Tenders Are Invited For 23 22 2Cl 031 Single Underfloor Wheel Set Lathe For The Haltingen Plant, Db Regio Ag

23 22 2Cl 031 Single Underfloor Wheel Set Lathe For The Haltingen Plant, Db Regio Ag. A Cnc-Controlled Single Underfloor Wheel Set Lathe Is To Be Purchased For Db Regio Ag At The Haltingen Location (New Procurement/New Construction). This Publication Relates To The Production, Delivery, Assembly, Commissioning, Training, Trial Operation And Final Acceptance Of The Machine Including All Necessary Peripherals For The Haltingen Plant. The Machine Is Mainly Used To Measure And Process Wheel Sets From Db Regio Ag With A Standard Track Width Of 1,435 Mm (Mainly Regiolok Series And Et/Vt Series). The Single Underfloor Wheel Set Lathe Must Be Suitable For The Following Tasks/Functions: ► Automatic Measurement Of The Wheel Sets In At Least The Usual Wheel Set Dimensions A1, A2, D, ∆D, E, H, Qr, G And H ► Measurement/Processing Of The Wheel Sets When Installed Or As An Individual Wheel Set With Bearings/Bearing Housings O Wheel Sets Can Have Internal Or External Bearings And Can Sometimes Be Mechanically Coupled To One Another ► Automatic Reprofiling Of The Wheel Rims/Wheel Tread On Monoblock And Tire Wheel Discs With Profiles According To Din En 13715 Or Ril 984.0400 In Various Diameters And Widths As Well As: O Processing Of Wheel And Shaft Brake Discs (Tarpaulins) O Machining Of The Outer Wheel Rim Face And Re-Grooving Of The Identification Groove ► Proof Of The Compliant Condition Of The Wheel Sets After Processing With Regard To The Parameters D1.2, ∆D1.2, E1.2, H1.2, Qr1.2, H1.2, G1.2, A1 And A2 With A Measuring System According To Din 272019 ► Logging Of All Measured And Calculated Data In An Electronic Database (Machine-Internal Or Db-Hosted) Plus The Automated Transfer Option To The Internal Erp System (Sap Isi) ► Possibility Of Remote Maintenance Access Via “Secure Remote Maintenance” ► Output Of Defined Machine Information Via Opcua Interface ► Registration/Logout Of Operators Via Db Group Id Card And Assignment Of Appropriate Authorizations The Underfloor Wheel Set Lathe Must Be Designed With An Automatic Chip Disposal Device With A Chip Crusher, A Smoke And Dust Extraction System, A Hydraulic System And Other Functionally Necessary Peripherals In Accordance With Ce Conformity Using The Latest State-Of-The-Art Technology. The Primary Measuring Circle Diameter Range To Be Processed Is Between 580 Mm And 1,250 Mm. The Wheelset Shaft Length Including The Bearings/Bearing Housings Is A Maximum Of 2,600 Mm, The Axle Load Acting On The Machine Is A Maximum Of 250 Kn (Plus Any Hold-Down Forces That May Need To Be Applied).