Bids Are Invited For Ostensive Ballistic Vest Level Iii-A Nij-0101.06.

Level Iii-A Ballistic Vest, Nij 0101.06. Size P Men As Attached In The Terms Of Reference. Unit, Nij 0101.06. Size M Male As Attached In The Terms Of Reference. Unit, Nij 0101.06. Size L Mens As Attached In The Terms Of Reference. Unit, Nij 0101.06. Mens Size Lg As Attached In The Terms Of Reference. Unit, Nij 0101.06. Size P Female As Attached In The Terms Of Reference. Unit, Nij 0101.06. Size M Female As Attached In The Terms Of Reference. Unit, Ballistic Plate With Minimum Characteristics: The Ballistic Plate Must Offer Level Iii Protection (Caliber 7, 62 Mm Nato Fmj With Minimum Velocity Of 838M/S And Maximum 856M/S), As Established And Determined By Standard Nij Std 0101.04, Revision A; The Required Ballistic Protection Must Be Of The Stand-Alone Type, That Is, It Must Provide Level Iii Ballistic Protection Autonomously, Without Needing To Be In Conjunction With A Level Iii-A Ballistic Panel Or Any Other Panel, Regardless Of The Level Of Protection; It Must Be Rigid And Manufactured With Ceramic Material, Or With Sheets Of Polyethylene, Or Sheets Of Aramid Fabric, Or Even By A Combination Of These Materials, At The Choice Of The Manufacturer; The Ballistic Plate Must Be Of The Single-Curve Type With Dimensions Of 250±10Mm One Of The Models To Be Adopted Must Feature Upper Chamfers Of 100 Plate. The Thickness, Without Finishing, Must Be 29±3Mm; The Plate Must Be Inherently Resistant To Uv Radiation, Water, Light, Sudden Changes In Temperature And Corrosive Agents; Finish: It Must Have A Finish That Contributes To Better Performance And Greater Durability Of The Plates, Made Using A Casing Conditioned To Its Shape And Dimensions, Made Of Polyamide 6.6 Fabric, Waterproof, Without Visible Edges, And Can Be Glued Or Similar Processes Adopted That Prevent The Entry Of Liquids That Could Compromise Its Ballistic Efficiency. The Finish Of The Casing Must Prevent Tears, Fraying Of The Edge Or Defects That Could Be Attributed To The Effort Caused By The Mass (Weight) Of The Plates; Identification: The Ballistic Plate Must Have A Label On The Impact Surface, Containing The Information Below In Portuguese