Bids Are Invited For Acquisition Of School Furniture

Student Set Size 06 Standard Fnde: Table: Sides And Book Holder Support Made From 29X58mm Oblong Section Steel Tube On 16(1.5Mm) Plate. Upper Beam For Fixing The Top Made Of Steel Tube With Circular Section 31.75Mm (1¼) Plate 16 (1.5Mm). Feet In Circular Section Steel Tube 38Mm (1½) In Plate 16 (1.5Mm). Closing With Injected Polypropylene Tips And Shoes In Blue, Fixed To The Structure Using 4.8X16mm Diameter Snap Rivets. Injected Parts Must Not Have Burrs, Injection Flaws Or Sharp Parts. Anti-Ferruginous Treatment Must Be Applied To Metal Parts To Ensure Resistance To Corrosion. Welding Must Have A Smooth And Homogeneous Surface And Must Not Have Sharp Points, Rough Surfaces Or Slag. All Pipe Abutments Must Be Welded Around The Entire Perimeter Of The Union. Spatters Or Welding Irregularities, Burrs And Sharp Corners Must Be Eliminated. Top (600X450mm) In 18Mm Thick Particleboard Wood (Mdp) Covered On The Upper Face In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish In Gray And Covered On The Lower Face In Balancing Plate - Against Phenolic Plate Of 0.6Mm. Application Of Claw Nuts With Metric M6 Thread And 10Mm Length. Pvc Maple Tapes With Primer, Textured Finish In Blue Color Glued With Hot Melting Adhesive, Nominal Dimensions Of 22Mm (Width) X 2.5Mm (Thickness). Rounded Corners. Fixing The Top To The Structure Using 06 M6 Metric Thread Clamp Nuts (Diameter 6Mm), 06 M6 Metric Thread Screws (6Mm Diameter), Length 47Mm Philips Pan Head. Book Holder (503X304mm) In Injected Polypropylene In Gray Color. Fixing The Book Holder To The Longitudinal Structure Using Fountain Rivets. Painting Of Metallic Elements With Hybrid Epoxy Powder Paint, Bright Electrostatic, Polymerized In An Oven, Minimum Thickness Of 40 Microns In Color... (As Per Public Notice), Student Set Size 04 Standard Fnde: Table: Sides And Book Holder Support Made In Oblong Section Steel Tube 29X58mm In Plate 16 (1.5Mm). Closing With Injected Polypropylene Tips And Shoes In Red Color, Injection Flaws Or Cutting Parts. Anti-Ferruginous Treatment Must Be Applied To Metal Parts To Ensure Resistance To Corrosion In A Salt Spray Chamber. Welding Must Have A Smooth And Homogeneous Surface, Textured Finish In Red Color Glued With Hot Melting Adhesive, And... (According To Notice), Student Set Size 03 Standard Fnde: Table: Sides And Book Holder Support Made Of Oblong Section Steel Tube 29X58mm On Plate 16 (1.5Mm). Closing With Injected Polypropylene Tips And Shoes In Yellow Color, Textured Finish In Yellow Color Glued With Hot Melting Adhesive, 06 M6 Metric Thread Screws (Diameter 6Mm), Special... (As Per Notice), Childrens Dining Room Set, Consisting Of A Table And Four Standard Chairs Fnde: Table: Structure With Feet In 1 1/2 Steel Tube In Plate 16 (1.5Mm). Longitudinal Beam In 40X40mm Steel Tube In Sheet 16 (1.5Mm). Cross Beams In Rectangular Section Tube 20X50mm In Sheet 16 (1.5Mm). Structural And Fixing Supports For The Top In 3Mm Thick Steel Sheet. Top Fixing Fins In Sheet Steel 14 (1.9Mm). Fixing The Top To The Structures Using 2 Screws 4.5X50 Fh Flat Gold And Chipboard Screws, 4.5Mm X 22Mm, Pan Head,