Tenders Are Invited For Performing Laboratory Tests For The Task Titled Reconstruction Of Ul. Tomaszowska On The Section From The Intersection With Provincial Roads No. 707 And 728 To The Intersection With Ul. Góra In Nowe Miasto Nad Pilicą

1. Performing Laboratory Tests For The Task Titled Reconstruction Of Ul. Tomaszowska On The Section From The Intersection With Provincial Roads No. 707 And 728 To The Intersection With Ul. Góra In Nowe Miasto Nad Pilicą. Type Of Laboratory Tests 1. Tests Of Mineral-Asphalt Mixtures: 1.1 Testing Of The Composition Of The Mma Sample Taken Before Installation (Extraction) - 12 Pieces. 1.2 Testing Of The Compaction Index And Free Space Content Of The Mma Layer (Tests Should Include The Preparation Of Marshall Samples, Determining Their Bulk Density And Determining The Density Of The Loose Mineral-Asphalt Mixture In A Pycnometer) - 18 Pieces 1.3 Cutting Out The Sample (Core Drilling With A Road Drilling Rig With Surface Reconstruction) - 12 Pcs. 1.4 Determining The Thickness Of The Mma Layer - 18 Pcs. 2. Soil And Aggregate Tests: 2.1 Soil Compaction Test Using A Pressed Cylinder - 18 Pcs. 2.2 Load-Bearing Capacity And Compaction Tests Using A Vss Device - 5 Pcs. 2.3 Soil/Aggregate Suitability Test - 6 Pcs. 2.4 Load-Bearing Capacity And Compaction Index Measurement With A Dynamic Plate - 50 Pcs. 3. Concrete And Stabilization Tests: 3.1 Taking A Set Of Stabilization Samples With Storage And Compressive Strength Testing - 35 Pcs. 3.2 Taking A Set Of Structural Concrete Samples With Storage And Compressive Strength Testing - 30 Pcs. 4. Pavement Diagnostic Tests: 4.1 Testing The Longitudinal Evenness Of The Surface With A Planograph - 1 Piece 4.2 Testing The Longitudinal And Transverse Evenness Of The Iri Surface - 1 Piece 4.3 Testing The Reflectivity Of Horizontal Markings - 5 Pieces. Sanitary Industry1. Soil And Aggregate Tests: 1.1 Compaction Test Using A Dpl (Sd10)/Slvt Light Probe - 145 Pcs. 1.2 Load-Bearing Capacity And Compaction Tests Using A Vss Apparatus - 3 Pcs. 1.3 Soil/Aggregate Grain Size Analysis - 2 Pcs.2. The Indicated Number And Type Of Tests Are The Maximum Number, The Ordering Party Reserves The Right To Change The Number Of Ordered Tests Within Specific Types Of Tests. 3. The Final Value Of The Estimated Remuneration For The Subject Of The Contract Will Be Determined On The Basis Of The As-Built Cost Estimate Approved By The Ordering Party. The Remuneration Due To The Contractor For The Services Provided Will Be Determined As The Sum Of The Products Of The Unit Price And The Number Of Tests Performed And Received Under A Given Order.