Request For Quotation High Pressure Fuel Pump Testing And Repair Stand

High Pressure Fuel Pump Testing And Repair Stand: • 1. The Stand Is Designed For Diagnosing And Adjusting All Mechanical Injection Pumps Of In-Line, V-Shaped And Distribution Type, Russian And Foreign Production. • The Fuel Injection Pump Adjustment Stand Is Designed For Adjusting And Testing Fuel Injection Pumps With A Cyclic Flow Of Up To 250 Mm³. Used For Testing Fuel Injection Pumps From The Following Manufacturers: Yamz (Yaroslavl Motor Plant), Kamaz, Yazda (Yaroslavl Diesel Equipment Plant), Yazta (Yaroslavl Fuel Equipment Plant), Tmz (Tutaevsky Motor Plant), Azpi (Altai Precision Products Plant), Nzti (Noginsk Fuel Equipment Plant), Bosch, Zexel, Lucas, Denso And Others. This Type Of Equipment Can Be Used To Repair Injection Pumps Of Any Equipment: Cars, Trucks And Tractors, Dump Trucks, Special Equipment, Agricultural Machines And Tractors. •Specifications: • 1.Type - Stationary; 2. The Number Of Simultaneously Tested High-Pressure Sections Is 12; 3.Weight, Kg - No More Than 700 Kg; 4.Number Of Service Personnel, People. - 1; Value Reproduction Range: 1.Drive Shaft Rotation Speed, Min • - 0…4000; 2. Counting The Number Of Cycles, Cycle - 50…9999; 3 Cyclic Fuel Supply, Mm³/Cycle -0…250; 4. Fuel Temperature, ˚С - 20…45; 5. Angles Of The Start Of Fuel Injection (Injection), Degrees - 0…360; 6. Angles Of Rotation Of The Coupling Halves Of The Automatic Fuel Injection Advance Clutch, Degrees - 10…0…10; 7. Vacuum In The Pneumatic System, Mmhg. • - 0-760; 8. Measuring The Feed Start Angle, º - 0-360; 9. Phasing Pressure, Bar - 0-60; 10. Fuel Pressure, Mpa - 0…4; 11. Air Pressure, Bar - 0…2.5; 12. Kgf/Cm² - 0…2; 13. Volume Of Sta Fuel Measuring Vessels, Mm³ - 44/260. • Gost 26899-86