Conical, Long, Stackable Bollard, Made Of Rotomolded Plastic With Uv Protection, Weather-Resistant, In Citrus Orange Color, Measuring Approximately: Minimum Height Of 110 Cm, Top Diameter Of 10 Cm; Lower Diameter Of 20 Cm With Reinforced Flap; Solid Anatomical Top Without Holes, In T-Shape, In Order To Facilitate Grip (Fits An Adult Hand); Recycled Rubber Base In Black With Octagonal Shape, Weighing Between 6 And 7 Kg, With Opening And Recess For Perfect Fitting Of The Bollard; 02 Self-Adhesive Retro-Reflective Collars, Flexible, In White Color, With Acrylic-Based Metalized Microprismatic Elements, 10 Cm Wide Each, 8Cm Apart, Positioned In The Recessed Locations Of The Bollard At A Height Of No Less Than 60Cm. It Has In Its Upper Part, Just Below The Handle, Simetic Holes That Allow The Passage Of Plastic Tape To Isolate Areas, Chains And Ropes., Personalized Reflective Vest: Made Of 100% Polyester Fabric In Black With 3 X 3 Threads Per Cm2, Jacket Type And Sleeveless, Finished Throughout With 25 Mm Cotton Fabric Bias. Wide, Also In Black, Fixed To The Canvas Through Straight Seams. The Vest Must Have Three Horizontal Stripes 100 Mm Wide In Fluorescent Yellow On The Front And Back And Along Its Entire Length, Made Of Pvc With 0.40 Mm Polyester Lining. Thick And Fixed To The Screen Through The Process Of High Frequency Electronic Welding With 3 Mm Thickness.Front: Divided Into Two Flaps It Should Have On Its Upper Band On The Left Side Of The Chest The Application Of The Coat Of Arms Of Prohibition To Be Defined, Through Of The Silk-Screem Process In 6 Colors, Applied With Special Vinyl Paint In Order To Provide Perfect Adhesion To The Base And Guaranteeing Total Weather Resistance, Made Of Microprismatic Retroreflectors With A Minimum Reflectivity Of 330 Candelas/Lux M According To Abnt Standard 15292 E Fixed Using High Frequency Electronic Welding. On The Right Side: Attachment Of A 20 Mm Wide Female Velcro Strip That Allows For The Fixing Of An Identification Card, The Central And Lower Strips Must Have Retroreflective Strips In Microprismatic Pvc On The Fluorescent Yellow Color With 50 Mm. Of Width Each And Throughout Its Entire Length With A Minimum Reflectivity Of 330 Candelas/Lux M In Accordance With Abnt 15292 Standard, Fixed Through The High Frequency Electronic Welding Process And Positioned In A Centralized Manner. The Reflective Vest Must Have Its Closure On The Front, Through The Application Of 2 Velcro Strips Measuring 10 Mm Wide By 70 Mm Long In Black, Fixed To The Body Of The Vest And Centered On The Central And Lower Bands Of The Two Flaps Of The Vest In A Vertical Position To Allow It To Be Closed. Its Fixation Must Be Through The Process Of High-Frequency Electronic Welding. Back: The Back Strips Must Resemble A Traffic Sign Cone, With The First Strip Being Personalized With Two Logos To Be Defined By The Institution, Logo With The Same Width As The Strip. And Colored In Four Colors, With The Following Minimum Characteristics: Made Of Flexible, Undeformable And Unbreakable Pvc, In Fluorescent Orange And Ultraviolet Additives, With Reflective Strips. Minimum Height 75 Cm. Minimum Base Diameter 30 Cm. Base Made Of The Same Material, Square, With A Side Of At Least 40 Cm. Unit., Reflective Pantographic Barrier Accordion Extensible Barrier For B
