1. The Subject Of The Order Is The Development Of The Pitch Area In Lasocice By Building An Outdoor Gym And A Playground With A Sensory Path. The Investment Is Located In Lasocice, Plot No. 655.2. The Scope Of Works To Be Carried Out Includes: 1) Outdoor Gym - A Safe Surface Should Be Made Of Sandwich Panels Made Of Sbr Rubber Granules With A Colored Top Layer Of Thickness. 2.5 Cm (Free Fall Height >1 M). Make The Foundation Layer For The Slabs Of 10 Cm Thick Concrete. The Type Of Surface Used Should Absorb Falls, Reduce The Risk Of Bruises And Ensure Comfort Of Movement. The Gym Should Be Equipped With The Following Outdoor Gym Equipment: - Foot Press - 1 Pc, - Elliptical Trainer - 1 Pc, - Hand Press (Butterfly) - 1 Pc, - Runner - 1 Pc, - Tai Chi Rings - 1 Pc. And - Information Board - 1 Piece. 2) Playground - A Natural Playground Should Be Created Among Trees And Bushes With A Sensory Path That Stimulates The Sense Of Touch. The Sensory Path Should Be Made Of Various Surfaces, Such As Tree Bark, Pebbles, Coniferous Tree Cones, Sticks. The Playground Should Have A Sand Surface Of Min. 30 Cm (Particle Size From 0.25 To 8 Mm) And A Natural Grass Surface. The Playground Should Be Equipped With The Following Devices: - Double Swing - 1 Piece, - Spring Rocker - 1 Piece, - Sandbox - 1 Piece, - Mojave - 1 Piece, - House - 1 Piece, - Spring Rocker - Helicopter - 1 Pc, - Ropes - 1 Pc, - Picnic Bench - 3 Pcs, - Sensory Path - 1 Pc, - Board With Regulations For The Use Of The Playground - 1 Pc. All Playground Equipment And Outdoor Gym Should Be Installed On A Properly Prepared Ground And Foundation Ensuring Safety And A Stable Structure In Accordance With The Requirements Of The Relevant Manufacturer. The Colors Of The Outdoor Gym Equipment, Playground Equipment And Other Equipment Elements To Be Agreed With The Ordering Party At The Implementation Stage. The Contractor Is Obliged To Use Brand New Equipment, Made Of Materials With The Required Approvals And Certificates. The Contractor Is Obliged To Maintain The Minimum Protective Zones Of The Installed Devices And Follow The Recommendations Of The Installation Instructions For Individual Devices. The Contractor Is Fully Responsible For The Proper Installation Of Equipment, Including Works, Ensuring Work Safety And Fire Protection Conditions. And For The Organizational And Technical Methods Used In The Process Of Implementing The Subject Of The Contract. The Contractor Is Obliged To Deliver The Equipment At Its Own Expense, Using Its Own Means Of Transport, Or May Commission Delivery To The Carrier At Its Own Expense And Risk. Detailed Description Of The Subject Of The Order, Scope Of Works And The Method Of Execution Is Described In The Bill Of Quantities (Appendix No. 9 To The Swz), In The Technical Specification For The Execution And Acceptance Of Works Stwior (Appendix No. 10 To The Swz) And In The Design Documentation (Appendix No. 11 To The Swz).
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
