Tenders Are Invited For Thiokol Sealant Brand Vitef-1Nt, Designed For Surface And Intra-Seam Sealing Of Bolted And Rivet Joints, Glazing Elements Of Devices Operating In Ts-1 Fuel At Temperatures From -60 To +1300C. The Sealant Is Recommended For Use In Contact With Anodized And Non-Anodized Aluminum Alloys, Oxidized Magnesium Alloys, Cadmium And Bare Steel. The Sealant Is Designed To Work In All Climatic Conditions. 2. Requirements For The Settlement

Electrical Insulating Heat-Resistant Self-Adhesive Rubber Radiation Vulcanization Tape Brand Letsar Tu 38.103171-80 For Sealing Joints (Seams) And Terminating Cables With Plastic Insulation, For Restoring Semi-Conductive Screens Of Cables With Voltage Up To 35 Kv When They Are Connected And Terminated. Letsar - Electrical Insulating Heat-Resistant Self-Adhesive Rubber Tape. Between The Layers Of The Tape In The Roller, A Polyethylene Tape Of The Nt Brand Is Laid To Prevent Self-Adhesion Of The Layers Of The Letsar Tape. The Tape Has Good Electrical Strength, Heat, Moisture, And Water Resistance, Resistant To Ozone And Ultraviolet Rays, Oils And Chemicals. The Tape Is Able To Stick Together Into A Monolith Without Preheating. It Is Applied To Anticorrosive Protection Of Pipelines With Temperature Of The Transported Product To 1200C. Consisting Of A Carrier Layer And An Insulating Layer Of Radiation-Vulcanized Silicone Rubber Applied To It. As A Carrier Layer, A Polymer-Tar-Bitumen Film (Pdb) Or Fiberglass Impregnated With A Hydrophobizing Solution Of Organosilicon Liquids Can Be Used. 2. Requirements For The Delivered Goods 2.1. The Letsar Tape Must Be Manufactured In Accordance With The Technical Requirements For The Technological Regulations Approved In The Prescribed Manner. 2.2. Letsar Tape Must Comply With Tu 38.103171-80, Be Category 1, Supplied In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Certificate Of Quality). The Shelf Life Of The Product Should Be No More Than 60% Of The Designated Shelf Life., 130 500.00, 4 000.00, 133 500.00, 16 000.00