Bids Are Invited For Price Registration For Acquisition And Installation Of Equipment For Outdoor Gym For The Community Of Taquari Dos Ribeiros

Individual Ski Simulator Improves Cardiorespiratory And Cardiovascular Capacity, Balance And Motor Coordination. Manufactured With 2? Carbon Steel Tubes ½ X 2 Mm; 1? ½ X 3 Mm; 1? ½ X 1.50 Mm; 1? X 2.00Mm. Drawn Carbon Steel Tube 2? X 5.50 Mm Schedule 80 (60, 30X49, 22). 30 Mm X 50 Mm X 2 Mm Metal, 4.75 Mm Carbon Steel Plate For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. 3/16 Flat Bar? X 1 ¼?. Uses Solid Shafts, All Double Bearings, Phosphate-Based Surface Treatment; Colorful Thermo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops 53Mm X 30M, Mig Welding, 3/8? X 2? ½, Zinc Plated Screws And Fastening Nuts; 2? Injected Plastic Cap ½. Injected And/Or Rubberized Plastic Finishes. Allows The Use Of 1 (One) User And Offers Total Security. Installation In Closed Or Outdoor Areas, Resistant To Weather Actions. Fixing The Device To The Ground Using A Parabolt Anchor. High Fixation Adhesive With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. ? Approximate Measurements: Height: 1544 Mm Front: 512 Mm Side: 1250 Mm Area: 8, 17 M² Weight: 36 Kg, Walking Simulator Increases Lower Limb Mobility And Develops Motor Coordination. Ability For A User To Perform The Exercise. Manufactured With 2? Carbon Steel Tubes ½ X 2 Mm; Two? X 2Mm; 1? ½ X 1.50 Mm. 4.75 Carbon Steel Plates For The Equipment Attachment Point And 1.9 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.98 Mm). Use Solid Shafts, Double Bearings, Phosphate-Based Surface Treatment; Colorful Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, 3/8 Parabolts Anchor? X 2 ½?, Zinc Plated Screws; Injected And/Or Rubberized Plastic Finishes. High Fixation Adhesive With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. ? Approximate Measurements: Height: 1160 Mm Front: 802 Mm Side: 840 Mm Area: 7. 96 M² Weight: 38 Kg, Double Leg Pressure Made With 4? X 3Mm; 3? ½X3.75; Two? X 2Mm; Two? X 3Mm; 4.75 Mm Carbon Steel Sheets To Reinforce The Equipment Structure And 2 Mm For The Bench And Back With Dimensions Of 335 Mm X 315 Mm And Printed With Rounded Edges. Drawn Carbon Steel Tube 2? X 5.30 Mm X 49.22 Mm). Solid Shafts, Round Flexible Rubber Stops (53Mm X 30Mm) Are Used. Anchor With 230 Mm X 3/16? Flange, Laser Cut With 5/8? Zinc Plated Fixing Screws. X 1 ¼? And 5/8? Zinc Plated Washer, 3/8? Solid Drawn Shafts, Zinc Plated Screws, Washers And Fastening Nuts; Built-In Buffer 2?, In 3? ½?, Injected And/Or Rubberized Plastic Finishes. High Fixation Adhesive With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. ? Approximate Measurements: Height: 1540 Mm Front: 322 Mm Side: 1970 Mm Area: 9. 22 M² Weight: 46 Kg, Vertical Rotation With Double Diagonal Made With 3?½X2mm Carbon Steel Tubes; 2?X2mm; 1?X1, 50 Mm; ¾X 1.20Mm. Din Round Drawn Tube (55Mmx44mm). Carbon Steel Sheets; 3Mm For Structural Reinforcement. Uses Solid Shafts, Anchor With 230Mmx3/16? Flange, Laser Cut With 5/8?X1¼? Zinc Plated Fastening Screws And Air