Detailed Description With Indication Of The Scope Of The Order: The Subject Of The Investment Are Construction Works Consisting In Adapting Existing Rooms In Part Of The Municipal Office Building To The Senior+ Club At Al. J. Pi sudskiego 41 22-200 W odawa Along With Their Equipment. The Works Include, Among Others: Replacement Of Floor Coverings, Installation Of New Anti-Slip Stoneware Floors In The Bathrooms, New Tiles On The Walls In The Bathrooms And An Apron On The Kitchen Furniture At A Height Of 80 Cm Above The Countertops, Replacement Of Doors In The Rooms And Installation Of New Aluminum Entrance Doors, Painting Of Walls And Ceilings, Implementation Of A Partially New Installation Electricity And Lighting Fixtures In The Rooms, Replacement Of Washbasins And Toilet Bowls In Toilets, Construction Of New Partition Walls With Plaster In The Cloakroom And Bathrooms, And Construction Of A Partially New Water And Sewage Installation. In Bathrooms And Kitchenettes. The Order Also Includes The Purchase, Delivery And Installation Along With Commissioning Of Equipment For Rooms Adapted For The Senior + Club. Order Address: Al. J. Pi sudskiego 41, 22-200 W odawa, Plot No. 567, 568, 569, 570, 571, Registration Unit: 061901_1, Registration District: 1-0001 W odawa. Main Scope Of Construction Works: 1. Demolition Works: Removing Steel Door Frames Or Window Grates From The Wall, Dismantling A Wall Made Of Blocks Or Slabs Of Aerated Concrete With Cement Mortar, Dismantling Floors Made Of Plastic Coverings - Tiles, Dismantling Floors Made Of Ceramic Tiles, Dismantling Tiles Ceramics, Carving Grooves In Gravel Concrete Elements 2. Masonry Works: Plasters, Cladding: Filling Brick Walls Or Filling Up Holes In Walls With Cement-Lime Mortar, Partition Walls, Ordinary Internal Plasters, Facing Walls With Adhesive Tiles - Preparing The Surface, Facing Walls With Adhesive Tiles Using The Usual Method, Manual Scraping Of Oil Paint, Priming The Substrates, Plastering, 3. Door Joinery: Installation Of Double-Leaf Aluminum Doors, Internally Glazed, Installation Of Solid Internal Doors With A Door Frame And One-Sided And Double-Sided Architraves, Installation Of Solid Internal Bathroom Doors 4 . Flooring Works: Leveling And Smoothing Layers, Plastic Carpet Floors, Vinyl With 10 Cm Wall Overlap, 2 Mm Homogeneous, Tile Floors Made Of Artificial Stones, 30 X 30 Cm Anti-Slip Tile Floors 5. Painting Works: Double Painting With Paints Emulsion Of Old Plasters Of Internal Walls 6. Water And Sewage Installation Works: Replacement Of Washbasins And Toilet Bowls, Partly New Water Installation. -Ch. In Bathrooms And Kitchenettes, Use Of Existing Water And Sewage Connections, Galvanized Pvc Sanitary Sewage Pipes For Water Installations 7. Electrical Installation Works: Disassembly Of The Existing Electrical Installation, Installation Of Flush-Mounted Cables, Preparation Of The Surface For Installation Accessories, Installation Of Installation Boxes, Socket Connectors Flush-Mounted Installations, Modular Equipment In Switchboards, Lighting Fixtures, Pictogram. 4.1.3. Construction Solutions: Demolition Works As Described In The Bill Of Quantities. 1.Interior Walls: All Designed Room Partition Walls, Made Of Aerated Concrete Blocks With A Thickness Of 12.0 Cm On Cement-Lime Mortar Class M5. 2. Chimney Ducts: Existing Ventilation Chimneys, 110 Cm Pipes Covered With Gkfi Boards. 1.25 Cm Under The Ceiling. Gravitational And Partially Forced Ventilation In The Rooms - See The Projections: Fans At The Grilles With Light Switching On Or A Motion Detector. 3.Windows And Doors: Door Joinery: Internal Board Doors With A Frame And A One-Sided Architrave At The Load-Bearing Walls And With A Double-Sided Architrave At The Colored Partition Walls. Internal As Cold Aluminum: Safety Laminated Glass - 1B1, With Door Closer. 4.1.4. Finishing 1. Internal Plasters: Internal Plasters Of Walls After Partition Walls And Additions - Abrasions After Demolition As Cement-Lime Category Iii. In The Sanitary Room - Tiles At A Height Of H = 210 Cm, A Tile Apron At The Kitchen Installation At A Width Of 80 Cm Between The Lower And Upper Or Lower Cabinets. Communication Rooms At A Height Of H=1.50 With Decorative Plaster. 2. Painting Works, Wall Coverings After Plastering Works, The Walls Above The Tiles And The Ceilings Should Be Painted Twice With E.G. Latex Or Emulsion Paint, After Preparing And Priming The Substrate. 3. Floors And Tiles Anti-Slip Tiles With System Adhesive And Plinths At A Height Of H = 10.0 Cm In Sanitary Rooms And Homogeneous Vinyl Floor Coverings With A Thickness Of 2.0 Mm With An Extension To The Walls At A Height Of H = 10.0 Cm. Self-Leveling Compounds For Floor Finishing In All Rooms. See Descriptions On The Room Plans. (Appendix No. 1 To Swz). Note: Materials That Are At Least Flame-Retardant, Including Floor Coverings, Are Designed For Interior Finishing And Permanent Furnishings. All Construction Works Should Be Performed Under The Supervision Of A Person Authorized To Manage And Supervise A Given Scope Of Works, In Accordance With The Principles Of Construction Practice And The Pn Standards In Question, The List Of Which Is Included In The Regulation Of The Minister Of Internal Affairs And Administration Of March 4, 1999/Journal Of Laws U. No. 22, Item 2091 And Based On The Health And Safety Plan To Prepare, Which The Contractor Is Obliged To Prepare Under The Construction Law, The Regulation Of The Minister Of Infrastructure Of August 27, 2002, And In Accordance With The Project. All Materials Built Into The Facility Must Have: - Technical Approval, - Mandatory Certificate Of Conformity And Marking With The B Safety Sign Or Voluntary Certificate Of Conformity And Marking With Assigned Marks (Pn, E, Q) Or A Declaration Of Compliance With Applicable Regulations And Polish Standards And Technical Approval. All Construction Works Should Be Carried Out Under Professional Supervision. When Performing Construction Works, Comply With The Technical Instructions Provided By The Manufacturer And Compliance With Polish Standards. Occupational Health And Safety And Fire Protection Regulations Must Be Observed. Any Material Changes In Consultation With The Designer And The Investor. List Of Room Equipment: 1. Cloakroom Room: - Wall Hangers On Laminated Board - For 14 Seats With Seats Made Of Laminated Boards On A Painted Steel Frame - For 7 Seats. 2. Common Room - Meeting Room: - Corner Sofa Upholstered With Fabric Without Sleeping Function, Length L = 3.0 M And Width B = 2.0 M, Pieces = 1 (Dimensions +/- 2 Cm) - Eared Armchair Upholstered With Fabric, Pieces = 2, Height 103 Cm, Width: 85 Cm, Depth 92 Cm (Dimensions +/- 2 Cm) - Round Table - Diameter 60 Cm And Diameter 80 Cm, On A Painted Steel Frame, Top Made Of Double-Sided Laminated Boards, Pieces = 2, (Dimensions +/-2Cm)- Table On A Painted Steel Frame, Top Made Of Double-Sided Laminated Boards -120X80cm, Pieces=6, (Dimensions +/-2Cm)- Wall Unit Made Of Laminated Board, Lower Cabinets Pieces=4, Two Vertical Posts On Both Sides . Wall Unit With Total Length - L = 4.0 M, (Dimensions +/- 2 Cm) - Table Chair With Upholstered Fabric Seat With Backrest, Material Resistant To Damage And Dirt, Legs Made Of Steel, Dimensions: Height 82 Cm, Width: 51 Cm (Dimensions +/- 2 Cm) The Chairs Should Be Matched To The Table On A Painted Steel Frame (Item 4) Pieces = 14,- Led Tv As A Standing Or Wall-Hanging One With An Adjustable Bracket (Min., 2X Hdmi Sockets, 1X Usb , Screen: 58 Led, Uhd/4K, Min. 3840 X 2160Px, Screen Refresh Rate: Min. 60 Hz, Smart Tv, Dvb-C, Dvb-S2, Dvb-T2 Tuner, Housing Color Black), Pcs=1 , - Computer Set With Software And Monitor, Pieces = 1, (The Computer And Monitor Must Be Brand New, Post-Lease And Previously Used Equipment Will Be Rejected) Minimum Technical Parameters Of The Workstation: 1. The Computer Set Must Be Intended For Office Use.2. A Multi-Core Processor Integrated With The Graphics System Achieving A Score Of At Least 10,000 Points In The Cpu Passmark Performance Test (Https://Www.Cpubenchmark.Net) With The Result Valid As Of The Date Of Submission. The Ordering Party Requests The Submission Of A Document Confirming That The Offered Processor Meets The Performance Required By The Ordering Party At The Stage Of The Acceptance Procedure.3. Working Memory Min. 16 Gb In The Latest Technology Offered By The Computer Manufacturer, And The Computer Must Have At Least 1 Unoccupied Expansion Slot And Support Up To 32Gb Memory.4. Mass Storage Ssd M.2 Nvme Drive Min. 250 Gb.5. Integrated Graphics Card With The Ability To Dynamically Allocate Memory Within The System Memory.6. The Integrated Sound Card Must Support 24Bit Hd.7 Audio. The Housing Must Provide Direct Connection Of At Least Two Usb Devices And A Microphone On The Front, And The Total Size Of The Housing (Width + Height + Depth) Cannot Exceed 80 Cm.8. The Computer Must Be Equipped With An Internal Power Supply With A Maximum Power Not Exceeding 250 W.9. Tpm2.0.10 Module. Minimum Equipment: Non-Removable 1Xdp Or 1Xhdmi; Non-Removable At Least 5 Usb Ports, Including At Least 2 X Usb 3.0 On The Front Panel Of The Computer, Dvdrw Optical Drive; Usb Keyboard In Polish Programmers Layout And Wireless Mouse (Two-Button, Roller/Scroll As The Third Button); Media With Operating System And Drivers; Speaker, 1X Headphone Output And 1X Microphone Input On The Front Panel Of The Housing (One Common Headphone And Microphone Connector Is Allowed), 10/100/1000 Mbit/S Ethernet Rj 45 Network Card Supporting Wol Support. Due To The Limited Number Of Characters, Other Information Regarding . Of The Subject Of The Order Are Included In Chapter 4 Of The Swz And In The Annex. No. 1 To Swz.
