Tenders Are Invited For Construction Of A Double Office For The Międzyrzecz And Rusinowo Forestry Areas

Execution Of Construction Works Consisting In The Construction Of A Foresters Office Building With Technical Infrastructure With The Following Characteristics: - A Detached, Single-Story Building, Without A Basement, With A Rectangular Plan, Dimensions: 7.06 M X 11.83 M; Height Of The Building At The Ridge 6.35 M, - Gross Volume 380.85 M3, Building Area 83.52 M2, Usable Area 61.90 M2 - Covering The Building With A Gable Roof With A Slope Angle Of 45°, Covered With Ceramic Roof Tiles; - Building To Be Constructed In Traditional Brick Technology, Wooden Roof Truss Structure; - Direct Foundations In The Form Of Reinforced Concrete Foundation Strips, With A Rectangular Cross-Section; - Foundation Walls Made Of Concrete Blocks; - Floor On The Ground With Thermal Insulation In The Form Of Polystyrene Boards Thick. 2 X 10 Cm On A Concrete Base, Finished With A Ceramic Floor On A Concrete Screed; - Internal Partition Walls Made Of Aerated Concrete Blocks Thick. 12 Cm; - Ceiling Above The Ground Floor Made Of Wooden Beams 14X22 Cm, Insulated With Mineral Wool With A Total Thickness Of 32 Cm;- Reinforced Concrete Rings, Poured On The Construction Site;- Reinforced Concrete Lintels, Combined With A Reinforced Concrete Ring, Poured On The Construction Site;- Roof Flashings As Well As Gutters And Downpipes (System Roof Flashings Or Made Individually From Steel Sheet);- Indoors Technically, A Ventilation System Was Designed: Emergency - Activated From The Outside And Inside Of The Warehouse, Ensuring At Least 10 Air Changes Per Hour; Continuous – Activated From Outside The Warehouse, One Hour Before Work Begins, Ensuring At Least Three Air Changes Per Hour; In Other Rooms: Gravity Ventilation With Spiro System Pipes, Using Ventilation Chimneys Located In The Roof Slope. - Typical Pvc, Aluminum Or Wooden Windows; - Typical External And Internal Doors; - Water Supply System: Supplying The Building With Water From The Water Supply Network; - Sanitary Sewage Installation: Sewage Disposal To The Sanitary Sewage Network; - Electrical Installation: Power Supply From The Power Grid. - Central Heating And Domestic Hot Water Heating Installation: The Building Will Be Heated Using Electric Convector, Wall-Mounted Or Floor-Standing Heaters; - Hot Water Will Be Supplied From An Instantaneous Electric Water Heater With A Tank; - Photovoltaic Installation With A Capacity Of 6.30 Kw: Designed On The Roof Slope To Ensure The Supply Of Electricity For The Central Heating Installation, Domestic Hot Water Heating. And Lighting And Plug Sockets; - Land Development In The Form Of Hardening The Area With Concrete Cubes For The Access Roads To The Designed Building, A Flagpole Next To The Building And A System Fence On A Plinth Within The Boundaries Of The Plot Along With A Steel Gate And Wicket. - Exit From The District Road No. 1051Z For The Plot In Question With A Concrete Pavement. This Order Is Carried Out Under The Form Of A Building Permit.