Tenders Are Invited For Reconstruction Of District Road No. 2314C Żnin - Janowiec Wlkp. From Km 6+000 To Km 8+300

The Subject Of The Order Is: Reconstruction Of The District Road No. 2314C Żnin - Janowiec Wlkp. From Km 6+000 To Km 8+300 Designed Status, Scope Of Works. Designed State The Investment Planned For Implementation Will Consist In The Reconstruction Of The District Road No. 2314C Żnin - Janowiec Wielkopolski From Km 6+000 To 8+300, Which Will Complement The Investment On The Road In Question In Connection With Its Modernization, Which Has Been Systematically Carried Out By The Żnin District For Several Years. The Stage In Question Is 2,300 Km Long And Covers The Towns Of Cerekwica And Uścikowo. The Main Subject Of The Investment Project Are: • Leveling And Appropriate Profiling Of The Existing Surface With Asphalt Concrete; • Construction Of A Bituminous Overlay On The Road; • Construction Of A New Surface Structure On Widenings; • Demolition Of Old And Construction Of New Barriers Roads;• Construction Of Roadsides Made Of Crushed Aggregate;• Reconstruction Of Existing Slopes Along The Road Along With Their Topsoil And Sowing With Grass Mixtures;• Construction Of Vertical And Horizontal Markings;• Renovation And Cleaning Of Culverts;Basic Technical Data: • Road Technical Class - Z;• Category Traffic - Kr3; • Built-Up And Undeveloped Areas;• Design Speed - 40 Km/H,• Length Of The Section Covered By The Order - 2,300 Km;• Width Of The Road Outside The Built-Up Area - 6M, Standard Widenings On Circular Curves; • Road Width In Built-Up Areas - 6.5 M, Standard Widening On Circular Curves; • Width Of The Traffic Lane - 3.0/3.25 M; • Road Cross-Section Limited By Resistors. The Route Of The Road In The Plan: • The Designed Section Mostly Runs In The Existing Track - Slight Corrections Were Made To The Horizontal Curves; • The Designed Structure For The Section In Question Envisages Milling The Existing Surface And Execution Of A Leveling, Binding And Wearing Course.• On The Entire Section Covered By The Reconstruction, The Road Should Be Framed With Concrete Retainers.• In Order To Ensure Accessibility To The Road, Exits To Fields With Bituminous Surface Were Designed. The Course Of The Road In A Longitudinal Profile: The Longitudinal Cross-Section Of The Existing Area Was Determined On The Basis Of A Map Provided By A Surveyor For Design Purposes At A Scale Of 1:500. The Following Factors Had A Significant Impact On The Design Of The Gradeline: • Adapting The Gradeline To The Existing Topography And The Designed Road Class; • The Need For The Gradeline To Match The Existing Condition At Side Road Junctions; • Efficient Road Drainage And Proper Water Drainage. Additional Information Regarding The Description Of The Subject Of The Order: • The Ordering Party Does Not Have Any Current Arrangements, Including The Opinion Of The Conservator. The Authority Issuing The Decision Amending The Decision To Implement A Road Investment, Ref. Ua.673.2.4.2014 Of August 29, 2014, Did Not Require Their Updating. If There Is Any Need To Obtain Additional Arrangements, Necessary Opinions With Institutions, Public Administration Bodies And Operators Of Underground And Above-Ground Networks, Or To Update Existing Arrangements Attached To The Design Documentation, It Will Be The Contractors Responsibility. • The Width Of The Mesh Laid Is 2X1.0M On Both Sides Of The Widening. • The Ordering Party Will Not Require The Installation Of Road Right Posts. • The Demolition Material, Apart From The Surface Cutter, Is The Property Of The Contractor. The Milling Cutter From Pavement Milling Should Be Delivered To The Storage Yard In Podgórzyn. • The Ordering Party Will Allow All Types Of Aggregates That Will Meet The Following Parameters: C90/3 Aggregate With Grain Size 0/31.5 Mm Thick. In Accordance With The Bill Of Quantities, Frost Resistance F1; Water Absorption Wa24 ≤2; Crushing Resistance Mde≤25.• The Roadsides Should Be Made In Accordance With The Design From Aggregate Owned By The Contractor.• The Sma Wearing Course Should Be Made Of Modified Asphalt. A Detailed Description Of The Subject Of The Order Is Included In The Design Documentation, Technical Specification For The Execution And Acceptance Of Construction Works And The Offer Cost Estimate, Which Are Available On The Side Of The Ongoing Proceedings Note The Design Documentation Attached To The Swz Includes The Original Design For The Entire Section And Updated Documentation. When Preparing The Offer, Please Analyze Only The Section From Km 6+000 To Km 8+300 Of The Study Entitled: Documentation Update. Pursuant To Art. 101 Section 4 Of The Public Procurement Law In The Event That The Technical Specifications For The Execution And Acceptance Of Works (Hereinafter Referred To As Stwiorb), The Design Documentation, I.E. The Document Describing The Subject Of The Contract, Includes A Reference To The Standards, Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law And Such References Were Not Accompanied By The Expression Or Equivalent, The Ordering Party Allows Solutions Equivalent To Those Described In Each Such Standard, Technical Assessment, Approval, Technical Specification, Technical Reference System. Due To The Above, It Should Be Assumed That Each Standard, Technical Assessment, Approval, Technical Specification, Technical Reference System Appearing In The Description Of The Subject Of The Contract Is Accompanied By The Words Or Equivalent. Pursuant To Art. 101 Section 5 Of The Public Procurement Law, A Contractor Who Refers To Solutions Equivalent To Those Described In These Documents Is Obliged To Prove, By Attaching To The Offer, Appropriate Means Of Evidence Referred To In Art. 104-107 Of The Public Procurement Law, That The Proposed Solutions Meet The Requirements Specified In The Description Of The Subject Of The Order To An Equivalent Extent. Conditions Of Settlement Of The Execution Of The Subject Of The Order. A) A Contract Will Be Concluded With The Selected Contractor For An Estimated Price Covering The Material Scope Specified In The Offer Cost Estimate And Technical Documentation; B) The Subject Of The Order Will Be Financed: From The Ordering Partys Own Funds With Co-Financing From The Government Road Development Fund Program. Attention!!! In The Event Of Not Receiving Co-Financing From The Government Road Development Fund, The Ordering Party Reserves The Right To Cancel The Procedure Pursuant To Art. 310 Pzp; C) The Basis For Determining The Remuneration (Gross Price Of The Offer) Will Be The Offer Cost Estimate Prepared On The Basis Of The Material Scope Specified In This Tor And In The Project Documentation; D) The Ordering Party Allows Only One Payment For Completely Completed Works That Are The Subject Of The Order; E) The Basis For Issuing The Final Invoice Will Be Preparation Of A Mutually Signed Acceptance Protocol, Which Will Show That The Subject Of The Contract Has Been Completed Completely And In Accordance With The Contract, Has No Defects And Can Be Used.