Tenders Are Invited For Task 1: Adding Road Lighting Nowa Wieś - Borek Task 2: Installing Road Lighting In The Village Of Poręby Kupieńskie

The Subject Of The Order Is The Implementation Of The Task Titled: Task 1: Extension Of Road Lighting Nowa Wieś - Borek. Task 2: Construction Of Road Lighting In The Poręby Kupieńskie Village. The Scope Of The Order Includes: Task 1. Extension Of Road Lighting In Nowa Wieś - Borek1) Construction Of An Overhead Line Type Asxsn 2X25mm2, Length 211 M.2) Construction Of 5 Pcs. Of Spun Concrete Lighting Poles With 10.5 M High With Led Fixtures With Nema 5/7 Pin Sockets And Drivers. Led Fixtures Luminous Flux Min. 9750 Lm, The Scope Of Lighting According To The Land Development Design Is The Construction Of Lines And Poles From O13 To O17.3) Earthing On The O17 Pole4) Installation Of Lighting Controllers On The Existing Lighting 12 Pcs.5) Others In Accordance With The Detailed Design. Task 2. Implementation Of Lighting At Road In The Village Of Poręby Kupieńskie1) Construction Of An Overhead Line Type Asxsn 2X25mm2, 94.5 M Long.2) Construction Of 2 Pcs. Of Spun Concrete Lighting Poles, 12 M High, With Led Fixtures With Nema 5/7 Pin Sockets Along With Controllers. Led Fixtures Luminous Flux Min. 7721 Lm, The Scope Of Lighting According To The Land Development Design Is The Construction Of Lines And Poles From O2 To O3.3) Earthing On The O34 Pole) Others In Accordance With The Detailed Design. Minimum Requirements For Led Luminaires: 1) Housing Made Of Die-Cast Aluminum, The Upper Part Of The Body Is Made Of One Element, Free Of Joints, Hinges And Ribs 2) Powder-Coated Body With Electrostatic Coating Enabling Spontaneous Removal Of Dirt From The Housing 3) Two-Chamber Housing, Separate Chamber For Connecting The Power Supply And Control System Elements4) The Luminaire Is Made In Class Ii Anti-Shock Protection5) The Luminaire Is Equipped With A System That Regulates The Pressure In The Luminaire, Preventing Moisture Condensation Inside The Luminaire6) The Luminaire And Accessories Chamber Is Ip 66 Tight 7) Impact Resistance - Ik 078) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K 9) Lamp Luminous Flux - In Accordance With The Description Above10) Luminaire Power Supply System Enabling Control Of A Digital Dali Signal Or An Analog 0-10 V Signal 11) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Luminous Flux Of All Led Sources Simultaneously And Not By Turning Off Individual Led Panels In One Luminaire 12) Luminous Efficiency Of The Luminaire (Taking Into Account All Losses) Min. 160 Lm/W13) Power Factor (Cos Φ)≥0.98 For Rated Power, Maintaining Power Factor (Cos Φ) Above 0.95 When Controlling The Luminaire In The Range Of 0-100% Of Rated Power13) Resistance Of The Luminaire To Overvoltages: 10 Kv. 14) The Luminaires Hook Should Be An Integral Part Of The Luminaire And Be Able To Be Mounted On A Boom Or Directly On Lighting Poles. The Hook Should Be Able To Adjust The Angle Of Inclination 0-15⁰ And -15-0⁰15) The Fixture Is Equipped With A Nema 5/7Pin Socket16) Warranty Min. 5 Years (60 Months) From The Date Of Acceptance Of The Works Note: If The Swz Or Annexes To The Swz, Including Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, Would Indicate Trademarks, Origins, Technical Approval Standards, Patents In Relation To Certain Materials And Devices, The Ordering Party Shall, In Accordance With Joke. 99(5) Of The Public Procurement Act Allows The Submission Of Equivalent Products. All Products From Specific Manufacturers Specify The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only A Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. Therefore, The Use Of Manufacturer/Product Names Is For Example Purposes Only. When Describing The Subject Of The Order, The Ordering Party, Indicating The Name Of A Specific Manufacturer (Supplier) Or A Specific Product, Also Allows Equivalent Products With Quality And Performance Parameters. Equivalent Materials Must Be Mentioned By Name In The Offer, And The Burden Of Proving That The Parameters Required By The Ordering Party Are Met Rests With The Person Submitting The Offer. Equivalent Materials Cannot In Any Way Lower The Standard And Cannot Change The Principles And Technical Solutions Adopted In The Design Documentation, And Therefore Cannot Result In The Need To Redesign Any Elements, Nor Can They Deprive The User Of Any Performance, Functionality, Or Usability Described Or Resulting From The Design Documentation. . The Contractor Submitting An Equivalent Offer Will Be Obliged To Prove To The Ordering Party That The Equipment Or Materials It Offers Are Equivalent To Those Proposed In The Project. The Contractor Will Provide The Necessary Information Regarding The Materials Accepted For The Offer, Confirming The Equivalence Of The Offered Devices In Relation To Those Proposed In The Project. The Implementation Of The Subject Of The Order Must Be Consistent With The Offer And Swz, In Particular With: A) Description Of The Subject Of The Order / Technical Documentation (Chapter Iii), B) Important Provisions Of The Contract (Chapter Iv), C) Bills Of Quantities (Chapter Ii) - The Bill Of Quantities Is Of An Auxiliary Nature.