1.1. The Subject Of The Order Is The Delivery Of A Brand New Battery-Powered Ice Care Machine (Roller), Meeting All Iihf And Nhl Requirements, To The Tor - Tor Ice Rink In Toru At Ul. Bema 23/29.1.2. The Roller Must Be Equipped With An Electric Drive With A Power Of Not Less Than 24 Hp With A Maintenance-Free Single Ac Motor, Steplessly Transferred To All 4 Wheels And Powered By A Battery With A Capacity Of Not Less Than 840Ah, Factory Studded Wheels. The Machine Must Have A Complete Spare Wheel And A Reserve Of Approximately 200 Spikes. It Must Be Equipped With A Stepless Gearbox With Forward And Reverse Gear, A Knife Replacement Device, A Magnetic Strip, A Plate For Setting The Knife Angle And A Lubricator. All Functions Related To Ice Care Must Be Electronically Controlled From The Position Of The Roller Operator And Hydraulically Driven . The Machine Must Have The Following Parameters And Equipment: Total Length Up To 4,040 Mm, When Opening 5030 Mm Total Height Up To 2260 Mm, When Fully Opening 3073 Mm Snow Discharge At A Height Of 1050 Mm Total Width Up To 2130 Mm Turning Radius Up To 4870 Mm Width Of The Planing Knife Up To 1960 Mm Electric Hydraulic Drive With A Power Of Min. 11 Hp Constant Pressure Of The Planing Knife By A Flat Spring Side, Hydraulically Driven Brush For Sweeping Snow At The Board Fixed Distance Roller For The Board Snow Tank With A Capacity Of Min. 2.83 M3, Which Allows You To Compress Min. 3.54 M3, Lifted And Tilted For Emptying Planing Depth Min. 0.1 Mm Water Tank Made Of Corrosion-Resistant Material (Pe Plastic) With A Total Minimum Capacity Of 1050 L (Minimum Water Capacity For Ice Formation 740 L And 310 L For Washing) Water Pump For The Washing System, Hydraulically Driven Water Pump For Proportional Water Dispensing With Mechanical Drive From The Drive Shaft Front, Rear And Side Lighting Front And Rear Mirrors Hand And Foot Brake Emergency Switch Of The Machine Ice Polishing Cloth 2 Pieces Water Pump To Replenish The Water Level In The Batteries Transformer Charger Controlled By A Microprocessor With Wiring And Installation In A Place Indicated By The Ordering Party. Battery Bank Min. 840Ah. After Overnight Charging, It Must Be Possible To Perform At Least 19 Treatments Without Recharging On A Full-Size Ice Rink. Heated Operators Seat Wheel Washing System Other Necessary Elements Such As A Sight Glass For The Snow Hopper, A Slippery Surface In Places Where It Contacts The Snow, A Galvanized Planing Unit, Etc. Laser Panel Thickness Control System Remote System Thanks To Which, Using A Smartphone, It Will Be Possible To Check The Amount Of Ice Collected From The Surface, The Amount Of Water Poured, The Time Of Surface Maintenance, Battery Status, Service Time, Etc. The Machine Must Be Adapted To Quickly Replace The Knife Without The Need To Enter The Canal. The Knife Is Mechanically Fastened With Screws. In Addition, The Ordering Party Requires: A) An Authorized Warranty Service With A Response Time In The Event Of A Failure Of Up To 24 Hours, B) If The Repair Requires A Longer Time, The Provision Of A Replacement Machine With Comparable Parameters, C) Service Inspections Free Of Charge During The Warranty Period, In Accordance With The Manufacturers Guidelines, D) Operating Instructions With A Catalog Of Spare Parts And A List Of Service Activities In Polish, E) A Document Confirming The Year Of Production And The Factory Condition Of The Machine.1.3. A Detailed Description Of The Subject Of The Order And The Requirements For The Contractor Are Included In The Contract Template.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
