Bids Are Invited For Registration Of Prices For The Acquisition Of Equipment, Tools And Materials, And Execution Of Equipment Services; For Maintenance Of Squares, Parks And Gardens, To Be Purchased As Needed, For A Period Of 12 (Twelve) Months.

Two-Stroke Gasoline Chainsaw, Power 2.6 Kw (3.5 Hp), Maximum Displacement Of 50.2 Cm³, Fuel Tank With Capacity Over 400 Ml, Chain Lubrication By Pump With Rotating Piston And Flow Regulation, Tank Of Oil With A Capacity Of Over 200 Ml, Approximate Weight Without Cutting Set 4.8 Kg, 40 Cm Bar, 325” Pitch Chain With 33.5 Teeth, Front Hand Guard With Safety Brake, Front Hand Cable, Cable Rear Hand Car, Chain Tension Device, Anti-Vibration System, Maximum Rotation 14,000 Rpm Slow To 2800Rpm., Two-Stroke Gasoline Engine Pruner, Power 0.70 Kw, Maximum Displacement Of 22.7 Cm³, Fuel Tank With Capacity Greater Than 200 Ml, Anti-Vibration System, Swivel Cable, Approximate Weight 5.3 Kg, Cutting Length Of 600 Mm., Side Brushcutter Two-Stroke Gasoline Engine, 0 Kw, Maximum Displacement Of 38.9 Cm³, Fuel Tank With Capacity Greater Than 500 Ml, Approximate Weight Without Cutting Set 7.9 Kg, Anti-Vibration System, Total Length 1850 Mm, With 42-2 Cutting Head, Back Blower: Gasoline Engine, Two-Valve 2-Stroke Engine , Maximum Displacement Of 64.8 Cm³, Minimum Power Of 4.0 Hp, Maximum Rotation Of 7,200 Rpm, Idle Speed Of 2,500 Rpm, Flow Rate Above 1700 M3/H And Speed Above 89 M/S, Weight Of 9.8 Kg, , Motopoda 2-Stroke, Gasoline Engine, With Transport Eye, Maximum Cylinder Capacity Of 36.3 Cm³, Minimum Power Of 1.4 Kw, Chain Lubrication By Pump With Rotating Piston, Rod Expansion Range Up To 3.9 Meters, Saber: 30 Cm, 3/8” Chain 1.1Mm 22 Teeth, Weight Approximately 7.2 Kg., High Pressure Washer Minimum 3.1Kw Electric Motor, Bronze Pump, Stainless Steel Piston, Maximum Pressure 200 Bar, Minimum Working Pressure 122 Bar, Maximum Flow 700 L/H, High Pressure Hose Minimum 10 Meters With Steel Mesh, Pistol With Safety Lock, Chain Pitch 0, 325, 33 Teeth, For Stihl Ms 260 Chainsaw, Saber 40 Cm, 16, 1, 6 Mm 3/8, For Stihl Ms 260 Chainsaw, Brushcutter Grease In 80G Tube, Lithium Base, With Applicator Nozzle Compatible With Stihl Brushcutters, 2 (Two) Pointed Blade, 305Mm , Steel, 3.9Mm Thick, Compatible For Stihl Brushcutter Fr 220 With Guarantee Against Breakage, 3 (Three) Tips Blade, 300Mm, 20Mm Hole, 3.9Mm Thickness, Cutting Head, For 3.00 Thread Mm, Wire Load Capacity 3.0 Mm Of 5 Meters For Stihl Brushcutter, Model Fs 220, Double Brushcutter Belt For Shoulders, With Padded Handles And Side Protection, Coil With 3.0 Mm Square Cutting Wire, With At Least 300 Meters, 22 Teeth Chain For Motopodapasso 3.8” 1.1Mm, Compatible With Motopoda Model Ht 135 From Stihl