Hinged Mechanism For A Quick-Release Bucket, Inversion Angles Of The Bucket: In The Upper Position Of The Boom No More Than 67 , In The Ground - No Less Than 66 . The Hydraulic System Of The Loader Is Hidden Inside The Boom And Cross Beam, The Ovoid Section Of The Boom Is Made Of Steel With A Thickness Of At Least 4 Mm. Powerful Stretchers. The Beams Of The Stretchers Are Made Of Steel With A Thickness Of At Least 14 Mm. The Rack Of The Subframe Is Made Of Steel Of Not Less Than 30 Mm And Is Connected To The Beam With A Box Not Less Than 10 Mm Thick. The Beam On The Rear Axle Distributes The Load Over The Entire Tractor Frame. All Hinged Joints Are Lubricated Through Press Oilers. A Frame For Installing A Tool With Euro Fixings (Euro/Sms) Of Any Manufacturer. Technical Characteristics - Load Capacity In The Upper Position (At A Pressure In The System Of 18 Mpa), Kg - Not Less Than 1200, Pulling Force, Kg - Not Less Than 1300, Aggregated With Tractors - Belarus 82.1, 82.1-23/12, 826, 892, 92P, 920, 952; On Request - Belarus 1025, Ltz 60 , 6, Bucket Unloading Height (Bucket In The Horizon), Mm - Not Less Than 3600, Height To The Axis Of Rotation Of The Tool, Mm - Not Less Than 3850, Bucket Turning Angle Not More Than 67 Agree With The Customer
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
