Request For Quotation 01. Goods For Fire And Security Alarms (Department 404) 397

Iae. Fire And Security Control Panel Number Of Radial Non-Address Alarm Loops (Al) 20. The Maximum Resistance Of The Al Wires Without Taking Into Account The Final Resistance Is Up To 1 Kohm. Permissible Leakage Resistance Between The Al Wires Or Each Wire And The Ground Is Up To 50 Kohm. Devices Connected To The Alarm Loop: Conventional Security And Fire Detectors With Relay Output Without Restrictions. Non-Address Security Detectors Powered By Al, The Total Consumption Current Of The Detectors In One Al Is Up To 1.2 Ma. Conventional Fire Detectors Powered By Al Total Current Consumption Of Detectors For One Type 1 Al - Up To 1.2 Ma; The Total Current Consumption Of The Detectors For One Loop Type 2 - Up To 1.2 Ma. The Voltage At Each Al Input Is 24 V ÷ 19 V With The Installed Terminating Resistor 4.7 Kohm ± 5% And The Current Consumption Of The Detectors 0 ÷ 3 Ma, 27 ± 0.5 V In Case Of Al Break. Current Limitation In A Short-Circuited Loop 26.5 Ma (No More Than 20 Ma Through A Triggered Detector, When The Detector Voltage Is More Than 6.8 V). Light Indication 20 Status Indicators For Each Of The Als 3 Status Indicators For Outputs 1 Indicator For Displaying Device Modes. The Built-In Sound Signaling Device Is. The Sensor Of Opening Of The Case The Microswitch. Rs-485 Interface, Orion Protocol. Power Supply Of The Device 10.2 ÷ 28.0 V From An External Dc Source. Current Consumption In Standby Mode At A Voltage Of 12/24 V 200 - 300 / 400 - 600 Ma. Current Consumption In The Fire Mode At A Voltage Of 12/24 V 330/650 Ma. Electromagnetic Relays (Dry Contact) 3 Pcs.: 28 V - 2 A Or 80 V - From 0.1 Ma To 50 Ma. Electromagnetic Relays (Dry Contact) 2 Pcs.: 28 V - 2 A Dc Or 120 V - 2 A Ac. Operating Temperature Range From Minus 30 To 50°С. Connecting To A Pc Via Rs-485 Interface Using An Interface Converter. St Rk 51089-2003. Passport. Certificate