Bids Are Invited For Parts For The Two New Bump Sets That Will Replace The Two Old Motorcycle Bomb Ensembles, Which Are Part Of The Water Supply System, Called The Saae-Atibaia Environmental Sanitation Municipal Authority.
Bids Are Invited For Parts For The Two New Bump Sets That Will Replace The Two Old Motorcycle Bomb Ensembles, Which Are Part Of The Water Supply System, Called The Saae-Atibaia Environmental Sanitation Municipal Authority.
Lot 1 - Long Weldable Flange Collar Electrofusion High Density Polyethylene With The Following Characteristics: 1) Material: Made With Type Pe 100 Resin; 2) From: 90Mm; 3) Pressure Class: Pn 16; 4)Standard Dimension Ratio: Sdr 11; 5) Manufacturing: According To Nbr 15,593; 6) Note 1: Reinforced Plastic Packaging And A Label With Identification, Code And Description Must Be Provided. 7) Note 2: Minimade Warranty 12 (Twelve) Months For Manufacturing Defect., Lot 1 - Electrofusion High Density Polyethylene Weldable Running Glove With The Following Characteristics: 1) Material: Made With Type Pe 100 Resin; 2) From: 90Mm; 3) Pressure Class: Pn 16; 4) Standard Dimensionratio: Sdr 11; 5) Manufacturing: According To Nbr 15,593; 6) Note 1: Must Be Supplied In Reinforced Plastic Packaging And Label With Identification, Code And Description. 7) Note 2: Minimum Warranty Of 12 (Twelve) Months For Manufacturing Defect., Lot 1 - Flange Without Carbon Steel Ledge = 90 Mm Nbr 7675 Pn 10 For Hdpe Collar, With Accessories., Lot 1 - Hdpe Reduction In Electrofusion 110 Lot 4 - Butterfly Valve With Flanges Pn 16 Cast Iron Dn=75 Mm L=0.2 M Biexcentric/Eccentric Type, Manually Operated By Handwheel, Epoxy Polyamide Painting Awwa C504 Water, Lot 5 - Wafer Check Valve Pn 16 Cast Iron Dn=80 Mm Close. Rapido Axial, Obt., Polyurethane, Painting Epoxinbr 7675 Water, Lot 6 - Pipe With Flanges Pn 16 Cast Iron Dn=80 Mm L=1,600 Mm, Accessories Included Nbr7675 Water, Lot 7 - Stump With Flanges Pn 16 Cast Iron Dn=80 Mm L=250 Mm, Bituminous Painting Accessories Included Nbr 7675Water, Lot 8 - 90 Curve Cast Iron Dn 80Mm, With Flange On Derivation, Pn 16, (According To Nbr 6916 And Nbr 7675). The Projection Of The Flanges Must Present Machined Surfaces, With A Uniform Finish And 03 Grooves (Striations), In The Shape Of A Circle, Equidistant From Each Other, With A Depth Of 01 Mm. Coating Internally And Externally With Bituminous Paint. They Must Be Cast, In High Relief, On Their External Surface: The Name Or Brand Of The Manufacturer, The Year Of Manufacture And The Corresponding Id. Materials With A Maximum Of 2 Years Of Manufacture Will Be Accepted, That Is, From The Current Or Immediately Previous Year. They Must Be Accompanied By Accessories: Washers, Screws And Hexagonal Nuts In Accordance With Astm A153 Class C., Lot 9 - Cast Iron Axially Locked Disassembly Joint Dn= 80 Mm Pn16, Lot 10 - Pre-Dosed Cementitious Grease With Fluid Consistency And High Resistance For Repairs Structural And Anchorages (Free Of Chlorides And Metallic Components)25 Kg
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
