1) The Subject Of The Contract Is The Operation Of Road Lighting Devices In The City Of Wa brzych In The Area Of The Following Housing Estates: Piaskowa G ra, Podzamcze, Szczawienko And Lubiech w, In The Amount Of Approximately 2651 Points. 2) All Materials And Equipment Necessary To Perform The Subject Of The Contract Will Be Provided By The Contractor. 3) The Contractor Is Obliged To Have The Necessary Stock Of Spare Parts To Enable The Liquidation Of Failures In Street Lighting Devices. 2022.699 As Amended). 5) As Part Of The Contract, The Contractor Will Be Obliged To Create A Road Lighting Emergency Service Available 24 Hours A Day (Applies To Emergency Cases). 6) The Contractor Selected To Provide The Service For The Operation Of Road Lighting Devices Is Responsible For The Technical Condition And Safe Operation Of All Lighting Devices Installed In This Area And Bears All Consequences For Failure To Meet The Above Requirements, Including Legal Consequences In Cases Where Improper Operation Poses A Threat To Human Health And Life Or Causes An Accident (Does Not Apply To Random Events Resulting From No Fault Of Contractors). 7) The Ordering Party Has A System For Remote Monitoring And Management Of Street Lighting With The Use Of Rabbit Cpanet Controllers. Before Signing The Contract, The Selected Contractor Will Be Required To Present A Certificate Of Training Of Two People By The Rabbit Company In The Use Of Controllers. 8) Due To The Maintenance Of The Uniformity Of Lighting Fixtures On The Streets And The Preservation Of Lighting Parameters, It Is Recommended To Use: A. Led Luminaires Of The Ampera Mini Type By Schreder, And Digistreet Type By Philips Or Equivalent Meeting The Following Parameters: Requirements For Led Luminaires/Equivalence Criteria: A) The Luminaire Should Have A Degree Of Protection Against Dust And Water Penetration Not Lower Than Ip 66 And Be Equipped With A Regulating The Pressure Inside And Outside The Luminaire, Which Minimizes The Phenomenon Of Water Vapor Condensation, Resistance To Weather Conditions; B) The Body Of The Luminaire Is Made Of Die-Cast Aluminum With Very High Impact Resistance, Min. Ik 08; C) The Luminaires Cover Should Be Made Of Flat, Tempered Glass (Impact Resistance Min. Ik 08); Drainage Of Water And Dirt Deposited On The Luminaire; E) The Luminaire Mounting Pin Should Enable Adjustment Of The Luminaire Inclination; Equipped With A Led Panel Equipped With Diodes With An Emitted Light Color Of 4100K +/- 200K And A Color Rendering Index Of Ra Min. 70;H) The Led Panel Should Be Equipped With A Connection Block, Which Should Enable Its Quick Replacement In Case Of Failure. The Led Panel Should Constitute An Integral Whole And Should Not Be Divided Into Single Modules Connected With Soldered Connections; I) The Luminaire Should Be Equipped With A Group Of Lenses Shaping The Road Light Distribution. Each Diode On The Led Panel Should Have An Individual Optical Element With The Same Characteristics, So That In The Event Of A Diode Burnout, Only The Luminous Flux Emitted By The Luminaire Changes, And Not The Light Distribution (Lighting Uniformity Should Be Maintained Over The Entire Surface Of The Illuminated Road);J) The Luminaire Should Be Equipped With A Power Supply (Controller) Enabling In The Future The Integration Of The Power Reduction System And Individual Management Of The Work Of Each Luminaire And Collecting Information; Operation Planned For 20 Years, The Required Levels Of Lighting Parameters, Eliminating The Overestimation Of These Levels (Including The Power Of Luminaires) In The Initial Period Of Operation In The Case Of Solutions Requiring The Use Of A Design Reserve For Changes In The Luminous Flux During Operation; L) Luminaires Must Have Available Databases For Publicly Available Programs Calculated Lighting Parameters; M) Luminaires Made In Protection Class Ii; N) The Possibility Of Replacing The Power Supply Without Removing The Luminaire From The Pole; O) Power Factor > 0.9; P) Operating Temperature Range From -350C To 450 C; Q) Network Interference Thd < 20%; R) The Construction Of The Luminaire Must Enable Easy Modular Replacement Of Leds And Tool-Free Replacement Of Power Supply Systems; ) Equipped With Devices To Reduce The Generation Of Capacitive Reactive Energy Or Devoid Of Devices Creating Reactive Capacitive Energy;B. Boyen 4 Type Sodium Luminaires By Es-System, Or Equivalent Meeting The Following Parameters: Requirements For Sodium Luminaires/Equivalence Criteria: A) The Body Of The Luminaire Is Made Of Cast Aluminum, Impact Resistance Ik 08; B) The Luminaire Should Have A Degree Of Protection Against Dust And Water Not Less Than Ip 66, In The Case Of A Two-Chamber Structure, Both For The Lamp Chamber And The Accessories Chamber, And Be Equipped With A System That Regulates The Pressure Inside And Outside The Luminaire, Which Minimizes The Phenomenon Of Water Vapor Condensation, Resistance To Weather Conditions;C) Handle Of The Luminaire With A Diameter Of Max. 60Mm. Should Enable A Smooth Change Of The Luminaire Inclination Angle Both On The Extension Arm And Directly On The Pole; D) Luminaires Made In Protection Class Ii; E) Luminaires Should Be Equipped With Ballasts With Thermal Protection; F) It Is Allowed To Use Electronic Ballasts, Excluding High-Frequency Devices G) Luminaires Must Be Equipped With Light Distribution Regulation Implemented By Changing The Relative Position Of The Light Source And Reflector In At Least 3 Marked Positions Documented In Available Databases For Publicly Available Lighting Parameters Calculation Programs; H) Luminaire Cover Made Of A Material With A Strength Of Not Less Ik 08, With Increased Resistance To Uv Radiation;I) Electric Gear Panel Made Of Plastic, Removable Without The Use Of Tools From The Luminaire Mounted On The Pole And Connected To The Power Supply, J) Tool-Free Replacement Of The Light Source And The Gear Panel From The Bottom,K) The Luminaire Reflector Must Be Be Made Of Aluminum As A One-Piece Body, Protected From The Top With A Body. If The Manufacturers Name, Trademark, Patent Or Origin For Specific Materials, Devices, Etc. Has Been Indicated In The Swz Or In Any Other Document, The Employer Requires That Such An Indication Be Treated As An Example And Allows The Use Of Equivalent Products, Materials, Devices, Etc. With Parameters Not Worse Than Those Indicated In The Tor. The Equivalence Of The Products, Materials And Devices Used Will Be Subject To Examination And Assessment. The Burden Of Proving That The Material (Product, Device) Is Equivalent To The Requirement Specified By The Ordering Party Rests With The Contractor. In Such A Case, The Contractor Must Submit, Together With The Offer, Completed Appendix No. 7A - In The Case Of Equivalence Of Led Luminaires, Appendix No. 7B - In The Case Of Equivalence Of Sodium Luminaires Or Appendix No. 7A And 7B In The Case Of Equivalence Of Led Luminaires And Sodium Luminaires, Confirming The Fulfillment Of The Equivalence Conditions Required By Of The Ordering Party. The Employer Informs That Appendix No. 7A And Appendix No. 7B To The Swz Are Not Subject To Supplementation. 9) Material Requirements For Poles: 1. The Buried Pole Must Be Protected Against Corrosion Of The Underground Part And Up To A Height Of 0.5 M Of The Above-Ground Part With An Elastomer Or A Material With Similar Properties In A Color Similar To The Color Of The Pole, 2. Poles Buried In The Ground Must Be Tubular Conical (Convergent) Steel,3. Hot-Dip Galvanized Poles And Booms,4. Poles Adapted To Wind Zone Iii,5. The Pole Must Be Compatible With All Types Of Extension Arms, 6. The Opening Through Which The Cable Is Inserted Into The Pole Should Be Protected (Finished) In A Way That Prevents Damage To The Cable.
