Tenders Are Invited For Reconstruction Of Municipal Road No. 104016 R Ul. 3 Maja In Kolbuszowa

Investment Task Entitled: Reconstruction Of Municipal Road No. 104016 R Ul. 3 Maja In Kolbuszowa” As Part Of The Task Entitled: Reconstruction Of Municipal Road No. 104016 R Ul. 3 Maja In Kolbuszowa Along With The Necessary Infrastructure And Construction Equipment. It Is Co-Financed By The Government Fund Polish Order: Strategic Investment Program. No. Edition 8/2023/3904/Polskilad. Investment Implementation Based On: Notification Of Construction Works Of January 26, 2023. Investment Location: Plots Of Land Registry No.: 1274/2, 1413/2, 1885/4 Located In Kolbuszowa , Kolbuszowa Commune, Kolbuszów Poviat, Podkarpackie Voivodeship. The Scope Of Construction Works Includes: 1. Road Industry1). Preparatory And Demolition Works.2). Reconstruction Of The Existing Road Surface Of Ul. 3-Go Maja - Construction Of A New Road Surface Of Asphalt Concrete, Approx. 352 M Long And 7.0 M Wide, Along With The Substructure Structure: A) Wearing Course: Ac 11 S Asphalt Concrete - Thick. 4 Cm, B) Binding Layer: Ac 16 W Asphalt Concrete – Thick. 5 Cm, C) Basic Foundation Made Of Crushed Aggregate Fraction 0-31.5 Mm - Thickness. 8 Cm, D) Making The Foundation From A Mineral-Cement-Emulsion Mixture (Mce) - Using The Deep Cold Recycling Method, Thickness. Layers After Compaction 18 Cm, E) Milling Of The Existing Bituminous Surface With A Diameter Of Thick 4 Cm3). Reconstruction Of Sidewalksa) Left Side, 2.0 M Wide, With A Surface Made Of Concrete Paving Stones (Sidewalk Next To The Road), B) Right Side, 1.5 M Wide, With A Surface Made Of Concrete Paving Stones (Sidewalk Moved Away From The Road).4). Construction Of A Section Of Storm Sewage System With A Diameter Of Dn 300 Mm Made Of Pvc Pipes (Sn8) With A Length Of Approx. 60 M, Including The Installation Of 2 Pcs. Of Concrete Inspection Wells With A Diameter Of 1200 Mm And 4 Pcs. Of Sewage Wells With A Diameter Of 500 Mm (Street Inlets).5 ). Replacement Of 8 Sewage Wells With A Diameter Of 500 Mm (Street Inlets) Along With Drains Dn 200 Mm Made Of Pvc Pipes And Connection To The Existing Storm Sewage System.6). Reconstruction And Construction Of Regular Exits.7). Construction Of Parking Spaces.8). Construction Of A Technological Channel Made Of Hdpe Dn 110 Pipes, Approx. 394 M Long, Including Installation Of 12 Skr-1.9 Cable Chambers. Protection Of The Existing Telecommunications Network With Two-Part Protective Pipes With A Diameter Of Dn 110 Mm And Peripheral Stiffness Sn = 5 Kn/M2.10). Installation Of Vertical And Horizontal Road Markings.11). Demolition Of The Existing Inactive Combined Sewer With A Diameter Of 80 Cm Made Of Concrete Pipes (Located In The Road At Km Approx. 0+250 To 0+357, Side P. 12). Finishing Works.2. Reconstruction Of The Low And Medium Pressure Gas Network1). Reconstruction Of The Existing Gas Network A) In Section 1-2 (Low Pressure), The Existing Dn100 Steel Pipes Should Be Rebuilt Into Pe 100 Sdr17.6 Dn110 Pipes With A Length Of 15.0 M And A Pe 100 Sdr17.6 Dn 160 Casing Pipe With A Length Of 10 M Should Be Used, 0M.B) In Section 3-4 (Medium Pressure), The Existing Dn40 Steel Pipes Should Be Rebuilt Into Pe 100 Sdr11 Dn63 Pipes With A Length Of 10.0 M And A Pe 100 Sdr17.6 Dn 110 Protective Pipe With A Length Of 8.5 M Should Be Used.C) The Works Should Be Performed In Accordance With: [1] Wt No.: Psgja.Zmsm.763A.093.114644.1.22 Of June 14, 2022 And The Annex To The Wt Of February 10, 2023 [2] Agreed Technical Documentation - Agreement Number: Psgja.Zmsm.764.051.1.23 Of February 13, 20233. Reconstruction Of The Water Supply Network1). Reconstruction Of The Existing Water Supply Networka) In Section 1-2, The Existing Ø160 Pvc Pipes Should Be Converted Into Pe 100 Sdr 17 Dn 150 Pipes With A Length Of 12.0 M And A Pe 100 Sdr17 Dn 250 Protective Pipe With A Length Of 10.5 M Should Be Used.B) In Section 1- 2, Install A Cut-Off (Network) Gate Valve Dn150.C) On Section 1*-3, Use Pe100 Sdr 17 Dn 80 Pipes And Connect The Existing Hydrant.D) On Section 1*-3, Install A Cutoff (Hydrant) Gate Valve Dn 80.E) The Works Should Be Performed In Accordance With: [1] Wt No.: Wk/S350-128/05/22 Of May 30, 2022 Issued By Zgkim Kolbuszowa Sp. Z O. O. 4. Reconstruction Of Street Lighting With Security Of The Existing Power Infrastructure1). Disassembly Of Existing Sodium Luminaires (11 Pcs.) And Replacement With Led Luminaires With Nema Sockets And Lighting Controllers, Adapted To Control A Digital Dali Or Analog 0-10 V.2 Signal. Relocation Of Existing Lighting Poles (3 Pcs.).3). Relocation (Correction Of The Lv Cable Route) On The A-B-C-D, E-F And G-H Sections (Approx. 239 M) - Dig Out The Existing Cable And Move It Beyond The Collision Site In Accordance With Pzt.4). Installation Of Two-Part Protective (Shielding) Pipes With A Diameter Of Dn 110 Mm (Blue) On A Length Of Approx. 165.0 M With Peripheral Stiffness Sn = 5 Kn/M2 On Existing Power Networks.5). The Works Should Be Performed In Accordance With: A) Wt No.: L.Dz.Re02/Rm/Pś/2022/5/535/W Of June 17, 2022 Issued By Pge Dystrybucja S.A.B) Wt No.: Rgkdit.7011.18.1.2022.Md Of June 1, 2022 Issued By The Kolbuszowa Commune. Detailed Conditions For Led Lighting Fixtures And The Control System. The Offered Lighting Control And Management System For Each Luminaire Must Be Integrated With The Planet Or Smartly City System Already Installed In The Kolbuszowa Commune. The System Should Be Taqlv2 Certified To Ensure Interoperability. The System Must Have Functionality At Least To The Extent That Is Already Installed And Operated By The Ordering Party. As Part Of The Delivery, The Ordering Party Expects The Delivery Of System Controllers Built Into Each Offered Fixture In The System - The Fixture Is Equipped With A Nema 5/7 Pin Socket, System Controller And Current Jumper, Equipped With A Plug Suitable For Installation In This Socket. The Controllers Must Be Universal - Ensuring Control Of Both The Digital Dali Signal And The Analog 0-10V Signal. Key Parameters Of The System Controller: Supply Voltage 230V, Impact Resistance Ik Minimum 06, Ip Tightness Level Minimum 66, Minimum Operating Temperature Range -40C To +50C, Radio Communication In The Unlicensed Frequency Of 868Mhz (In Accordance With The En 300 220 Standard) For Already Built-In The Ordering Partys Base Stations In The Kolbuszowa Commune. Led Luminaires - Minimum Parameters: A) Housing Made Of Die-Cast Aluminum, The Upper Part Of The Body Is Made Of One Element, Free Of Joints, Hinges And Ribs. B) Powder-Coated Body With Electrostatic Coating Enabling Spontaneous Removal Of Dirt From The Housing C) Two-Chamber Housing, Separate Chamber Enabling Connection Of The Power Supply And Control System Elements.D) The Luminaire Is Made In Class Ii Anti-Shock Protection.E) The Luminaire Is Equipped With A System That Regulates The Pressure In The Luminaire, Preventing Moisture Condensation Inside The Luminaire.F) The Luminaire And Accessories Chamber Is Ip 66 Tight.G) Resistance To Impacts - Ik 07.H) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K.I) Luminaire Power Supply System Enabling Control Of A Dali Digital Signal Or An Analog 0-10 V Signal.J) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Luminous Flux All Led Sources At The Same Time And Not By Turning Off Individual Led Panels In One Luminaire. K) Luminous Efficiency Of The Luminaire (Taking Into Account All Losses) Min. 170 Lm/W.L) Power Factor (Cos Φ)≥0.98 For Rated Power, Maintaining Power Factor (Cos Φ) Above 0.95 When Controlling The Luminaire In The Range Of 0-100% Of Rated Power.M) Resistance Of The Luminaire To Overvoltages: 10 Kv.N) The Fixtures Hook Should Be An Integral Part Of The Fixture And Be Able To Be Mounted On A Boom Or Directly On Lighting Poles. The Hook Should Be Able To Adjust The Inclination Angle 0-15⁰ And -15-0⁰. O) Lamp Luminous Flux – Min. 10,200 Lm.P) Luminaire Equipped With A Nema 5/7Pin Socket.Q) Warranty Min. 7 Years (84 Months) From The Date Of Acceptance Of The Works. The Detailed Scope Of Works Is Specified In: Application Materials, Executive Designs And Detailed Technical Specifications. Bills Of Quantities Are Of An Auxiliary Nature. Note: If The Swz Or Attachments To The Swz, Including Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, Would Indicate Trademarks, Origins, Technical Approval Standards, Patents In Relation To Certain Materials And Devices, The Ordering Party, In Accordance With Art. 99(5) Of The Public Procurement Act Allows The Submission Of Equivalent Products. All Products From Specific Manufacturers Specify The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only A Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. Therefore, The Use Of Manufacturer/Product Names Is For Example Purposes Only. When Describing The Subject Of The Order, The Ordering Party, Indicating The Name Of A Specific Manufacturer (Supplier) Or A Specific Product, Also Allows Equivalent Products With Quality And Performance Parameters. Equivalent Materials Must Be Mentioned By Name In The Offer, And The Burden Of Proving That The Parameters Required By The Ordering Party Are Met Rests With The Person Submitting The Offer. The Implementation Of The Subject Of The Order Must Be Consistent With The Offer And Swz, In Particular With: A) Description Of The Subject Of The Order / Technical Documentation (Chapter Iii), B) Important Provisions Of The Contract (Chapter Iv), C) Bills Of Quantities (Chapter Ii) - The Bill Of Quantities Is Auxiliary.