Tenders Are Invited For Renovation Of Municipal Road No. 887626Z In Miechęcino

The Municipal Road Covered By The Study Has A 3.0 M Wide Paving Surface On The Section 0+000 To 0+125, And On The Section 0+125 To 0+251 There Is A Surface Made Of Various Types Of Used Concrete Elements. In The Demarcation Zone There Are Energy, Sanitary, Gas And Water Supply Facilities. The Surface Is Designed To Be Made Of Pds Reinforced Concrete Slabs With Dimensions Of 1.5 X 3.0 M On A 15 Cm Thick Gravel Base, With A Road Width Of 3.0 M And Reinforced Double-Sided Shoulders. Crushed Aggregate Thickness 15 Cm, Width 0.75 Cm, Length 251 Meters. In Places Where Slabs Cannot Be Used, Paving Stones Made Of Concrete Blocks Will Be Provided. 8 Cm On A Cement-Sand Ballast Thick. 10 Cm And A Base Of Thick Gravel. 15 Cm, Closed On The Outer Edge With A Resistor On A C 12/15 Concrete Footing In The Amount Of 0.05 M3/Mb. As Part Of The Implementation, The Contractors Responsibilities Also Include: - Preparation And Introduction Of Temporary Traffic Organization For The Duration Of Construction - Introduction Of Permanent Traffic Organization, Through The Purchase And Installation Of Vertical And Horizontal Road Signs - Marking The Construction Site And The Road After Construction - Two Information Boards On The Sources Of Funding , In Accordance With The Information Board Template - Annex No. 11 To The Swz. The Detailed Scope Of The Subject Of The Order Was Specified In The Construction Design, Technical Specification For The Execution And Acceptance Of Construction Works And In The Draft Contract. These Documents Constitute Annexes To The Specification Of Contract Terms, Hereinafter Referred To As Swz.