Bids Are Invited For Acquisition Of Fixed Chair With Clipboard For Auditorium

(L1) 7101.38142-Fixed Chair With Clipboard, Polypropylene, Anatomically Conformed Seat And Back Injected In Structural Pigmented Polypropylene Resin Of Great Mechanical Resistance And Easy Cleaning, Back With Direct Attachment To The Metal Structure Through Attachment On The Part Itself Does Not Require The Use Of Screws And Maintains The Continuity Of The Design, Seat And Back With 3 Depression Details (Grooves) With A Depth Of 2.5 Mm And 10 Mm Wide, Plastic Back With Three Ribs On The Back 7 Mm High And 2.5 Mm Thick 36 Mm Apart, Metal Structure Continuous Structure, Side Back Support Are The Same Piece (Tube) Without Seams Or Welds, Sides In Shape Close To A Closed Trapezoid (Top Part Smaller Than The Bottom), The Continuous Fixed Structure It Is Made Of Curved Steel Tube With A Diameter Of 14.00 Mm And A Thickness Of 1.90 Mm, Fully Welded By Mig System And Painted Surface Finish, Finished In Fully Automated Electrostatic Painting In Epoxy Powder With Anti-Rust Pre-Treatment (Phosphatized), Completely Covering The Structure With A Film Of Approximately 100 Microns With Properties Of Resistance To Chemical Agents, Fixing The Seat On The Back Using Two Screws With A Phillips Head And Special Thread For Plastics, The Front Part Of The Seat Is Fixed Using Two Plastic Hooks From The Seat Itself, Clipboard Injected Into Structural Textured Abs, With Anti-Panic System Which Meets Safety Standards In Collective Environments, Such As Auditoriums, Classrooms And Training Rooms, With Body For Fixing The Clipboard To The Armrest In Aluminum Alloy Injected, Units. Size: Unit, (L2) 7101.38142-Fixed Chair With Clipboard