Tenders Are Invited For Construction Work For Dams, Canals, Irrigation Channels And Aqueducts - Che Vanatori. Modernization And Safety Works Of The Adduction Channel. Works Execution Contract

Construction Work For Dams, Canals, Irrigation Channels And Aqueducts - Che Vanatori. Modernization And Safety Works Of The Adduction Channel. Works Execution Contract. The Vanatori Hydropower Development Is Part Of The Development Of The Bistrita River In The Sector Piatra Neamt – Bacau, Being Delimited Upstream By The Development Of Piatra Neamt, And In Downstream Of The Development Of Roznov. Starting From Che Piatra Neamt And Up To Che Racova All The Power Plants Are Located On The Channel. Currently, They Are Found At The Adduction Channel The Following: Degraded Concrete, Cracks, Degradation Of Seals, Deposits Of Sediments, Areas With Large Exfoliation, Displacement Of Plates, Degradation Of The Eraser And Walls, Subsidences And Surprises Of The Berm, Landslides On The Left Bank, Etc. From The Resulting Data, From The Follow-Up In Operation Over Time Of Constructions And Intervention Works Achieved Up To Now, The Necessity Of The Execution Of Works On The Whole Is Found Supply Channel, To The Loading Chamber, Respectively The Sealing Joints Between The Plots Of The Loading Chamber Have Deteriorated Over Time, Leading To The Appearance Of Infiltrations On The Outer Slope Of The Loading Chamber Filling. In Addition To The Works Of Construction Works Are Also Needed To Rehabilitate Some Hydromechanical Equipment Located At The Collection Outlet, Loading Chamber, Che Pressure Node. A. Works Of Constructions: A. The Complete Restoration Of The Wall In The Area Of ​​Level Variation Of Water In The Channel (308.25-306.6)Mdm, By Re-Concreting The Slabs; B. Repair Of Cracks And/Or Cracks In The Wall Plates Permanently Located Below The Minimum Water Level From The Canal; C. Remediation Of All Joints Permanently Located Below The Minimum Level Of Canal Water; D. Remediation Of The Concave Areas Of The Channel; E. The Remedy Cracks In The Adduction Backfill; F. Fixing The Vertical Joints Between The Panels Loading Room; G. Remediation Of Joints And Boards With Defects In The Room Of Loading. H. Consolidation Of The Left Bank Slope From Km 6+700, Over A Length Of 500M; I. Construction Of Access Roads And Platforms For The Completion Of The Entire Works Length; J. Bringing The Crowning And Berm Of The Dike Back To Its Original Condition And The Lands Affected By The Implementation Of The Modernization And Installation Works In Safety. B. Rehabilitation Works Or Procurement Of Hydromechanical Equipment Related To The Following 2 Areas: 1. Hydromechanical Equipment From The Water Catchment Outlet (Called Reconstruction): A. Manufacturing/Acquisition And Replacement Of Vertical Grills With Horizontal Grates; B. Manufacturing/Acquisition And Installation Of The Cleaning Machine Grills; 2. Hydromechanical Equipment At The Loading Chamber/Pressure Node Of The Plant Hydroelectric: A. Manufacturing/Acquisition And Replacement Of Dense Grates And Rehabilitation Grill Cleaning Machine; B. Rehabilitating The Pilasters From The Loading Room; C. Rehabilitation Of The Flat Valves And The Operating Crane; D. Valve Rehabilitation The Bottom And The Hook Beam, Including The Actuation Mechanisms; E. Manufacturing/Procurement And The Replacement Of The Heating Installation Of The Bottom Valve Guides And The Unloader Gate. F. Rehabilitation Of Forced Pipelines; G. Rehabilitation Of The Hoods From The Vacuum Cleaners Turbines; C. Related Services: For All Equipment That Requires Manufacturing/Procurement Or Rehabilitation, Related Services Will Be Provided. Related Services Shall Mean: - Ensuring Compliance With The Requirements Of The Technical Project - Volume 2B (Chapter 3.1), Regarding The Preparation By The Contractor By Certified Personnel Of The Following Documentation Technical: • Execution Details (Execution Project, Assembly Documentation, Documentation Regarding Packaging, Transport And Storage..Etc); • Accompanying Documentation A Equipment/Facilities (Factory Projects After Manufacturing With The Values Exact Results, Operation And Maintenance Instructions, Sample Instructions And Pif, Books And Technical Sheets...Etc) ; • Final Documentation Compliant With The Execution / Documentation As Built; - Ensuring Manufacturing/Procurement Or Rehabilitation, Transport, Dismantling The Old Equipment And Ensuring The Assembly Of The New Equipment, Carrying Out Tests Technological, Commissioning And Staff Training On The Part Of The Beneficiary For The Proper Use Of Rehabilitated/Manufactured Installations; The Way Of Estimate Of The Contract Price: A) Construction Works Regarding Safety And The Modernization Of The Adduction Channel: 52,371,050.00 Lei Without Vat, Of Which C+M = 52,371,050.00 Lei Without Vat Chapter 1.3. Arrangements For Environmental Protection And Bringing At The Initial State = 20,585.00 Lei Without Vat Chapter 4. Basic Investment = 51,997,710.13 Lei Without Vat - Pipeline = 48,299,528.18 Lei Without Vat - Slope Stabilization Left = 3,698,181.95 Lei Without Vat Chapter 5. Site Organization = 352,754.87 Lei Without Vat B) Works Regarding The Rehabilitation Of Equipment/Facilities: 7,451,312.00 Lei Without Vat, Of Which C+M: 3,388,550 Lei Without Vat The Values ​​Mentioned In The Sub-Chapters Detailed In Points A) And B) Are Considered Maximum And Cannot Be Exceeded. Entity The Contractor Requests A Site Visit To Evaluate All The Conditions That Could Influence The Offer.