Tenders Are Invited For Construction Of New Road Lighting Points

1. The Scope Of The Order Includes The Construction Of New Road Lighting Points (12 Pcs.):• Town Of Lipowiec - Plot No. 105 - Fixture - 1 Pc., Measurement.• Town Of Lipowiec - Plot No. 780 - Length Of The Asxs Line - 2 X 25 Mm2 – 51/53 M., Spun Pre-Stressed Concrete Pole - 1 Pc., Led Fixture - 1 Pc. • Gawrzyjalki Town - Plot No. 54/1, 54/2, 365 – Length Of Asxsn Line 2 X 25 Mm2 – 174/181 M. ., Yaky 4 X 25 Mm2 - 64/90 M., Line Length, Spun Prestressed Concrete Pole - 4 Pcs., Binding - 4 Pcs.;• Town Of Lipowa Góra Wschodnia - Plot No. 111/2, 114/8, 116/ 2, 113/1, 113/19, 113/20, 113/26, 113/30, 113/43, – Asxsn Line Length 2 X 25 Mm2 – 418.5/536 M, Yaky 4 X 25 Mm2 – 118/ 170 M., Spun Pre-Stressed Concrete Pole - 10 Pcs., Led Fixture - 10 Pcs.• Town Of Prusowy Borek - Plot No. 95/6 - Length Of The Asxsn Line - 2 X 25 Mm2 35/37 M., Length Of The Yaky Line 0.5/ 15 Meters Spun Pre-Stressed Concrete Pole - 1 Pc., Led Fixture - 1 Pc.• Town Of Dębówko - Plot No. 14/2 - Asxsn Line Length 2 X 25 Mm2 - 109/113 M, Spun Pre-Stressed Concrete Pole - 2 Pcs., Luminaire - 2 Pcs., • Szymany Town - Plot No. 360, 368, 400 - Yaky Line Length 4 X 25 Mm2 - 56/73 M., Asxsn Line Length 2 X 25 Mm2 - 25/27 M., Spun Prestressed Concrete Pole - 2 Pcs. ., Led Fixture - 2 Pcs. • Town Of Sędańsk - Plot No. 72 - Asxsn Line Length 2 X 25 Mm2 - 67/70 M, Yaky 4 X 25 Mm2 - 2/19 M, Spun Prestressed Concrete Poles - 2 Pcs. Luminaires - Led, 2 Pcs, Measurement. • Szymany Town - Plot No. 189/13, 356/2, 358/1, - Yaky Line Length 4 X 25 Mm2 - 517/562, 7 Pcs. Spun Prestressed Concrete Poles, 7 Pcs. . Led Fixtures, Measurement.• Town Korpele - Plot No. 59/6, 59/10, 61 - Asxsn Line Length 2 X 25 Mm2 91/95 M, 3 Pcs. Spun Prestressed Concrete Poles, 3 Pcs. Led Fixtures.• Town Lipowa Góra Wschodnia - Plot No. 131/14, 132/1 - Yaky Line Length 4 X 25 Mm2 - 40/57 M, Spun Pre-Stressed Concrete Pole - 1 Pc, Led Fixture - 1 Pc; • Town Of Szczycionek – Plot 83/8, 84/1 - Asxsnn Line Length 2 X Mm2 – 151/157 M, Spun Pre-Stressed Concrete Poles - 3 Pcs., Led Fixture - 3 Pcs.; A Detailed Description Of The Subject Of The Order Can Be Found In The Technical And Executive Designs - Construction Designs. The Order Also Includes Commissioning And Adjustment Of The Lighting Time According To The Ordering Partys Instructions After The Installation Of Measuring Devices By Energa. Technical And Operational Parameters Of The Installed Led Luminaires With A Power Of 35 W - Luminaire Housing (Body, Cover, Handle) Made Of Aluminum Alloy By Hot Pressure Injection, - Luminaire Equipped With Transparent Glass Protecting The Optical System Against Damage, Impact-Resistant, Tempered Flat Glass , - The Degree Of Tightness Should Be Ip66 For The Entire Luminaire, - Two-Chamber Luminaire (Opening The Equipment Chamber Does Not Result In Unsealing Of The Optical Chamber), - Luminaires Made In Class Ii Protection Against Electric Shock, - Mounting Bracket Should Enable Mounting The Luminaire On A Boom Or Directly On Pole With Position Adjustment -10 +10 Degrees, - The Total Actual Efficiency Of The Luminaire Should Be Min. 150 Lm/W, - Values ​​Of The Indicator Of The Share Of Light Sent Upwards (Ulor) In Accordance With Ec Regulation No. 245/2009, Ce Mark, - Led Color Temperature - 4000K, Luminous Flux 5609 Im, - Luminaires Equipped With Power Supply Systems Adapted For Operation Ac 230V-50Hz With A Power Supply Equipped With A Soft Start, The So-Called Soft Start (In The Range Of 5-10 Sec), - Current Supplying The Led Panel Max - 700 Ma With Dali Function, - Access To The Interior Of The Luminaire Without The Use Of Tools, And Replacement Of The Power Supply System And Led Panel Via The Network Also Without The Use Of Tools, - Declared Durability Of The Diodes Min. .100,000 Hours, - Led Panel Equipped With A Temperature Sensor Connected To The Power Supply To Protect Against Panel Overheating, - Luminaires Equipped With Overvoltage Protection Up To 10 Kv, Soft-Start Limiting The Starting Current, - The Warranty For The Luminaires Should Be At Least 5 Years, - Power Reduction To 5 Ranges, - For Operational Reasons, The Luminaires Should Be Able To Replace The Led Panel And Power Supply On The Lighting Line Without The Use Of Tools. When Executing The Order, The Contractor May Use Materials Or Devices From Any Manufacturer, Provided That These Materials And Devices Have Parameters Not Worse Than Those Described In The Tender Documentation, And In The Case Of Using A System, Technological System Solutions Or A Set Of Devices, They Will Come From One Manufacturer Or Be Authorized By One Manufacturer. Any Indication Of Specific Manufacturers, By Providing Company Names, Trademarks, Descriptions, Specified In The Documentation Provided To Contractors Along With The Swz, Should Be Treated As An Example Of Determining The Basic, Minimum Requirements, Parameters And Expectations Of The Ordering Party Relating To The Subject Of The Order. The Ordering Party Allows The Offer Of Equivalent Materials And Devices, Provided That They Guarantee Technical, Quality And Operational Parameters Not Worse Than Those Assumed In The Documentation, Subject To The Provisions Regarding The Reuse Of Materials, If Any. In Each Case When The Ordering Party Describes The Subject Of The Contract By Reference To Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems, It Allows Solutions Equivalent To Those Described. To Perform The Subject Of The Contract, The Contractor Is Obliged To Use Only Brand New Materials That Meet The Requirements Arising From Legal Provisions, Are Compliant With The Provisions On Testing And Certification, Approved For Use On The Basis Of The Provisions On Approvals And Technical Criteria And The Individual Use Of Construction Products And On The Basis Of The Provisions On Conformity Assessment Systems, The Declaration Of Conformity Template And The Method Of Marking Construction Products Approved For Trading And Common Use In Construction, As Well As Compliant With Subject Standards. Before Commencing The Works, The Contractor Is Obliged To Deliver The Fixture At His Own Expense In Order To Check The Compliance Of Its Parameters With The Description Of The Subject Of The Order And The Prepared Documentation. The Investors Supervision Inspector Will Check The Submitted Documents And The Provided Binding.