Bids Are Invited For Acquisition Of Electronic Components For Experiments On Embedded Systems, For Delivery To Ufscar Campus São Carlos, According To Quantities, Respective Technical Specifications And Batch Arrangements Contained In Annex I Of The Notice.

Kit With 37 Modules And Sensors For Arduino, Must Come With An Organizing Box. Kit Components List: 1 X Joystick Module With 2 Axis And 1 Button; 1 X 1 Channel Relay Module; 1 X Sound Sensor Module; 1 X Sensitive Sound Sensor Module; 1 X Line Follower Module; 1 X Obstacle Detection Module; 1 X Flame Detector Module; 1 X Linear Hall Effect Sensor Module; 1 X Touch Sensor Module; 1 X Digital Temperature Sensor Module With Thermistor; 1 X Active Buzzer Module; 1 X Passive Buzzer Module; 1 X 5Mm Rgb Led Module; 1 X Rgb Smd Led Module; 1 X Rg 5Mm Led Module; 1 X Rg 3Mm Led Module; 1 X Digital Magnetic Switch Module (Reed-Switch); 1 X Miniature Magnetic Switch Module (Reed-Switch); 1 X Heartbeat Sensor Module; 1 X Automatic 5Mm Rgb Led Module; 1 X Laser Emitter Module; 1 X Button Module; 1 X Shock Sensor Module; 1 X Rotary Encoder Module; 1 X Led Module Driven By Mercury Sensor; 1 X Tilt Sensor Module; 1 X Motion Sensor Module; 1 X Ldr Photo Resistor Sensor Module; 1 X Dht11 Humidity And Temperature Sensor Module; 1 X Analog Hall Effect Sensor Module; 1 X Magnetic Hall Effect Sensor Module; 1 X Ds18b20 Digital Temperature Sensor Module; 1 X Thermistor Temperature Sensor Module; 1 X Ir Led Module 5Mm; 1 X Ir Receiver Module; 1 X Impact Sensor Module; 1 Must Have 14 Digital Inputs And Outputs (Of Which 6 Can Be Used As Pwm Outputs), 8 Analog Inputs, An On-Board Resonator, A Reset Button, And Holes For Attaching Header Pins, Hc-Sr04 Ultrasonic Sensor - Must Be Able To Measure Distance From 2Cm To 4M Accurately. The Module Must Have A Ready Circuit With Emitter And Receiver Coupled And 4 Pins (Vcc, Trigger, Echo, Gnd) For Measurement. Power: 5V Dc, Operating Current: 2Ma, Effect Angle: 15º, Range: 2Cm ~ 4M, Accuracy: 3Mm., Chip Esp32-Wroom-32D - Processor: Xtensa 32-Bit Lx6 Dual Core Clock: 80 À 240 Mhz (Adjustable); Rom Memory: 448Kb; Sram Memory: 520Kb; External Flash Memory: 32-Bit Access And 4Mb; Supply Voltage: 2.7 To 3.6 Vdc; Logic Level Voltage: 3.3Vdc (Does Not Tolerate 5V); Consumption Current: 80Ma (Typical)Consumption Current: 500Ma (Maximum); Interfaces: Sd Card, Uart(3 Channels), Spi (3 Channels), Sdio, I2c (2 Channels), I2s ​​(2 Channels), Ir, Pwm Led (2 Channels) And Pwm Motor (3 Channels); Gpio Types: Digital Io (36), Adc 12-Bits (16 Channels), Dac 8-Bits (2 Channels), Capacitive Sensor (10 Channels); Lna Pre-Amplifier; Wifi 802.11 B/G/N: 2.4 To 2.5 Ghz; Wifi Security: Wpa / Wpa2 / Wpa2-Enterprise / Wps; Wifi Encryption: Aes/Rsa/Ecc/Sha; Bluetooth: 4.2 Br / Edr E Ble (Bluetooth Low Energy); Integrated Rtc: 8Kb (Slown / Fast); Integrated Sensor: E Hall Temperature; Working Temperature: -40° To 85° C; Compatible With: The Arduino Ide Dimensions: 25.5 Specifications:- Operating Voltage: 3.0 - 7.2V- Rotation Angle: 180 Degrees- Speed: 0.12 Sec/60Degrees (4.8V) No Load- Torque: 1.2 Kg.Cm (4.8V ) And 1.6 Kg.Cm (6.0V)- Operating Temperature: -30C ~ 60C- Gear Type: Nylon- Cable Size: 245Mm- Dimensions: 32 X 30 X 12Mm- Weight: 9Gmust Include:01 - Servo 9G Tower Pro Sg9003 - Hélices03 - Screws, Wifi Esp32 Bluetooth Module 30 Pins - Microprocessor