Tenders Are Invited For Skip Loaders - Purchase And Delivery Of A Brand New Articulated Loader For The Needs Of The Waste Management Plant In Korczów In Connection With The Modernization, Expansion And Reconstruction Of The Zzo In Korczów, Which Is Ipok

Skip Loaders - Purchase And Delivery Of A Brand New Articulated Loader For The Needs Of The Waste Management Plant In Korczów In Connection With The Modernization, Expansion And Reconstruction Of The Zzo In Korczów, Which Is Ipok. Purchase And Delivery Of A Brand New Articulated Loader For The Development Plant Waste In Korczów With The Following Parameters: General Parameters Of The Wheel Loader: 1. Year Of Production – 2023, 2. Operating Weight – Ranging From 19,000 To 24,500 Kg, 3. Brand New Charger, Engine 4. Engine With Power Ranging From 170 Kw To 205 Kw With A Capacity Ranging From 6 Dm3 To 7 Dm3 5. Maximum Torque - Minimum 1100 Nm, 6. Number Of Cylinders – Min. 6, 7. Diesel Engine Meeting Exhaust Emission Standards Stage V, Without Egr Valve 8. System That Facilitates Starting The Charger In Cold Periods Temperatures. 9. Automatic Reduction/Increase Of Engine Idle Speed 10. Automatic Radiator Return Fan Gearbox 11. Hydrokinetic Or Hydrostatic Transmission 12. Automatic Gearbox With The Ability To Change Gears Under Load 13. W In The Case Of A Loader With A 4-Speed Gearbox, An Intelligent Shutdown System Is Required Clutch, In The Case Of A 5-Speed Gearbox - Torque Converter Lock. System Braking, Hydraulic And Steering 14. Multi-Disc, Oil-Based Braking System Both Axles Are Hydraulically Actuated 15. Hydraulic System With A Capacity Of Min. 240 L/Min, 220 Bar, 16. Opening And Closing The Bucket Using Two Actuators 17. Control Of Attachments And Driving Direction With One Joystick 18. Articulated Frame 19. Additional Hydraulic Function In The Joystick To Operate The Bucket With Pressure 20. Hopper Fuel With A Capacity Of Min. 280 Dm3 21. Ad-Blue Fluid Tank Min. 40 Dm3 Chassis, Cabin 22. The Front Drive Axle Is Rigid, The Rear Drive Axle Is Oscillating, Additionally Reinforced Axles Enable Installation Of Solid Tires 23. Front Axle With 100% Engaged Differential Lock Automatically, Rear Axle Without Differential Lock (Axles Are Not Allowed Limited Slip Lsd), 24. Wheelbase – 3200 – 3450 Mm 25. Ground Clearance Under The Machine – Min. 0.40 M 26. Height From The Ground To The Highest Point Of The Cabin – Maximum – 3.80 M 27. Closed Cabin Meeting Current Rops Requirements - Fops With Heating And Air Conditioning, Rear Window Heating, Front And Rear Window Wipers 28. Suspended Operators Seat, Integrated With Armrests And Control Joystick Loader Arm, Equipped With Seat Belts. 29. Sound Pressure Level At The Operators Station Maximum - 68Db 30. Min. 2 External Rear-View Mirrors And At Least 1 Interior Rear-View Mirror 31. Additional Cabin Carbon Filter 32. Lever Controlling The Boom And Changing The Direction Of Travel. Bucket 33. The So-Called Bucket. Tall Discharge With A Capacity Ranging From 3.50 M3 To 4.20 M3 With A Double-Sided, Divided Slat Made Of Hb500 Steel Adapted To Work With Material With A Density Of Up To 1200 Kg/M3 34. Height Full Discharge At An Angle Of 45˚ – Min. 4.60 M Enabling Loading Of Built-In Cars Type Of So-Called Moving Floor 35. Dump Height To Bucket Rotation Pin Min. 4.10 M 36. Steel Cover For The Piston Rod Of The Bucket Tilt Cylinder 37. Equipped With An Additional Weighing System For The Loaded Material With A Display Installed In The Cabin With The Possibility Of Printing 38. Automatic Bucket Positioning And Amortization System 39. Working System Of The Z-Bar Boom Additional Information 40. Non-Progressive Or Progressive Automatic Central Lubrication System Using Solid Grease 41. Reversing Camera And Reversing Sound Signal, 42. At Least 2 Buttons (Shortcuts) Most Frequently Used Functions Located Next To The Joystick, Integrated With The Loader Monitor 43. Lights Work Leds Located Below The Roof Line At The Front (4 Pcs.) And Rear Of The Cabin (2 Pcs.) And The So-Called Warning Light Rooster, 44. Metal Covers For Work Lights Front And Rear 45. Gearbox Cover - Lower And Side, 46. Factory System Remote Monitoring (Telemetry, On-Line With Gps Location) Including, For Example, Operating Time, Efficiency, Real Fuel Consumption, With Subscription For At Least 3 Years 47. Pneumatic Tires Class L5. Note: The Manufacturer Must Take Into Account The Possible Installation Of Solid Tires Within The Scope Any Subsequent Complaints Or Warranty Repairs. Use Of Solid Tires Cannot Exclude Any Components Of The Charger From Its Warranty. 48. Equipped With Factory Towing Hitch 49. Training: At Least 2 People Indicated By The Ordering Party In The Amount Of At Least 4 Hours For Each Person - Confirmed By A Document Representative Of The Exhibitor For Each Trained Person. The Charger Will Be Delivered By The Contractor And At His Expense To The Waste Management Plant In Korczów Near Biłgoraj (Costs Related To The Execution Of The Order - Loading, Delivery, Unloading, Should Be Included In The Offer Price). The Charger In Question Should Be A Device Brand New (Unused) Year Of Production: 2023. It Should Have The Requirements Required By Law Documents And A Document Specifying The Terms Of Warranty And Post-Warranty Service, Instructions Service (All Documents Prepared In Polish). All Documents Regarding The Contractor Will Hand Over The Device To The Ordering Party On The Day The Device Is Delivered For Acceptance. Required Warranty Period - Minimum 36 Months Or 4,000 Hours, Depending On What Happens Previously Counted From The Date Of Protocol Receipt Of The Delivered Device. The Contractor Will Provide An Authorized Mobile Service For The Delivered Devices With Access To The Ordering Party. The Service Will Be Carried Out In Accordance With The General Warranty Conditions. In The Case Of Reported Failure During The Warranty Period, Costs Of Travel To The Ordering Party And Possible Transport Vehicle For Service Is Covered By The Contractor. Costs Of Periodic Required Inspections Included With All Consumables Specified For Replacement In The Warranty Card For A Given Inspection During The Warranty Period Is Covered By The Contractor.