Ring, Two Lateral Ones In The Form Of A Curved D-Shaped Ring For Convenient Fixation Of The Positioning Sling. All Attachment Points Must Be Made Of Light Aluminum Alloy. All Safety Harness Buckles Must Be Automatic, Self-Locking With A Double Safety Device. The Upper Part Of The Back Should Be Adjusted With Buckles. The Mounting Belt Must Have A Floating Structure That Allows Protecting The Electricians Organs In The Event Of A Fall. The Mounting Belt Of The Safety Harness Must Be Sewn From A Specialized Thermoformed Material Consisting Of Foamed Polyamides. The Mounting Belt Must Have Service Loops For Fixing Safety Systems Made Of Rubberized Material, Additional Nylon Rings For Fixing Mounting Tools, And A Retainer For The End Of The Positioning Sling. The Hip And Shoulder Straps Of The Safety Harness Must Be Polyester With A Width Of At Least 45 Mm. The Strap Tape Must Be Elastic And Water-Repellent. The Tether Must Have At Least 2 Fall Indicators. The Safety Tether Must Have An Operating Manual, A Passport And A Control Sheet. The Life Of The Safety Tether Is Not Less Than 9 Years, Subject To Compliance With The Conditions Of Storage And Operation Of The Manufacturer Gost 32489-2013, 9,200.00