Centrifugal Single-Stage Single-Stage Electric Pump Manufactured According To Din 24255 - Nfe44-Ii - Uni 7467 Standards. The Pump And Engine Are Connected Through An Intermediate Flange. This Pump Is Ideal For Pumping Clean Water And Other Chemically And Mechanically Non-Aggressive Liquids. If It Is Supposed To Pump A Liquid, The Density And/Or Viscosity Of Which Differs From The Same Parameters Of Water, Then Due To The Change In Hydraulic Power, It Is Necessary To Take Into Account The Power Of The Electric Motor Required In This Case. Diameter Dn, Mm: 50 Head H, M, Max: 37 Consumption Q, M /H, Max: 78 Head H, M, Nominal: 28.5 Flow Rate Q, M /H, Nominal: 60 Powers Power P, Kw, Max: 5.5 Restrictions Operating Temperature T, C: To 90 Administration Type Of Electric Motor Control: 1-Speed Electric Voltage U, V, Nom: 3~380 Degree Of Protection: Ip55 Materials, Colors And Weight Weight, Kg: 74.8. Pump Body: Cast Iron. Impeller: Cast Iron. Shaft: Stainless Steel (Aisi304). Shaft Seal: Ceramic/Graphite/Nbr. Connections And Dimensions Connection Type: Flanged. Connection Of Suction Pipe Dn, Mm Or G, Inches: 65. Connecting A Pressure Pipe Dn, Mm Or G, Inches: 50. The Product Must Be Agreed With The Customer In Advance
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
