Tenders Are Invited For Delivery Of A Brand New Specialist Car (Garbage Truck) For The Collection And Transport Of Municipal Waste Financed In The Form Of Operating Leasing With The Option Of Purchase.

1) The Subject Of The Contract Is The Delivery Of A Brand New Specialist Car (Garbage Truck) For The Collection And Transport Of Municipal Waste (Manufactured Not Earlier Than In 2023) Financed In The Form Of An Operating Lease With A Purchase Option. 3) Required Technical Parameters And Construction Features: Chassis: 1) Chassis Type: Three-Axle In 6X2 Axle Configuration With Trailing Axle2) Electro-Hydraulically Steered Trailing Axle3) Wheelbase Max. 3500 Mm4) Permissible Total Weight Min. 26,000 Kg,5) Minimum Technical Load Capacity Of The Front Suspension Min. 8000 Kg,6) Minimum Technical Load Capacity Of The Rear Bogie Suspension Min. 21,000 Kg,7) Minimum Technical Load Capacity Of The Trailing Axle, Min. 8,000 Kg8) Front Suspension - Reinforced 3-Leaf Parabolic Springs, 9) Rear Suspension - Pneumatic,10) Engine With Min. 320 Hp And Max. Torque Min. 1600 Nm11) Euro 6 Emission Standard12) Engine Capacity From 9000 Cm3 To 10900 Cm313) Automatic Or Automatic Gearbox With Hydrokinetic Clutch,14) Anti-Rollback System, So-Called Hill-Hold Or Equivalent15) Engine Power Take-Off, Clutch-Independent - Torque Available While Driving And Stationary,16) Led Daytime Running Lights,17) Three-Seat Day Cab18) Cab Color White19) Cab Suspension Pneumatic,20 ) Rubber Floor Mats, 21) Steering Wheel On The Left Side With Adjustable Position, 22) Heated And Electrically Adjustable Rear-View Mirrors, Right And Left, As Well As Heated Ramp (Front) And Curb Mirrors, 23) Electrically Operated Windows For The Drivers And Passengers Doors, 24) Windows Thermal, Front And Side,25) Abs, Ebs, Esp Systems26) Front Collision Warning System With Emergency Braking,27) Hands-Free Kit With The Possibility Of Connecting A Phone Via Bluetooth28) Factory Immobilizer,29) Central Locking With Remote Control30) Manual Or Automatic Air Conditioning31 ) Alternator 24V, Min. 100 A32) Heated Fuel Filter,33) 2 Batteries Min. 180 Ah,34) Digital Tachograph With Legalization And Calibration After Registering The Vehicle,35) Exhaust System Directed Upwards Over The Bodywork Or Lower Exhaust,36) Disc Brakes On The Front And Rear Axles,37) Steel Rims With Tires In Size 315/80 R22 .5 Load Capacity Adapted To The Maximum Technical Load Capacity Of The Chassis Axle.38) Steel Or Aluminum Fuel Tank, Min. 200 Liters,39) Adblue Tank, Min. 45 L,40) Rear Axle Differential Lock,41) Min. 42) Front Towing Hitch, 43) Display With On-Board Computer In Polish Language, 44) Side Factory Anti-Bike Shields, 45) First Aid Kit, 46) Adaptive Output For Connecting A Gps Device, 47) Warning Triangle, Fire Extinguisher, Cpl. Wrenches With A Jack Of Min 10 Tons, 48) 12V- And 24V Socket In The Cabin 49) Spare Wheel, Front Axle (Included Loosely), 50) Cable For Pumping Wheels, 51) Led Light Bar On The Cabin With The Inscription Pgkim Zom Jarosław. The Final Inscription To Be Agreed With The Employer By Way Of Arrangements At The Delivery Stage. Construction: 1) Oval-Shaped Body Loading Box 2) Fully Welded, Tight Loading Box 3) Total Length Of The Completed Vehicle Not More Than 8600 Mm 4) Length Of The Rear Overhang Of The Completed Vehicle, I.E. From The Center Of The Last Axle Of The Vehicle To The Extreme Rear Element Of The Vehicle Max. 2500 Mm. 4Mm, Made Of Uniform Sheets6) Oval-Shaped Loading Box Floor7) Loading Box Floor Made Of Structural Sheet Metal With A Thickness Of Min. 4 Mm8) Load Box Capacity Min. 19.5 M3, Without Taking Into Account The Volume Of The Tailgate9) Volume Of The Tailgate Charging Hopper Min. 1.8 M310) Drain Connection In The Loading Tub With A Ball Valve11) The Bottom Of The Loading Tub Is Made Of Hardox 450 Wear-Resistant Sheet Or Equivalent, Min. 10 Mm12) Side Walls Of The Bottom Of The Loading Vat Are Made Of Hardox 450 Wear-Resistant Sheet Or Equivalent, Min. 4 Mm13) Maintenance Hatch Located On The Right Side, With Protection In Accordance With En1501-1; 14) Lock And Bolt Of The Maintenance Hatch In The Anti-Corrosion Protection Technology - Galvanized 17) Tight Connection Of The Door Body With The Loading Box, Seals With Two Sealing Edges Are Required Between The Door Body And The Box. 18) Control Of The Press Loading Mechanism In Automatic, Continuous And Single Cycle19) Control Of The Pushing Plate (Extending And Retracting) From The Drivers Cabin.20) Release System Jammed Objects21) A Minimum Of Two Safety Switches (Emergency Stop) Located On Both Sides Of The Superstructure, One Safety Switch In The Drivers Cabin22) Minimum Waste Compaction Ratio 1:523) Protection Against Hose Rupture, Which In The Event Of A Pressure Drop With The Tailgate Raised, Prevents The Tailgate From Falling Rapidly24 ) After Lifting The Tailgate, It Is Required To Complete An Automatic Complete Cycle Of The Press Loading Mechanism In Order To Remove Any Residual Waste From The Hopper. Selection Of The Type Of Collected Waste (Glass, Bio, Waste Paper, Municipal Waste, Plastic), Opening And Emptying The Body 26) Monitor With A Camera To Observe The Coin Validators Working Field. 27) Tilting Edge Of The Filling For Easy Insertion Of Bags, 28) Folding Slide In A Steel Structure 29 ) Open-Type Coin Mechanism For Mgb Containers Compliant With The Pn-En 840 Standard And 110 L Containers;30) Hydraulic Clamp For Locking The Comb And Cam Plate 31) Comb Collecting Strip For 2- And 4-Wheel Containers (Mgb) From 80 L To 1100 L32) Cycle Time For Mgb 120-240 L Containers: Up To 8 Seconds, For Mgb 1100 L 4-Wheel Containers: Up To 12 Seconds According To Din35) The Bodywork Is Primed And Varnished Twice In White Color Corresponding To The Color Of The Chassis Cabin36) Road Lighting In Accordance With The Currently Applicable Road Traffic Regulations37) Rooster Alarm Light At The Front And Rear Of The Bodywork38) Additional Lighting Behind The Drivers Cabin Illuminating The Working Area From The Sides Vehicle39) Two Steps For Loaders With Sensors Informing The Driver About Their Occupancy And, In The Event Of Occupancy, Enabling: A) Limitation Of Forward Speed To 30 Km/H B) Preventing The Vehicle From Reversing C) Blockade Of The Kneading System40) Central Lubrication System For The Body And The Charging Device. 41) Outlet Connection In The Charging Tub, With A Drain Cock For Removing Liquid Leachate42) The Construction Is Made In Accordance With The Current Standards, Including En 1501-143) The Construction Has The Ce 799 Declaration Of Conformity4) A Container With Water For Washing Hands With A Dispenser For A Disinfectant Liquid45) The Bodywork Is Made In Accordance With The Pn-En 1501-1 Standard And Must Have The Ce Mark. 4) Other Provisions - Documents, Warranty, Warranty And Post-Warranty Service, Additional Conditions By The Contractor, Subject To The Following Provisions: 1) Leasing Period: 60 Months. 2) Initial Fee - Initial Payment In The Amount Of 10% Of The Net Value Of The Leased Asset, Payable Before The Conclusion Of The Contract On The Basis Of Transfer Details Specified By The Contractor Resulting From The Leasing Contract. 4) Handling Fee - 0% 5) Number Of Leasing Installments: 59 6) The Leasing Interest Rate Will Be Variable Throughout The Leasing Period Based On The Wibor 1M Interbank Market Interest Rate.