Tenders Are Invited For Construction Of Playgrounds With Elements Of An Outdoor Gym In The Józefów Commune

A) Construction Of A Playground At The Hydrophore Plant In Majdan Negry 1. A Modular Set Consisting Of Three Hexagonal Towers, A Climbing Wall, A Slide (Slide And An Overgrowth Mat) Mounted On A Tower Connected To The Other Towers By A Rope Bridge, A Tunnel Passage And A Two-Step Passage, Plus A Steering Panel, Slider Panel, Vertical Abacus, Pear-Moving Wheel Panel, Plum Beads Panel. Dimensions 420 X 320 X 310 Cm +/- 5%, Made Of Steel Pipes And Profiles Of Various Diameters Protected Against Corrosion, Mounted In A Concrete Foundation, Finishes Made Of Hdpe Boards, Anti-Skid Plywood, Stainless Steel Sheet, Polyester Varnish Fall Height 60 Cmb) Construction Of The Square Playground At The Primary School In Majdan Negrym1. A Modular Set Consisting Of Two 1.2 M Slides (Slides) Mounted On Towers With A Roof, Connected By A Platform With Side Protection, Two Towers Without A Roof And A Ladder Plus Two Hypertrophic Mats On The Slides (Slides). Dimensions (Length X Width X H) 400 X 350 X 300 Cm +/- 5%, Made Of Steel Pipes Ø 77 Cm, +/- 5%, And Pipes And Profiles Of Various Diameters Protected Against Corrosion, Mounted In A Concrete Foundation, Finishing Made Of Hdpe, Hdpe Antiskid Plates, Stainless Steel Sheet.2. Double Metal Swing Swing, Dimensions 200 X 380 X 240 Cm +/- 5%, Made Of Steel Pipes Ø 77 Cm, +/- 5% - 4 Legs And A Beam, Protected Against Corrosion, Mounted In A Concrete Foundation, Flat And Basket Seats Made Of Hdpe Boards With Stainless Steel Chains.3. Dragonfly Swing, Dimensions 50 X 300 X 110 Cm +/- 5%, Beam Made Of Steel Pipes Ø 77 Cm +/- 5%, Base Made Of Steel Pipes Ø 50 Cm +/- 5%, Protected Against Corrosion Mounted In A Concrete Foundation, Seat Finishes Made Of Hdpe Boards.4. Double Metal Swing Swing, Dimensions 200 X 380 X 240 Cm +/- 5%, Made Of Steel Pipes Ø 77 Cm, +/- 5% - 4 Legs And A Beam, Protected Against Corrosion, Mounted In A Concrete Foundation, Flat Seats Made Of Hdpe Boards With Stainless Steel Chains.5. Disc Carousel With Seats, Dimensions 150 X 150 X 86 Cm +/- 5%, Steering Wheel Base Made Of Steel Pipes Ø 110 Cm, Handrails Made Of Steel Pipes Ø 34 Cm +/- 5%, Protected Against Corrosion , Anchor Mounted In A Concrete Foundation, Base Made Of Checkered Sheet.6. Cone With Dimensions Ø 180 X 250 Cm +/- 5%, Made Of Steel Pipes Ø 160 Mm And 40 Mm Protected Against Corrosion And Rigging: Mounted In A Concrete Foundation.7. Balance Beam With Dimensions 75 X 240 X 38 Cm +/- 5% Made Of Steel Pipe Ø 40 Mm +/- 5% Protected Against Corrosion And Round Steps Made Of Hdpe Board: Mounted In A Concrete Foundation.8. Platform With Beams Dimensions 75 X 240 X 140 Cm +/- 5%, Made Of Steel Pipes Ø 77 Mm And Pipes And Profiles Of Various Diameters Protected Against Corrosion And Glued Square Timber 100 X 100 Mm, Reinforced Rope Ø 16 Mm, Mounted In A Concrete Foundation. 9. Tank Car With Dimensions 105 X 410 X 170 Cm +/- 5%, Made Of Ø 77 Mm Steel Pipes Protected Against Corrosion, 6 Pieces, And A Tube Passage, Ramp, Steering Wheel, Mounted In A Concrete Foundation. C) Construction Of A Playground With Gym Elements External In Majdan Kasztelański1. A Modular Set Consisting Of Two 1.2 M And 0.9 M Slides (Slides) Mounted On Connected Hexagonal Towers, A 1.2 M Climbing Wall Plus Two Hypertrophic Mats On The Slides (Slides), Plus A Cat Rope Ridge For A 0.9 M Platform And Slider Panels Rocket, String Sorter, Porthole, Pear Basket, Pear Moving Wheel. Dimensions 350X 460 X 365 Cm +/- 5%, Made Of Steel Pipes Ø 77 Cm, +/- 5%, Pipes And Profiles Of Various Diameters Protected Against Corrosion, Mounted In A Concrete Foundation, Finishes Made Of Hdpe Boards, Anti-Skid Plywood, Stainless Steel Sheet .2. Double Metal Swing Swing, Dimensions 200 X 330 X 240 Cm +/- 5%, Made Of Steel Pipes Ø 77 Cm, +/- 5% - 4 Legs And A Beam, Protected Against Corrosion, Mounted In A Concrete Foundation, Flat Seats Made Of Hdpe Boards With Stainless Steel Chains.3. Dragonfly Swing, Dimensions 50 X 300 X 100 Cm +/- 5%, Beam Made Of Steel Pipes Ø 77 Cm +/- 5%, Base Made Of Steel Pipes Ø 50 Cm +/- 5%, Protected Against Corrosion Mounted In A Concrete Foundation, Seat Finishes Made Of Hdpe Boards.4 Scooter Type Rocker, Dimensions 30 X 110 X 90 Cm +/- 5%, Made Of Hdpe Boards - Body, Steel Spring With Base Protected Against Corrosion, Mounted In A Concrete Foundation .5. Dragon Type Ladder, Dimensions 60 X 390 X 150 Cm +/- 5%, Made Of Steel Pipes Ø 34 Cm +/- 5%, Protected Against Corrosion, Mounted In A Concrete Foundation6. Metal Bench With Backrest Dimensions 50 X 150 X 80 Cm +/- 5%, Frames Made Of Anti-Corrosion Protected Steel Profiles Mounted In A Concrete Foundation, Seat And Backrest Made Of Boards7. Two-Station Device For Seated Bench Press And Overhead Lift Mounted On A Pylon With Instructions And Description Of Exercises. Dimensions Approximately: 2400 X 900 X 1900 Mm (+/-5%) Max Load Weight: 120 Kg, (+/-5%) Device Compliant With The Pn-En16630:2015-06 Standard Sitting Press Functions: Strengthens Muscles Of The Arms, Chest, Back And Shoulder Girdle. Improves Overall Physical Condition. Level Of Difficulty - Medium. Functions Of The Upper Lift: Strengthens The Muscles Of The Shoulder Girdle, Back And Arms. Improves Overall Physical Condition. Difficulty Level – Medium.8. Device Type - Walker/Runner + Rowing Machine + Elliptical Trainer + Bicycle Mounted On A Double Pylon With Instructions And Description Of Exercises. Dimensions: 2900 X 3360 X 1800 Mm (+/-5%) Max Load Weight: 120 Kg, (+/-5%) )The Device Complies With The Pn-En16630:2015-06 Standard. Functions Of A Runner/Walker: Strengthens The Muscles Of The Legs And Hip Belt. Makes The Tendons Of The Lower Limbs More Flexible And Stretches. Increases The Mobility Of Knee And Hip Joints. It Has A Beneficial Effect On The Circulatory System, Heart And Lungs. Difficulty Level – Medium. Rowing Machine Function: Activates All Parts Of The Body. A Good Device To Improve The Bodys Performance. Functions Of The Elliptical Trainer: Improvement Of The Muscles Of The Legs And Arms, General Improvement Of The Physical Condition And Performance Of The Body. It Has A Beneficial Effect On The Circulatory And Respiratory Systems. Reduces Fat Tissue. Level Of Difficulty - Medium. Function Of The Bike: Improvement Of Leg Muscles, General Improvement Of Physical Condition And Body Performance. It Has A Positive Effect On The Circulatory And Respiratory Systems. D) Construction Of A Playground With Elements Of An Outdoor Gym In Górecko Kościelne1. Disc Carousel With Seats, Dimensions 150 X 150 X 86 Cm +/- 5%, Steering Wheel Base Made Of Steel Pipes Ø 110 Cm, Handrails Made Of Steel Pipes Ø 34 Cm +/- 5%, Protected Against Corrosion , Anchor Installed In The Concrete Foundation, Base Made Of Checkered Sheet 2. Dragon Type Ladder, Dimensions 60 X 390 X 150 Cm +/- 5%, Made Of Steel Pipes Ø 34 Cm +/- 5%, Anti-Corrosion Protected, Mounted In A Concrete Foundation3. A Two-Station Device For The Seated Press And An Upper Pulley Mounted On A Pylon With Instructions And Exercise Descriptions. Dimensions Approximately: 2400 X 900 X 1900 Mm (+/-5%) Max Load Weight: 120 Kg, (+/-5%) Device Compatible With The Pn-En16630:2015-06 Standard. Functions Of The Sitting Press: Strengthens The Muscles Of The Arms, Chest, Back And Shoulder Girdle. Improves Overall Physical Condition. Level Of Difficulty - Medium. Functions Of The Upper Lift: Strengthens The Muscles Of The Shoulder Girdle, Back And Arms. Improves Overall Physical Condition. Difficulty Level – Medium.4. Device Type - Walker/Runner + Rowing Machine + Elliptical Trainer + Bicycle Mounted On A Double Pylon With Instructions And Description Of Exercises. Dimensions: 2900 X 3360 X 1800 Mm (+/-5%) Max Load Weight: 120 Kg, (+/-5%) )The Device Complies With The Pn-En16630:2015-06 Standard. Functions Of A Runner/Walker: Strengthens The Muscles Of The Legs And Hip Belt. Makes The Tendons Of The Lower Limbs More Flexible And Stretches. Increases The Mobility Of Knee And Hip Joints. It Has A Beneficial Effect On The Circulatory System, Heart And Lungs. Difficulty Level – Medium. Rowing Machine Function: Activates All Parts Of The Body. A Good Device To Improve The Bodys Performance. Functions Of The Elliptical Trainer: Improvement Of The Muscles Of The Legs And Arms, General Improvement Of The Physical Condition And Performance Of The Body. It Has A Beneficial Effect On The Circulatory And Respiratory Systems. Reduces Fat Tissue. Level Of Difficulty - Medium. Function Of The Bike: Improvement Of Leg Muscles, General Improvement Of Physical Condition And Body Performance. It Has A Beneficial Effect On The Circulatory And Respiratory Systems.5.3.2. Playground Equipment Should Be Installed In The Ground. In Addition, Regulations For The Use Of The Playground Made Of Multi-Layer Aluminum Panels Resistant To External Factors Must Be Prepared, Dimensions: 800X1200 Mm Mounted On Two Steel Posts Protected Against Corrosion - Design To Be Agreed With The Ordering Party. 5.3.3 Outdoor Gym Equipment Should Be Installed On The Ground Hardened With 6 Cm Thick Paving Stones With Edges On The Substructure − 3 Cm Bedding Made Of 2/5 Mm Stone Grit, − 10 Cm Basic Base Made Of A Mixture Of Unbound Aggregate 0/31.5 Kr 1-2 According To Wt-4:2010, (In Two Layers). For Calculations, Approximately 8 M2 Of Cubes Should Be Assumed For Each Device, Including The Edges. In Addition, Regulations For The Use Of An Outdoor Gym Made Of Multi-Layer Aluminum Plates Resistant To External Factors With Dimensions Must Be Prepared. 800X1200 Mm Mounted On Two Steel Posts Protected Against Corrosion - Design To Be Agreed With The Customer.