Tenders Are Invited For Delivery Of A Wheel Loader For Miejskie Przedsiębiorstwo Gospodarki Komunlnej Sp. Z O. O. In Tarnów

The Subject Of The Order Is The Supply Of A Charger For The Needs Of Miejskie Przedsiębiorstwo Gospodarki Komunlnej Sp. Z O. O. In Tarnów With The Following Parameters: 1) Basic Parameters Of The Machine: A) Year Of Production No Earlier Than 2020, B) It Is Not A Prototype Device, C) It Comes From Mass Production, D) Mileage Not Exceeding 13,000 Mth, E) Total Height (Including With Additional Equipment) Maximum 3480 Mm,F) Min. Ground Clearance 420 Mm,G) Total Operating Weight In The Range Of 18,000 Kg - 20,000 Kg,H) Total Width In The Range From 2700 To 3100 M,I) Dump Height For The Opening Angle Buckets 45 Degrees - Not Less Than 2600 Mm, J) Height To The Bucket Rotation Pin Not Less Than 4000 Mm, 2) Braking System: A) Fully Hydraulic Wet Disc Brakes For All Wheels, B) Independent Brake Circuit For The Front And Rear Axles ,3) Electrical System:A) Voltage 24V,B) 2X12v Batteries Adapted To The Needs Of The Machine,C) Mechanical Power Switch,D) Lighting In Accordance With Applicable Regulations Enabling Movement On Public Roads,E) Work Lights,F) Sound Signaling Of Running Reverse Gear,G) Reverse Gear Flashing Light,4) Cabin:A) Cabin Meeting Rops/Fops Standardsb) Cabin Equipped With Automatic Air Conditioning, Ventilation, Heating,C) Noise Level In The Cabin Not Exceeding 70 Db (A) According To Iso 6396 /Sae J2105,D) Pneumatic Operators Seat, Adjustable With Heating Function, Equipped With A Self-Retractable Seat Belt And Two Adjustable Armrests,E) Interior Lighting, F) Front And Rear Window Wipers And Washers,G) Multifunctional Display Of The System Monitoring Operating Parameters In Polish Language, H) Steering Column Adjustment In Two Planes,I) 2 Interior Mirrors,J) Right And Left Exterior Mirrors, Heated,K) Dashboard And Other Descriptions In Polish,L) Reversing Camera With Color Display,M) Filter Cabin, Two-Stage With Ventilation Maintaining Overpressure In The Cabin With A Carbon Insert,N) Radio With Sound System,O) Cb Radio Operating In The Bands Of 40 Am Modulation Channels And In Pl Mode + Antenna,P) 12V Socket,Q) Sun Blind,R) Storage Compartment Instructions And Tools,S) Handle (Knob) On The Steering Wheel,T) Additional External Cabin Filter5) Work Equipment:A) High Dump Bucket With Capacity Min. 4 M3, B) Boom Shock Absorption System, C) Towing Hitch At The Rear Of The Machine With A Pin, D) Automatic Central Lubrication System, 6) Drive/Engine: A) Liquid-Cooled Diesel Engine With A Minimum Power Of 140 Kw (Compliant With The Iso Standard 9249 Or Saej 1349),B) Minimum Capacity 6L,C) Automatic Engine Shutdown Function Or Automatic Revving Function After 25 Seconds Of Operator Inactivity,D) Engine Meeting At Least Eu Tier Iv Exhaust Emission Standards,E) Air Filter,F ) Pre-Fuel Filter With Water Separator, G) Fuel Tank With Fuel Filler Secured With A Key Lock, H) Machine Adapted To Our Climate Zone, 7) Chassis: A) Torque Converter With Minimum 4 Front Gears And 3 Rear Gears, B) System Turning - Articulated Frame With Two Steering Cylinders, C) 4-Wheel Drive, D) Reinforced Drive Axles, E) Total Oscillation Angle Of The Rear Axle Minimum 24 08) Hydraulic System: A) Powered By A Multi-Pressure Pump With Variable Capacity, B) Hydraulic System Pressure Min. 220 Mpa,C) Pump Capacity Min. 200 L/Min, D) Control Of The Equipment Using A Multi-Function Joystick Equipped With A Travel Direction Switch And An Additional Hydraulic Line Switch, 9) Chassis And Tires: A) Front Mudguards, B) Full Steel Rear Wheel Mudguards, C) 23.5 R25 Tires Class L5, D) Cover Of The Entire Chassis, 10) Gearbox: A) Automatic Gearbox Enabling The Ability To Change Gear Under Load, B) Operating Mode Selection System, C) Torque Converter Lock, D) Automatic Downshift Function, 11) Cooling System :A) Radiator Fan With Hydraulic Drive And Automatic Function Of Changing The Direction Of Rotation, B) The System Is Located In A Way That Protects It Against Excessive Dust And The Possibility Of Mechanical Damage, C) The Design Of The Cooling System Facilitates Quick Cleaning Of Each Radiator With Compressed Air, D) Non-Clogging Radiator With Wide Spaces Between Cooling Fins (Cores), 12) Other Equipment: A) Fire Extinguisher, B) First Aid Kit, C) Set Of Basic Tools For Operating The Machine, Lubricator, Lockable Tool Box, D) Full Triangle For Slow-Moving Machines. 13) Documentation: The Contractor, Together With The Machine, Will Provide The Ordering Party With Documents Prepared In Polish Or Translated Into Polish, Allowing The Use Of The Machine In Accordance With The Law And With Its Technical And Economic Purpose, Including: A) Certificate (Declaration) Of Conformity (Ce Certificate) Or Ec Declaration Of Conformity Or A Certificate Of Compliance With The Standard Issued By The Manufacturer, B) Technical And Operational Documentation (Dtr) And Other Installed Components And The Machines Operating Manual In Polish, C) Extract From The Approval Certificate, D) Spare Parts Catalog, E) Warranty Document With Service Book (Warranty Card Or Book), F) Schedule Of Technical Inspections, G) Conditions Of Warranty Service, H) Other Documents Required By Law. Other Provisions In The Swz