Tenders Are Invited For Purchase Of Switch, Next Generation Network Security Hardware, Transceiver Purchase Of Equipment, Purchases Of Goods, Goods And Installation Of The Network In The Administrative Building Switch Rack Type With 48 Ge Rj45 Poe 740W(802.3Af/At), 1 Consol (Rj45), 1 Mgmt Port And 4 10Ge Sfp+ Slots, Throughput 176 Gbps, Throughput 260 Mbps, Mac Address Memory 32000 Units, Same 4000 Vlans Supported, 8 Link Aggregation Groups Can Be Created, 2Mb Cache, 512Mb Ram, 64 Mb Flash, 768 Lines Of Acl Memories. The Switch Must Support L3 Network Protocols Such As Static, Dynamic Routing Protocols (Ospfv2, Ripv2, Vrrp, Bgp, Isis), Dhcp Server, Pim-Ssm, Ecmp, Bfd, Dhcp Relay, Urpf, Ip Conflict Notification. Admin Authentication Via Rfc 2865 Radius, Ieee 802.1X Authentication Port-Based, Ieee 802.1X Authentication Mac-Based, Ieee 802.1X Guest And Fallback Vlan, Ieee 802.1X Mab, Ieee 802.1X Dynamic Vlan Assignment, Radius Accounting, Acl, Ieee 802.1 Ab Lldp, Ieee 802. 1Ab Must Support Lldp-Med, Ieee 802.1Ae Mac Sec, Dhcp-Snooping, Dynamic Arp Inspection, Sticky Mac, Ieee 802.1X Open Auth, Ieee 802.1X Eap Pass-Through Security And Communication Protocols. Must Be Fully Compliant With Telnet, Ssh, Http, Https, Snmp V1/V2c/V3, Sntp, Standard Cli And Web Gui Interface, Packet Interceptor, Span, Rspan And Erspan, Link Monitor, Syslog Udp/Tcp Management And Monitoring Protocols. The Switch Must Be Controllable Through A Firewall Device. The Switch Must Support The 802.1S, 802.1D, And 802.1W Protocols. The Switch Must Support The Mac And Port-Based 802.1X Access Authorization Protocol. Administrators Who Will Manage The Switch Must Be Authorized Using A Central Radius Server. It Should Be Possible To Manage And Monitor The Switch Device Using The Http Rest Api Method. Changes Made To The Switch Should Be Saved In Different Files As Revisions. If Desired, The Switch Device Configuration File Should Be Able To Be Saved As Encrypted. The Switch Must Be Able To Recognize The Lldp And Lldp-Med Protocols And Devices That Support The Same Protocol Connected To It. A Switch Must Be Able To Block Broadcast, Unknown Unicast, And Multicast Traffic When It Exceeds A Certain Threshold By Using The Storm Control Feature. The Device Must Support Dhcp Snooping. The Device Must Have Dhcp Relay Function. The Device Must Have A Mac-Based Vlan Feature. It Should Be Able To Assign Different Mac Address On Port To Different Vlans. Switch Fcc, Ce, Rcm, Vcci, Bsmi, Ul, Cb, Rack Type With 48 Ge Rj45 Poe 740W(802.3Af/At), 1 Consol (Rj45), 1 Mgmt Port And 4 10Ge Sfp+ Slots, Throughput 176 Gbps, Throughput 260 Mbps, Mac Address Memory 32000 Units, Same 4000 Vlans Supported, 8 Link Aggregation Groups Can Be Created, 2Mb Cache, 512Mb Ram, 64 Mb Flash, 768 Lines Of Acl Memories. The Switch Must Support L3 Network Protocols Such As Static, Dynamic Routing Protocols (Ospfv2, Ripv2, Vrrp, Bgp, Isis), Dhcp Server, Pim-Ssm, Ecmp, Bfd, Dhcp Relay, Urpf, Ip Conflict Notification. Admin Authentication Via Rfc 2865 Radius, Ieee 802.1X Authentication Port-Based, Ieee 802.1X Authentication Mac-Based, Ieee 802.1X Guest And Fallback Vlan, Ieee 802.1X Mab, Ieee 802.1X Dynamic Vlan Assignment, Radius Accounting, Acl, Ieee 802.1 Ab Lldp, Ieee 802. 1Ab Must Support Lldp-Med, Ieee 802.1Ae Mac Sec, Dhcp-Snooping, Dynamic Arp Inspection, Sticky Mac, Ieee 802.1X Open Auth, Ieee 802.1X Eap Pass-Through Security And Communication Protocols. Must Be Fully Compliant With Telnet, Ssh, Http, Https, Snmp V1/V2c/V3, Sntp, Standard Cli And Web Gui Interface, Packet Interceptor, Span, Rspan And Erspan, Link Monitor, Syslog Udp/Tcp Management And Monitoring Protocols. The Switch Must Be Controllable Through A Firewall Device. The Switch Must Support The 802.1S, 802.1D, And 802.1W Protocols. The Switch Must Support The Mac And Port-Based 802.1X Access Authorization Protocol. Administrators Who Will Manage The Switch Must Be Authorized Using A Central Radius Server. It Should Be Possible To Manage And Monitor The Switch Device Using The Http Rest Api Method. Changes Made To The Switch Should Be Saved In Different Files As Revisions. If Desired, The Switch Device Configuration File Should Be Able To Be Saved As Encrypted. The Switch Must Be Able To Recognize The Lldp And Lldp-Med Protocols And Devices That Support The Same Protocol Connected To It. A Switch Must Be Able To Block Broadcast, Unknown Unicast, And Multicast Traffic When It Exceeds A Certain Threshold By Using The Storm Control Feature. The Device Must Support Dhcp Snooping. The Device Must Have Dhcp Relay Function. The Device Must Have A Mac-Based Vlan Feature. It Should Be Able To Assign Different Mac Address On Port To Different Vlans. Switch Fcc, Ce, Rcm, Vcci, Bsmi, Ul, Cb, Rack Type With 48 Ge Rj45 Poe 740W(802.3Af/At), 1 Consol (Rj45), 1 Mgmt Port And 4 10Ge Sfp+ Slots, Throughput 176 Gbps, Throughput 260 Mbps, Mac Address Memory 32000 Units, Same 4000 Vlans Supported, 8 Link Aggregation Groups Can Be Created, 2Mb Cache, 512Mb Ram, 64 Mb Flash, 768 Lines Of Acl Memories. The Switch Must Support L3 Network Protocols Such As Static, Dynamic Routing Protocols (Ospfv2, Ripv2, Vrrp, Bgp, Isis), Dhcp Server, Pim-Ssm, Ecmp, Bfd, Dhcp Relay, Urpf, Ip Conflict Notification. Admin Authentication Via Rfc 2865 Radius, Ieee 802.1X Authentication Port-Based, Ieee 802.1X Authentication Mac-Based, Ieee 802.1X Guest And Fallback Vlan, Ieee 802.1X Mab, Ieee 802.1X Dynamic Vlan Assignment, Radius Accounting, Acl, Ieee 802.1 Ab Lldp, Ieee 802. 1Ab Must Support Lldp-Med, Ieee 802.1Ae Mac Sec, Dhcp-Snooping, Dynamic Arp Inspection, Sticky Mac, Ieee 802.1X Open Auth, Ieee 802.1X Eap Pass-Through Security And Communication Protocols. Must Be Fully Compliant With Telnet, Ssh, Http, Https, Snmp V1/V2c/V3, Sntp, Standard Cli And Web Gui Interface, Packet Interceptor, Span, Rspan And Erspan, Link Monitor, Syslog Udp/Tcp Management And Monitoring Protocols. The Switch Must Be Controllable Through A Firewall Device. The Switch Must Support The 802.1S, 802.1D, And 802.1W Protocols. The Switch Must Support The Mac And Port-Based 802.1X Access Authorization Protocol. Administrators Who Will Manage The Switch Must Be Authorized Using A Central Radius Server. It Should Be Possible To Manage And Monitor The Switch Device Using The Http Rest Api Method. Changes Made To The Switch Should Be Saved In Different Files As Revisions. If Desired, The Switch Device Configuration File Should Be Able To Be Saved As Encrypted. The Switch Must Be Able To Recognize The Lldp And Lldp-Med Protocols And Devices That Support The Same Protocol Connected To It. A Switch Must Be Able To Block Broadcast, Unknown Unicast, And Multicast Traffic When It Exceeds A Certain Threshold By Using The Storm Control Feature. The Device Must Support Dhcp Snooping. The Device Must Have Dhcp Relay Function. The Device Must Have A Mac-Based Vlan Feature. It Should Be Able To Assign Different Mac Address On Port To Different Vlans. Switch Fcc, Ce, Rcm, Vcci, Bsmi, Ul, Cb, 20 Number 20 Number Number 2 Switch Rack Type With 24 Ge Rj45, 1 Consol (Rj45), 1 Mgmt Port And 4 10Ge Sfp+ And 2 40Ge Qsfp Slots, Throughput 288 Gbps, Throughput 428 Mbps, Mac Address Memory 36000 Units, 4000 Units At The Same Time It Should Have Vlan Support, 24 Link Aggregation Group Creation Capabilities, 4Mb Cache, 2Gb Ram, 128 Mb Flash, 1000 Lines Of Acl Memories. The Switch Must Support L3 Network Protocols Such As Static, Dynamic Routing Protocols (Ospfv2, Ripv2, Vrrp, Bgp, Isis), Dhcp Server, Pim-Ssm, Ecmp, Bfd, Dhcp Relay, Urpf, Ip Conflict Notification. Admin Authentication Via Rfc 2865 Radius, Ieee 802.1X Authentication Port-Based, Ieee 802.1X Authentication Mac-Based, Ieee 802.1X Guest And Fallback Vlan, Ieee 802.1X Mab, Ieee 802.1X Dynamic Vlan Assignment, Radius Accounting, Acl, Ieee 802.1 Ab Lldp, Ieee 802. 1Ab Must Support Lldp-Med, Ieee 802.1Ae Mac Sec, Dhcp-Snooping, Dynamic Arp Inspection, Sticky Mac, Ieee 802.1X Open Auth, Ieee 802.1X Eap Pass-Through Security And Communication Protocols. Must Be Fully Compliant With Telnet, Ssh, Http, Https, Snmp V1/V2c/V3, Sntp, Standard Cli And Web Gui Interface, Packet Interceptor, Span, Rspan And Erspan, Link Monitor, Syslog Udp/Tcp Management And Monitoring Protocols. The Switch Must Be Controllable Through A Firewall Device. The Switch Must Support 802.1S, 802.1D, And 802.1W Protocols. The Switch Must Support Mac And Port Based 802.1X Access Authorization Protocol. Administrators Who Will Manage The Switch Must Be Authorized Using The Central Radius Server. It Should Be Possible To Manage And Monitor The Switch Device Using The Http Rest Api Method. The Changes Made To The Switch Should Be Able To Be Stored In Different Files As Revisions. If Desired, The Switch Device Configuration File Should Be Able To Be Saved As Encrypted. The Switch Must Be Able To Recognize The Lldp And Lldp-Med Protocols And Devices That Support The Same Protocol Connected To It. A Switch Must Be Able To Block Broadcast, Unknown Unicast, And Multicast Traffic When It Exceeds A Certain Threshold By Using The Storm Control Feature. The Device Must Support Dhcp Snooping. The Device Must Have Dhcp Relay Function. The Device Must Have A Mac-Based Vlan Feature. It Should Be Able To Assign Different Mac Address On Port To Different Vlans. Switch Fcc, Ce, Rcm, Vcci, Bsmi, Ul, Cb, Rack Type With 24 Ge Rj45, 1 Consol (Rj45), 1 Mgmt Port And 4 10Ge Sfp+ And 2 40Ge Qsfp Slots, Throughput 288 Gbps, Throughput 428 Mbps, Mac Address Memory 36000 Units, 4000 Units At The Same Time It Should Have Vlan Support, 24 Link Aggregation Group Creation Capabilities, 4Mb Cache, 2Gb Ram, 128 Mb Flash, 1000 Lines Of Acl Memories. The Switch Must Support L3 Network Protocols Such As Static, Dynamic Routing Protocols (Ospfv2, Ripv2, Vrrp, Bgp, Isis), Dhcp Server, Pim-Ssm, Ecmp, Bfd, Dhcp Relay, Urpf, Ip Conflict Notification. Admin Authentication Via Rfc 2865 Radius, Ieee 802.1X Authenticat Tender Link : Https://Etender.Gov.Az/Main/Competition/Detail/295615
