Request For Quotation Vacuum Filtration Device

The Vacuum Filtration Device Pvf-35 B Provides Rapid Filtering Of The Sample And Draining The Filtered Liquid Into The Receiver. Manufactured With 3 Funnels Under A Membrane Or Paper Filter 035Mm. The Device Includes: A Filter Cell With Funnels With A Volume Of 300 Ml, A Vacuum Station, A Receiver (Bunsen Flask) With A Volume Of 2500 Ml With A Stopper, A Set Of Connecting Hoses. 1) Filter Cell For Vacuum Filtration. It Consists Of A Manifold With Bases, At The Upper End Of Which There Are Titanium Frits For Placing Filter Discs. The Funnels Are Attached To The Bases Using Clamps; Taps Are Installed On The Manifold, Which Allow Each Funnel To Be Independently Disconnected And Connected To A Vacuum Source. There Are Marks On The Inside Of The Funnels That Allow You To Control The Filled Volume Of 100 Ml. Stainless Steel Cover Available On Request. (Filter Diameter 35Mm, Material - Stainless Steel, Working Volume - 300Ml, Number Of Funnels - 3, Overall Dimensions 122-872Mm * 206Mm * 122Mm, Weight - 1.3-7.6 Kg. 2) Vacuum Station For Creating A Vacuum Using Pressure Created By The Built-In Pump. Includes Frame Pump, Ejector And Buffer Tank. The Station Is Equipped With Taps And A Vacuum Gauge. Working Vacuum Is 0.35-0.96 Kgf/Cm2, Water Flow Rate Is 3.5-5.0 L/Min, Power Consumption Is 600 W, Power Supply Is Single-Phase 220V, 50Hz, Overall Dimensions Dimensions: 400Mm*280Mm*140Mm, Weight: 10 Kg. 3) Receiver (Bunsen Flask) For Filtering Under Vacuum And Collecting The Filtrate. Made Of Heat-Resistant Glass. A Stopper And A Fitting For Connecting A Vacuum Hose Are Installed In The Flask. Working Volume: 2500 Ml. 4) Set Of Connecting Hoses: Silicone Vacuum Hose, Hose Pressure Pvc, Pvc Pipe.