This Is A Complete Repair Of The Culvert, Where The Supporting Structure Of The Existing Culvert Consists Of A Reinforced Concrete Slab With A Thickness Of Approx. 350 Mm. The Existing Supporting Structure Will Be Replaced By A New Supporting Structure, Which Will Consist Of A Flexible Mouth Pipe With Spirally Wound Sheet Metal, With A Width Of 1.892 M And A Clear Height Of 1.55 M. Sheet Thickness Is 2.5 Mm And Pko Continuously Forms Hot-Dip Zinc Sheets With A Polymer Coating. The Length Of The Oven Is 5.68 M. In The Flow Profile Of The Tubosider, A Kineta Will Be Made Of A Stone Foundation. During The Repair, The Flow Profile Will Be Increased From The Existing 1.39 M2 To 1.66 M2, I.E. An Increase Of Approx. 19%. A New Bituminous Cover Will Be Made On The Local Road With A Total Length Of 24 M. On The Concrete Front Walls With Stone Cladding Of Thickness 150 Mm, A Reinforced Concrete Cornice With A Width Of 0.6 M Will Be Installed, To Which A Wooden Railing With Cross Filling Will Be Additionally Anchored. Adjacent Stone Regulatory Walls Will Be Bricked Up. The Bottom Of The Stream Bed At The Inlet And Outlet Will Be Paved With Stone Paving In Concrete (Granite) And Will Be Finished With Concrete Thresholds.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
