Bids Are Invited For Acquisition Of Mobile Goods And Consumption - Funpen Federal

Footrest With Height And Tilt Adjustment. High Impact Abs Plate/Support Plate. Steel Structure In Black Color. Non-Slip Rubber Plate. 5 Stages In Height (Minimum Height: 13Cm / Maximum Height: 17Cm In Height). Non-Slip Shoes. Unit., Electric Drinking Fountain, For Bottle Of Mineral Water Of 20 (Twenty) Liters, Column Type, Minimum Capacity For Storage In The Reservoir Of 2.0 Liters, Cabinet Made Of Galvanized Sheet Metal And Painted With Epoxy-Based Powder Paint. Made Of High-Resistance Plastic, With 02 (Two) Easy-To-Use Taps (Cold And Natural Water) Made Of High-Resistance Plastic, Copper Piping External To The Reservoir, Reservoir And Ducts Made Of 100% Non-Toxic Materials, High-Performance Silent Compressor And Consumption Not Exceeding 195 Watts/H, Do Not Use Cfc Gas As A Refrigeration Element; Voltage 110/220 Volts; Cabinet Dimensions: Minimum Height Of 900Mm And Maximum Height Of 1,000Mm; Minimum Width Of 300Mm And Maximum Of 350Mm; Minimum Depth Of 270Mm And Maximum Depth Of 350Mm. It Must Be Accompanied By The Respective Bottle (Empty). Technical Manual In Portuguese; With Inmetro Seal. Minimum Warranty Of 01 (One) Year. Unit., Binoculars – Rubberized Body With 03 Layers. Structure Coated With 7 Layers Of Protection, Diopter Correction Right Side Adjusted And Collimated With Laser Equipment, Construction, With Minimum Range Of 39 Km, Uv Lens Coating. Unit., Oval Meeting Table (L=2000 Mm, D=1100 Mm, H=740 Mm), With The Following Minimum Features: One-Piece Top, With Oval Shape, Made With Medium Density Wood Particle Boards Particleboard - Mdp), Selected From Reforested Eucalyptus And Pine, Bonded And Consolidated With Synthetic Resin And Thermo-Stabilized Under Pressure, 25 Mm Thick, Coated On Both Sides With Thermo-Pressed Melamine Film 0.2 Mm Thick , Textured, Semi-Matte, And Anti-Glare. The Sheets Must Have A Minimum Density Of 565 Kgf/M³, Perpendicular Tensile Strength Kgf/Cm² = 3.1, Static Flexural Strength Kgf/Cm² = 143, Surface Tensile Strength Kgf/Cm² = 10.2 According To Standards Nbr 14810-1 Terminology, Nbr 14810-2 - Requirements And Nbr 14810-3 Test Methods. The Edge That Follows The Entire Contour Of The Top Is Topped With Polystyrene Tape With A Minimum Thickness Of 2.5 Mm, Glued With Hot Melt Adhesive, With Rounded Edges And An Ergonomic Radius Of 2.5 Mm In Accordance With Abnt Standards. The Fixing Of The Top/Structure Must Be Done Using M6 Machine Screws, Fixed Using Metal Bushings Made Of Zamak Embedded In The Lower Face Of The Top. Double And Parallel Frontal Panels, One In Each Vertical Column Of The Structure, Structural And Privacy, Made With Medium Density Wood Particle Board (Mdp), 18 Mm Thick, Semi-Matte And Anti-Reflective. The Sheets Have A Minimum Density Of 575 Kgf/M³, 6, Resistance To Static Bending Kgf/Cm² = 163, 2 In Accordance With Standards Nbr 14810-1 - Terminology, Nbr 14810-2 - Requirements And Nbr 14810-3 - Methods Of Rehearsal. The Board That Accompanies The Entire Table And Chair Sets - With 4 Chairs, In Different Colors, Made Of Rigid Plastic, Square-Shaped Table.