Request For Quotation Purchase Of A Street Simulator

Frame (Stand) It Is Made Of A Pipe With A Diameter Of 100 * 100 Mm, On The Main Rack There Are Handles Made Of A Bent Pipe With A Diameter Of 32 Mm. For Connection With The Base In The Lower Part Of The Frame There Is A Flange Made Of A Steel Plate 200X200 Mm With A Thickness Of At Least 5 Mm, The Metal Has Smooth Radii, Careful Processing Of The Seams, Covered With Powder Paint. Plastic Handles Are Put On The Hand Supports. The Top Of The Rack Is Closed With A Plastic Hemispherical Plug. Frame Dimensions 213X760x1450mm. Suspension Made Of Steel Profile 30X30 Mm And 80X40 Mm And Bushing. The Suspension Is Connected To The Rack With A Hinge Assembly. The Swivel Assembly Is Equipped With Bearing 180503/Gpz. Suspension Painted With Powder Paint - 2 Pieces. Support For Legs - Foot, Size - 330X145 Mm. Made From Plastic. A “Wave” Protector Is Provided On The Surface Of The Footshoe, Which Prevents Slipping - 2 Pieces. The Base Is Universal It Is Made Of A Steel Pipe With A Diameter Of At Least 89 Mm, A Length Of 500 Mm And Three Pipes With An Outer Diameter Of 32 Mm With A Wall Thickness Of At Least 2.8 Mm, The Pipes Are Bent, The Inner Angle Is 30 Degrees And Welded To The Central Pipe. In The Upper Part Of The Base There Is A Flange Made Of Sheet Steel 200X200, At Least 5 Mm Thick, M10.30Gost 15589-70 Bolts Are Welded Into The Flange Holes - 4 Pcs. For Connection With The Upper Frame. Base Size 750X650x500 Mm-1 Pieces. Safety Zone, Mm 2000X2000 Length, Mm 645 Width, Mm 760 Height, Mm 1500 Weight, Kg 53.7 Volume, M3 0.87, 170 000.00, 155 000.00, 325 000.00