Bids Are Invited For Acquisition Of Systems And Equipment For The Gavbm, Including A Supply System, Motor Pump Set, Helitransportable Reservoir, Etc., With The Aim Of Improving The Effectiveness And Safety Of Gavbm Operations.
Bids Are Invited For Acquisition Of Systems And Equipment For The Gavbm, Including A Supply System, Motor Pump Set, Helitransportable Reservoir, Etc., With The Aim Of Improving The Effectiveness And Safety Of Gavbm Operations.
Single Point Supply System For Air Tractor 802F Type Aircraft Approved By Anac, Consisting Of Connectors, Valves, Pipes, External And Internal Control Centers And Fueling Point Box, With Coupling For The Supply Hose That Allows The Fueler To Remain With The Free Hands. The System Allows The Aircraft Commander To Control The Supply Inside The Aircraft. Must Enable Partial Filling Of Fuel Tanks With A Minimum Fuel Warning Circuit. Must Allow Pressure Switches To Prevent Overpressure Of Fuel Tanks During Refueling. Automatic Shutdown. It Must Have A Sealed Box, Preventing Contamination Of The Dry Break Supply When Not In Operation. Dual Control And Indicators For Pilot And Ground Crew. It Must Contain Led Indicators That Allow The Open Valves And System Power To Be Shown. It Must Enable Practical Adaptation To Fuel Systems Of 1 To 2 Units., Portable External Source With Batteries, 110V/220V Two-Phase Input, 28Vdc Output, 2400A Peak Current And Maximum Weight Of 21 Kg And Maximum Charging Of 4H . Must Come With Original Protection In Red Color And Cable For Aircraft Of 2.1 Meters Or Larger And Charging Cable American And European Model With Adaptation For 3-Pin Sockets. Aircraft Equipment. Unit., Aerodynamic Kit For Vortex Generation, Approved By Anac, To Be Used On Air Tractor 802F Model Aircraft. Kit Capable Of Providing Reduction In Aircraft Stall Speed, Improving Aircraft Maneuverability, Increasing Aerodynamic Efficiency Allowing Takeoffs On Shorter Runways. It Shall Have Small Aluminum Blades In An Extension Line Aft Of The Leading Edge Of The Wing And Tail Surfaces, Allowing Control Of Air Flow Over The Upper Surface Of The Wing In Order To Create Vortices, Energizing The Boundary Layer. It Should Result In Better Performance At Low Speeds And High Angles Of Attack. Must Be Made Of Aircraft Grade Aluminum Suitable For Paint Acceptability Prior To Installation. Unit., 12M /H Flow Rate Motor Pump Set For Fueling Diesel/Kerosene Aircraft, Portable, With Aviation Kerosene Engine, Composed Of: 01 Engine Powered By Aviation Kerosene; 01 Centrifugal Pump; 01 Absorber Filter; 01 Gravity Supply Nozzle; 01 Fisherman For 200 L Metal Drum; 01 10M Dn40 Discharge Hose; 01 5M Dn40 Suction Hose; 01 Wooden Box For Transport; 01 Fabric Motor Pump Protection Cover; 01 Tool Kit; 01 User Manual. Technical Features:A. Engine Type: 4 Stroke Air Cooled; Displacement: 211; Maximum Power: 4.7 Hp / 3600 Rpm; Fuel: Diesel And/Or Kerosene; Fuel Tank: 2.5 L; Fuel Tank With Level Indication; Oil Reservoir: 0.8 L; Consumption: 1.6 L/H; Start: Retractable Manual; Shaft: Keyed With Brass Sleeve And Viton Type Seal (O Ring); Engine Weight: 27 Kg.B. Fuel Pump Pump Body Material: Cast Aluminum; Pump Body Diameter: 195 Mm; Viton Type Pump Body Seal; Pump Volute Diameter: 160 Mm; Volute Treatment: Nickel; Viton Type Volute Seal; Number Of Rotors: One (01); Pump Impeller Diameter: 119 Mm; Pump Rotor Treatment: Nickel; Suction Diameter: 1.1/2 ; Settlement Diameter: 1.1/2 ; Maximum Vac Height
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
