Tenders Are Invited For Supply & Install Solar Systems

Tenders Are Invited For Supply & Install Solar Systems In Multiple Locations Within Aden Gov. Solar Pv Module: Supply, Install, Test, And Commission Of Solar Tier-1 Pv Modules, The Capacity Is Not Less Than 540-560 W And Should Be Comprised Of Either Mono-Crystalline Or Polycrystalline. - Conformity With Ce And Iec 61215, Iec 61730, Iec 61701 Iec 61215, Iec 61730 Iso 9001: Quality Management System Iso 14001: Environment Management System Iso 45001: Occupational Health And Safety Iec 62941: Design And Manufacture Of Crystalline Silicon Photovoltaic Modules Or Equivalent Standards. - Conversion Efficiency Should Be Not Less Than 20.9% Under Stc. - The Pv Module Shall Perform Satisfactorily In Temperatures Between 40 C To +85 C. - The Rated Output Power Of Any Supplied Module Shall Have A Tolerance Of 0-5 W. - The Module Shall Be Provided With A Junction Box With Ip67. - The Supplied Module Dc Voltage Should Be Not Less Than 1500 Vdc. - The Product Warranty Should Be At Least 10 Years. Solar Inverter: Operating Temperature Range: -10 _ 55 C Inverter Mode: Supply, Install, Test, And Commissioning Of Single Phase, Pure Sine Wave, 230 V, 50Hz As Per Technical Specifications Shall Meet The Following Specifications: - Shall Produce Pure Sine Waveform With Provision For A Battery Charger - Include A Parallel Kit As Required For Three-Phase Operation. - Total Harmonic Distortion Shall Be Less Than 3%. - Designed For Indoor Enclosure Ip 20. - Maximum Efficiency Should Be Not Less Than 88 % At Full Load. - Shall Be Certified To Meet Ce And Ul Marking And Compliant With Iec 62109. - The Device Should Be Integrated With Led Indicators And Lcd Display. - It Shall Allow Adjustment Of Battery Voltage And Charging Current. - The Device Shall Allow Connection To Grid And/Or Backup Generator(S); - The Charging Function Of The Inverter/Charger Shall Include Battery Charging Functionality And Shall Be Wired In Ways That Make Use Of The InverterS Battery Charging Functionality If The Installation Includes Either Mains Power Or A Diesel Generator. - Protections Required: Ac Overload And Load Short Circuit, Overvoltage, Overheating, And Battery Reverse Polarity. Iso 9001: Quality Management System Iso 14001: Environment Management System Iso 45001: Occupational Health And Safety Iec 62941: Design And Manufacture Of Crystalline Silicon - The Work Includes All Protection Breakers For Batteries And Breakers For Entrances And Exits. - Product Warranty Shall Be 5 Years Deadline Submission Date :15 August 2023 12 :00 Pm Tender Link : Https://Yemenhr.Com/Tenders