Bids Are Invited For Acquisition Of Products For Use In Science And Robotics Workshops Of The Educamaker Project Approved By The Cmdca, With Resources From The Childhood And Adolescence Fund - Fia Through Fundraising Letter No. 01/2021 - Public Call Notice No. 02/201 8 Notice Of Cmdca Cancellation, According To The Terms Of Reference Attached.

Pla 3D Printing Filament 1.75Mm 1Kg - White Material: Pla Filament Thickness: 1.75Mm Thickness Tolerance: +/- 0.02Mm Color: White Quantity: 1 (One) Kg 100% Virgin Raw Material, No Added Recycled Density : 1.24 G/Cm3 Packaging On A Reel And Covered With Heat-Shrinkable Film To Protect Against Moisture Laboratory Maker-≫ Rapid Prototyping Used In A 3D Printer Pla Is The Technical Name For Polylactic Acid, Whose Origin Is The Polymerization Of Organic Fructose And Sucrose From Corn, Beetroot Or Sugar Cane. Pla Filament Is A Material Used For 3D Printing, Famous For Having Its Degradation Process Biologically Activated By Enzymatic Action Or/And Also By Hydrolysis And Photodegradation., Pla 3D Printing Filament 1.75Mm 1Kg - Green Material: Pla Filament Thickness: 1 , 02Mm Color: Green And If Not, It Could Be Black. Quantity: 1 (One) Kg 100% Virgin Raw Material, Pla 3D Printing Filament 1.75Mm 1Kg - Yellow Material: Pla Filament Thickness: 1.02Mm Color: Yellow And If Not Available, It Could Be Gray Quantity: 1 (One) Kg 100% Virgin Raw Material, Pla 3D Printing Filament 1.75Mm 1Kg - Red Material: Pla Filament Thickness: 1.02Mm Color: Red Quantity: 1 (One) Kg 100% Virgin Raw Material, Famous For Having Its Degradation Process Biologically Activated By Enzymatic Action Or/And Also By Hydrolysis And Photodegradation, Pla 3D Printing Filament 1.75Mm 1Kg - Blue Material: Pla Filament Thickness: 1.02Mm Color: Blue Quantity: 1 (One) Kg 100% Virgin Raw Material, 29/11 /2023, 5Mm Neodymium Magnet - Coating: Nickel; - Magnetization: Axial; - Max Temperature: 80° C; - Diameter: 5Mm; - Thickness: 2Mm; - Neodymiums Magnet; - Kit With 10 Units; - Super Strong - N35 Magnetic Grid; - Tablet Type Magnet., 5Mm Diffuse Yellow Led, 5Mm Diffused Blue Led- Supply Voltage: 3 To 3, 2V Dc;- Maximum Current: 20Ma;- Opening Angle: 120°- Led Diameter: 5Mm;- Length With Terminals: ~37Mm Specified; Material: Mdf; Color: Raw; Cutting Dimensions: 60Cm X 40Cm; Thickness: 3Mm., Product: Transparent Crystal Acrylic Plate Sheet 60Cm Cutting Dimensions: 60Cm X 40Cm; Thickness: 3Mm; Material: Crystal Acrylic With Abnt Nbr 7823-1 Standards; Transparency With A Minimum Of 92% Light Transmission., Monocular Biological Microscope 640 X, Test Tubes With Cap 20 Pla 1.75Mm 1Kg Pink, 3D Printing Filament Pla 1.75Mm 1Kg Dark Green, 3D Printing Filament Pla 1.75Mm 1Kg Purple, 3D Printing Filament Pla 1.75Mm 1Kg Light Blue, 3D Printing Filament Pla 1.75Mm 1Kg Silver, Memory Comb - 4Gb, Hd Ssd 250 Gb, Diy Mini Wi-Fi Smart Switch, Micro Servo 9G Mg90s, Dc Motor 3V-6V Dc130 22000Rpm, Arduino Uno R3, 5Mm White High Brightness Led, L298n H Bridge Motor Driver Module, L298n Dual H Bridge Motor Driver Module Stepper Or Dc - Operating Voltage: 4~35V;- Chip: St L298n;- Control Of 2 Dc Motors Or 1 Stepper Motor;- Maximum Operating Current: 2A Per Channel Or 4A Max;- Logic Voltage: 5V; - Logic Current: 0~36Ma;- Temperature Limits: -20 To +135°C;- Power