Bids Are Invited For Registration Of The Consigned Price In Minutes For Future And Eventual Acquisition With Installment Delivery, Of Furniture Intended For The School Units Of This Municipality.

Steel Wardrobe: Steel Wardrobe With 16 Doors, Divided Vertically Into 4 Compartments By Means Of Partitions With Independent Pivoting Doors And A Vertical Axis, Equipped With Fixed Internal Partitions. Depth: 450Mm; Height: Up To 1930Mm; Body, Partitions, Door, Shelves And Reinforcement In Cold Rolled Steel Sheet - Plate 22. Base In Cold Rolled Steel Sheet - Plate 14. Door Locking Bars Ø = 1/4” (Minimum). Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Sheet - Sheet 20 With A Minimum Of 75 Mm In Height - Two Units Per Door. Fully Metal Handle And Canopy, With Locking. Recessed Cylindrical Barrel Lock With Minimum 4 Pins. Duplicate Keys Attached To Corresponding Doors. Powder Paint Finish. Shelves With Triple Folds On The Front And Bottom Edges: 1St Fold - Minimum 20 Mm / 2Nd Fold - Minimum 10 Mm / 3Rd Fold - Minimum 6 Mm. Simple Side Folds - Minimum 20 Mm. Doors With Triple Folds Around The Entire Perimeter: 1St Fold - Minimum 20 Mm / 2Nd Fold - Minimum 15 Mm / 3Rd Fold 180° With 6 Mm. Base With Triple Folds, 1St Fold - Minimum 20 Mm / 2Nd Fold - Minimum 15 Mm/ 3Rd Fold - Minimum 10 Mm, Welded To The Body With A Minimum Of 10 Evenly Spaced Welding Points. Sheet Metal Joints At The Corners Are Filled With Weld. Doors Fixed Using Built-In Hinges And Welded Shelves Adjustable Using Vertical Profiles That Allow Adjustment At Distances Of 100 To 100 Mm. Holes Or Screws Not Visible On The Outside Of The Furniture. Welds With A Smooth And Homogeneous Surface, Without Sharp Points, Rough Surfaces Or Slag. Catmat: 483429. The Bidder Must Present Along With The Price Proposal: - The Service Certificate For The Preparation And Painting Process On Metallic Surfaces In Accordance With Certification Model 6, Which Complies With The Pin Prp 032 Process And The Astm D 3359, Astm D Standards 523, Astm D 7091, Astm D 2794, Astm D 3363, Abnt Nbr 11003, Abnt Nbr 8095, Abnt Nbr 8094, Abnt Nbr 8096, Abnt Nbr 9209, , Carbon Steel Cabinet With Two Pivoting Doors, Equipped With Handle And Keys (Two), Three Hinges Per Door, Cremona System, Equipped With 4 Removable And Adjustable Shelves; Dimensions And Tolerances: Depth: 450Mm; Height: 1980 Mm; Width: 900Mm; Tolerances For Paint Layer: Minimum 40 Micrometers. Characteristics: Body, Shelves And Reinforcement In Cold Rolled Steel Sheet - Plate 22. Base In Cold Rolled Steel Sheet - Plate 14. Door Locking Bars Ø = 1/4” (Minimum). Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Sheet - 20 Sheet (0.95 Mm) With A Minimum Of 75 Mm In Height - Three Units Per Door. Fully Metal Handle And Canopy, With Cremona System Locking. Cylindrical Barrel Lock Built Into The Handle With A Minimum Of 4 Pins. Duplicate Keys Attached To Corresponding Knob. Powder Paint Finish. Shelves With Double Folds On The Front And Bottom Edges. Doors With Double Folds Around The Entire Perimeter: 1St Fold - Minimum 20 Mm / 2Nd Fold - Minimum 15 Mm. Base With Double Folds, 1St Fold - Minimum 20 Mm / 2Nd Fold - Minimum 15 Mm, Welded To The Body With A Minimum Of 10 Evenly Spaced Welding Points. Sheet Metal Joints At The Corners Are Filled With Weld. Doors Fixed Using Built-In Hinges And Welded Adjustable Shelves Using Vertical Profiles That Allow Adjustment. Non-Visible Holes Or Screws