Bids Are Invited For Furniture

Industrial Electric Drinking Fountain 4 Taps Specification: Made Of Stainless Steel; 04 (Four) Front Taps; With Refrigeration Through A Compressor, With Four Taps, Three With A Jet Spout For The Mouth And One For A Cup, Both With Water Jet Adjustment, In Stainless Steel; Have A Reservoir With A Capacity Of At Least 180 (One Hundred And Eighty) Liters With A Filtration System Using An Activated Carbon Filter That Must Accompany A Drinking Fountain; Its Entire Body Is Closed, Without Openings And Covered Internally And Externally In 304 Stainless Steel; It Has A Front Water Dispenser Made Of Removable Stainless Steel Plate For Emptying Or Sanitizing; Have A Drain On The Back; Have An Inmetro Seal With A Valid Certificate Through Ordinance No. 344, Which Requires That Equipment For Water Consumption Must Be Manufactured And Sold In Accordance With The Approved Requirements And Duly Registered With Inmetro. Have A Minimum Warranty Of One Year. Present Inmetro Certificate Along With The Price Proposal, Under Penalty Of Disqualification., Industrial Blender Stainless Steel 6 Liter Specification: Robust Structure Made Of Stainless Steel 430, Motor 1/2 Hp, Or Higher; Minimum Rotation 3,500 Rpm, Minimum Frequency: 60Hz; Voltage: 220V; Monoblock Cup Without Welding, With Smooth Surface, Free From Microcracks And Inclusions, Made Of Brushed Stainless Steel, With Handle, With Perfect Finish, Free From Sharp Corners Or Burrs On Its Edges, Or Any Other Defects Harmful To Its Use, Easily Cleanable And Resistant To Corrosion And Acidity; Have A 304 Stainless Steel Safety Shield For User Safety; Non-Toxic Rubber Lid With Lock (For Good Sealing Against The Cup) And A Removable Lid For Adding Ingredients; Have An Individual On And Off Switch; Minimum Power: 1000W; Voltage: 220 V Bivolt; With At Least Twelve Months (1 Year) Of Warranty Against Defects Or Manufacturing Defects. Certified By Inmetro And In Accordance With Nr 12;, Industrial Stove With 06 (Six) Burners Specification: Low Pressure With Reinforced Structure In Special Carbon Steel Electrostatic Painting; Six Reinforced Carbon Steel Grilles Measuring At Least 300 X 300 Mm; Have 30X30 Cm Cast Iron Grates And Double Gas Burners With A Diameter Of At Least 150 Mm In Extra Reinforced Cast Iron, Removable For Cleaning; Chrome-Plated Steel Registers With Gas Valves For Adjusting The Flame, High Or Low, With Double Control And Individual Flame Control Through Manual Ignition; Waste Collection Trays, Stainless Steel Control Panel; Individual Bakelite Knobs For Crown And Pipe With Gradual Flame Adjustment; Upper And Lower Structure In 70Mm Profile With Mesh Shelf And Structural Steel Uprights; Feet With Shoes In Polyamide 6.0 (Nylon); Natural Gas Or Lpg Supply (As Required) Through Steel Piping Connected To The Burners And Control Registers Gas Pressure: Lpg: 285Mmca/ Gn: 200Mmca; Colour: Black With Twelve Months (1 Year), Warranty Against Defects Or Manufacturing Defects., Typhoon Column Fan 60 Cm Minimum Specifications: Modern Design, With Crossed Foot, 3 Speeds, Model: Column With Minimum Height Of 120Cm And Maximum 175Cm; Color: Black, Oscillating Right And Left; Treated Steel Grids Painted Black And Removable, With Thermal Protector, Thin Polypropylene Helix; Have A Motor With A Bearing And A Minimum Power Of 145 W; Procel Seal