Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Furniture, Electronics, Household Appliances, Small Appliances And Other Equipment To Meet The Needs Of The Municipal Health Department Of Luís Eduardo MagalhãesBa.

Tall Closed Cabinet With 02 Doors And 03 Shelves. Wooden. Measurements: 90X50x160 Cm, With The Following Specifications: Top: Made Of 25 Mm Mdf Wood Covered With Bp Textured Melamine Film On Both Sides, Depth 50 Cm, Finished With 2 Mm Thick Pvc Edge Tape On All Ends . Color: Gray, Low Closed Cabinet With 2 Doors. Cabinet In Mdp Wood Fiber With Melamine Coating (Bp) 15Mm, Eucaplac Bottom 3Mm, Pvc Edges. Size Description: 75 Low Cabinet Two Doors. Specifications: Cabinet Made Of 25Mm Mdp, Edge Banding With 1Mm On The Tops And The Rest, 45Mm On The Rest, With A Bp Finish, Highly Resistant To Wear And Scratches. Metallic Hinges And Chrome Handles. Centralized Shelf. Dimensions: Lpa 80Cmx38cmx77cm. Weight 23.3Kg. With Lock. Color: Gray, Flying Drawer 04 Drawers. Measurements: 46X50x69 Cm: Top: (For Flying Drawers/File). Made From 25 Mm Thick Mdf Wood Covered With Bp Textured Melamine Film On Both Sides, Front And Back Edges With 3 Mm Thick Pvc Tape Finish, Hot Glued Using The Hot-Melt System And 2.5 Mm Radius Throughout Its Perimeter. Transverse Edges Finished In 2Mm Thick Pvc Tape, Hot-Glued Using The Hot-Melt System Around Its Entire Perimeter. Color: Grey., Straight Table. Dimensions: 1200 X 600 X 740 Mm (Wxdxh). (Maximum Variation Of 5% In Measurements For More Or Less). Top Made Of Mdf With A Minimum Thickness Of 25 Mm, Covered In Textured Low-Pressure Melamine Laminate On Both Sides, Front And Back Edges With A Finish In Pvc Tape With A Minimum Thickness Of 3 Mm, Hot Glued Using The Holt System. Melt Throughout Its Perimeter, With A Minimum Radius Of 2.5 Mm. Transverse Edges Finished In Pvc Tape Of At Least 2 Mm Thick, Hot Glued Using The Holt-Melt System Around Its Entire Perimeter. Equipped With 2 Cable Glands With A Minimum Diameter Of 60 Mm In High-Impact Injected Polystyrene. Front Panel In Mdf Wood, At Least 18Mm Thick, Covered In Textured Low-Pressure Melamine Laminate On Both Sides. Edges Finished In Pvc Tape Of At Least 1 Mm Thick, Hot Glued Using The Holt-Melt System, Around Its Entire Perimeter. Front Panel Attached To The Side Structures Of The Table Via Steel Replacing Rivets And Steel Screws And Metal Bushings. Two Structural Rails For Wiring Passage Under The Top, Allowing Access To All Power, Logical And Telephone Cabling, Made Of #16 Thick Steel Sheet, Must Contain 02 (Two) Supports, At Minimum, For Steel Sheet Sockets With A Minimum Thickness Of 1.5Mm, Measuring 99X17mm, And Holes For Installing Sockets, Fixed To The Gutter Using Screws. Two Side Feet In Steel, Each Foot Composed Of: Two Vertical Columns In Steel Plate #18 Measuring 668, 5X62x40, R20 On The External Part Of The Column. One Lower Leg Stamped In #16 Steel Sheet Measuring 580X73x25 Mm With Support For Leveling Shoes With M8 Thread. Between The Vertical Columns There Must Be Two Removable Covers Made Of Steel Plate #20, Measuring 635X118x20mm. Both Removable Covers Must Provide A Passage At The Bottom And Top For Climbing And Dropping Cables. Color: Grey., Meeting Table For 10 Seats. Measurements (Hxwxd): 75X270x112 (Cm) Top Made Of D Fiber Plates