Tenders Are Invited For Renovation Of Systems And Equipment Of The Vehicle Wash Wash In Knw At Ul. Sikorskiego In Braniewo

For The Task: Renovation Of Systems And Equipment Of The Motor Vehicle Wash At Knw At Sikorskiego Street In Braniewo. The Subject Of The Order Is The Technical Improvement Of Devices In Motor Vehicle Wash Systems, Including The Replacement Of Elements Of The Ow 250 System And Devices Requiring Coagulant Feeding To The Depression System Based On Sedimentation. 1. Location: The Car Wash For Tracked And Wheeled Vehicles Is Located On The Premises Of Jw, Knw, At Ul. Sikorskiego 41 In Braniewo. It Is Equipped With Control Panels, Pressure Fittings, Solenoid Valves, Separators, Rinsing System, Water Purification System For Reuse, Alarm Devices, Nozzles, Repurification System And Other Devices Specified Below.2. Scope Of Works: Replacement And Repair Of Damaged Elements And Car Wash Systems In The 1.0 M Pa And 03 M Pa Operation System: Nozzles: - Delivery And Installation Of Nfd Type Nozzles, 5 Pieces, - Delivery And Keeping As A Spare Nfd Type Nozzles, 2 Pieces – Delivery And Installation Of St Type Nozzles, 9 Pieces, – Delivery And Keeping 5 St Type Nozzles As A Spare, – Removal Of Leaks In The Compressor Distributor Solenoid Valve, – Delivery And Installation;  Process Water Pipeline 0.3 Mpa And 1.0 Mpa In The Sk Pump System; – Repair Of Dn 15 Injection Branches On The Dn 80 Pipeline By Hot Straightening With A Burner, 4 Pieces,  Control Panel For Both Vehicle Washing Systems; – Delivery And Replacement Of The Control Panel Of The Main Control Room Of Both Systems In Accordance With Applicable Safety Standards  Sk 6.05 Type Pumps In The 1.0 Mpa Process Water System - Delivery And Replacement Of Sk 6.05 Type Pumps, 5 Pcs. (Only Pumps Without Electric Motors), Including Rolling Bearings And Pump Shaft ; Air Compressors - Compressor Units - Repair Of The Compressor Distributor Solenoid Valve, Pcs. 1 - Installation Of Compressor Dryers, Pcs. 2 - Oil Change In Compressor Units, Pcs. 4 - Replacement Of Drive Belts On Engines, Set. 4 (8 Pcs.) Control Cabinet; - Modernization And Replacement Of B-Z, Ks Kc Ka-Z Controllers In 1.0 Mpa And 0.3 Mpa Systems;  Process Water Pre-Treatment System (Ow 250): Dismantling And Disposal – Hydrocyclone Installation - 3 Pcs. Ow 250, – Hydrocyclones – Coagulant Dosing System, – Coagulant Dosing Pump, – Coagulant Tank, – Filter Inserts In Partition Tanks, 3 Pcs – Basket Float With A Mesh For Water Intake For Secondary Use In A Steel Sludge Tank Located Outside The Building. Installation Of A Closed-Circuit Water Pre-Treatment System Using The Sedimentation Method: - 5-7 M3 Tank With A Preliminary Sieve, - Sedimentation Tanks With A Capacity Of Approx. 10 M³ (2 X 5 M3, Or 3 X 3 M3), - Screw Screening Or Carded Belt Selector With A Screen, - Full Internal System Equipment With Level Sensors,  Checking The Correct Operation Of All Process Control Elements Of The Car Wash Automation System, - Checking The Tightness Of Connections, Checking The Closure Of Quick Connectors , Straight-Through Shut-Off Valves (Including External Ones) Fi 25 Draw-Off Valves, Checking The Correct Operation Of The Entire System.