Bids Are Invited For Hiring Of A Specialized Company Aiming At The Supply And Installation Of Playgrounds And Other Toys To Compose The Leisure Area Of ​​The Cmeis And Other Municipal School Entities.

Playground – Model 1In Rotomolded Polyethylene2 Modules In Hexagonal Format, Each With 2 Walls In V And Contains: Upper Part In Castle Shape; Wall With Upper Part In The Shape Of A Castle; Elevator Door With Viewfinder At The Top Operated By Cord; 1 Plastic Piece In The Shape Of A Protection Arch; 1 Small Straight Slide R 1 Small Curved Slide R 1 Small Climb; 1 Arch; 1 Basketball Backboard With Backboard And Hoop; 1 Internal Half Platform With Drains To Prevent Water Accumulation And Non-Slip Details; Piece With 1 Step That Works As Support And As Access To The Half Platform; From Jatinho; Openings In The Lower Part Of The Modules, Allowing Passage On The 6 Sides Of The Toy. Own Places For Fixing To The Floor, If Necessary. Packaging In Resistant Plastic Approximate Dimensions: 3, 25 X 4, 95 X 1, 48 (Wxwxh), Tolerance Of 5% Abnt Nbr Nm 300-1:2004 Standards - Toy Safety / General, Mechanical And Physical Properties. Abnt Nbr Nm Standard 300-2:2004 - Toy Safety/Inflammability.Norma Abnt Iso/Tr 8124-8:2015 -Guidelines Age Rangecertified By Inmetro, With 1 Year Warranty By The Manufacturer Against Manufacturing Defect.The Product Must Contain An Instruction Manual In Portuguese For Assembly, Installation And Use Of The Toy(Illustrative Image)., Playground – Model 2Playground Made Of Rotomolded Polyethylene With Uv1 Additive Hexagonal Platform With Drains 1 Climbing Ramp With Leaked Holes For Foot Support And Space For Only 1 Child To Pass 1 Curved Slide Supported By 1 Threaded Post 1 Wall With Attached Protection Arch And Lower Entry/Exit Holes 1 Wall With Upper Vertical Holes And Lower Entry/Exit Holes 1 Guardrail With Attached Tiller 4 Fences Closing The Lower Sides 1 E-Going Door -Comes Installed In One Of The Lower Passages1 Piece With Sink, Stove, Dish Drainer Installed In One Of The Lower Passages Next To The Fencing4 Awnings Installed Over Each Of The Lower Openingsplastic Structure Attached To One Of The Sides, With A Swing In The Shape Of A Jet And Piece In Form Of Helms Own Locations For Fixing To The Floor, If Necessary. Packaging In Resistant Plasticapproximate Dimensions: 2.65 X 1.85 X 3.25 (Lxxp), Mechanical And Physical.Norma Abnt Nbr Nm 300-2:2004 – Toy Safety/Inflammability Norm Abnt Iso/Tr 8124-8:2015 – Guidelines Age Group Certified By Inmetro, Playground – Model 3Playground Made Of Rotomolded Polyethylene With Uv Additive1 High Module With Platform With Non-Slip Texture And Drains 1 Low Module In Hexagonal Format Without Platform; 1 Climbing Ramp With Holes And Protrusions For Foot Support And Space For Only 01 Children To Pass At A Time 1 Curved Slide With Support Post, Containing Thread On The Post And On The Ramp, For Secure Attachment; 1 Small Slide; 1 Ladder Between Levels With 2 Handrails And 4 Steps, 2 Steps In The Small Module, For Access To The Slide And The Ladder Between Levels; 1 Protector With Piece In The Shape Of A Tiller Installed In The High Module; 4 Security Arches; 2 Rooftops 1 Basketball Hoop. Own Places For Floor Fixing, If Necessary. Packaging In Resistant Plastic Approximate Dimensions: 5.55 X 2.70 X 2.55 (Lxwxh), Double Childrens Seesaw Made In Plastic